Effect of novel benzoxazine reactive diluent on processability and thermomechanical characteristics of bi‐functional polybenzoxazine
- 28 February 2007
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 104 (5) , 2928-2938
Abstract
Effects of a monofunctional benzoxazine diluent (Ph‐a) on properties of a bifunctional benzoxazine resin (BA‐a) have been investigated. The BA‐a/Ph‐a mixtures are miscible in nature rendering the properties highly dependent on their compositions. The viscosity of the BA‐a resin can be reduced to one third using only about 10% by weight the Ph‐a diluent. The addition of the Ph‐a resin into the BA‐a resin can also lower the liquefying temperature of the resin mixtures whereas the gel point is marginally decreased. The gel point, which depends on the BA‐a/Ph‐a mixtures and the cure temperature, was determined by the frequency independence of loss tangent in the vicinity of the sol‐gel transition. The relaxation exponent values of the copolymer were found to be 0.24–0.55, which is dependent on the cure temperature. Gel time of the BA‐a/Ph‐a systems decreases with increasing temperature according to an Arrhenius relation with activation energy of 60.6 ± 1.5 kJ/mol. Flexural moduli of the BA‐a/Ph‐a polymers also increase with the Ph‐a mass fraction, however, with the sacrifice of their flexural strength and glass‐transition temperature. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007Keywords
This publication has 33 references indexed in Scilit:
- High performance wood composites from highly filled polybenzoxazineJournal of Applied Polymer Science, 2005
- Performance improvement of polybenzoxazine by alloying with polyimide: effect of preparation method on the propertiesPolymer, 2005
- Toughening of polybenzoxazine by alloying with urethane prepolymer and flexible epoxy: A comparative studyPolymer Engineering & Science, 2005
- Thermal and mechanical interfacial properties of the DGEBA/PMR-15 blend systemJournal of Colloid and Interface Science, 2004
- Synthesis and characterization of poly(urethane-benzoxazine) films as novel type of polyurethane/phenolic resin compositesJournal of Polymer Science Part A: Polymer Chemistry, 2000
- Development of new class of electronic packaging materials based on ternary systems of benzoxazine, epoxy, and phenolic resinsPolymer, 2000
- Very high thermal conductivity obtained by boron nitride-filled polybenzoxazineThermochimica Acta, 1998
- New epoxy-unsaturated polyester resin copolymersReactive and Functional Polymers, 1997
- Mechanical characterization of copolymers based on benzoxazine and epoxyPolymer, 1996
- Physical and mechanical characterization of near-zero shrinkage polybenzoxazinesJournal of Polymer Science Part B: Polymer Physics, 1996