The Influence of Holding Time on the Microstructure Evolution of Mg–10Zn–6.8Gd–4Y Alloy during Semi-Solid Isothermal Heat Treatment
Open Access
Abstract
A semi-solid microstructure of Mg–10Zn–6.8Gd–4Y alloys is acquired via an isothermal heat treatment process, and the effects of the holding time on the microstructure evolution of Mg–10Zn–6.8Gd–4Y alloys are investigated. The results show that the microstructure of the cast alloy is composed of primary α-Mg dendritic grains with a eutectic structure (W-phase and eutectic Mg) distributed at the grain boundaries. The primary α-Mg dendritic grains grow in size with increasing holding time, and they tend to grow into more globular structures in the initial stage; they then become a bit more dendritic, as small branches grow from the grain boundaries after holding the sample at 580 °C for 10 min. Meanwhile, the interdiffusion of magnesium atoms within the eutectic region, and between the primary α-Mg and eutectic structure, leads to the formation of fine and relatively globular eutectic Mg grains in the eutectic structure after holding for 10 min. The eutectic Mg grains begin to grow, coarsen, coalesce, or be swallowed by the surrounding primary grains, causing fluctuations of the general grain size. Over the whole isothermal heat treatment process, two mechanisms—coalescence and Ostwald ripening—dominate the grain coarsening.Keywords
Funding Information
- National Natural Science Foundation of China (51574058, 51771041, 51774065, 51671044)
- National Key Research and Development Program of China (2016YFB0701203, 2017YFA0403803)
- Fundamental Research Funds for the Central Universities (DUT18RC(3)042)
This publication has 37 references indexed in Scilit:
- Investigation of anisotropic diffusion behavior of Zn in hcp Mg and interdiffusion coefficients of intermediate phases in the Mg–Zn systemCalphad, 2013
- Coarsening in Sintering: Grain Shape Distribution, Grain Size Distribution, and Grain Growth Kinetics in Solid-Pore SystemsCritical Reviews in Solid State and Materials Sciences, 2010
- Effects of semi-solid isothermal process parameters on microstructure of Mg-Gd alloyTransactions of Nonferrous Metals Society of China, 2010
- Effect of holding temperature on microstructure of an AS91 alloy during semisolid isothermal heat treatmentJournal of Alloys and Compounds, 2010
- Self-similar microstructural evolution of dendritic solid–liquid mixtures during coarseningScripta Materialia, 2009
- Quantitative 3D characterization of intermetallic phases in an Al–Mg industrial alloy by X-ray microtomographyScripta Materialia, 2006
- The generation of Mg–Al–Zn alloys by semisolid state mixing of particulate precursorsActa Materialia, 2004
- First stages of grain coarsening in semi-solid Al–Cu alloysScripta Materialia, 2003
- Semi-solid processing of engineering alloys by a twin-screw rheomoulding processMaterials Science and Engineering: A, 2001
- Dendrite coarsening during directional solidification of Al–Cu–Mn alloysMaterials Science and Engineering: A, 1998