Surface texture and wear characteristics of micro-hybrid and nano-hybrid resin composites under simulated frictional conditions
Open Access
- 19 April 2026
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1)
Abstract
The goal of work was to evaluate the surface texture and wear behaviour of two resin-based composites – AP-X (micro-hybrid) and FSE (nano-hybrid), under two frictional conditions. Specimens were subjected to simulated occlusal wear using the ACTA wear machine, following two-body wear (full contact) and three-body wear (slurry-lubricated) protocols. Surface texture was assessed before and after wear using 3D profilometry and SEM. Roughness parameters and wear rate were measured. SEM micrographs provided insights into wear mechanisms. Initial surface roughness of FSE was higher than AP-X due to nanocluster morphology (Ra: 0.965–1.050 μm vs. 0.470–0.489 μm; Sq: 1.25–1.32 μm vs. 0.554–0.667 μm ). Two-body wear caused significant degradation in FSE, including nanocluster plucking and matrix cracking, whereas AP-X showed more stable wear resistance. Under three-body wear, FSE demonstrated a polishing effect (Ra reduced to 0.564 μm; Sq reduced to 0.766 μm), while AP-X experienced increased surface roughness (Ra increased to 0.966 μm; Sq increased to 0.869 μm) due to macro-filler exposure. Wear analysis confirmed higher material loss under three-body friction conditions. FSE exhibited better performance under slurry-lubricated conditions but was more susceptible to fatigue-driven degradation in full contact. Conversely, AP-X demonstrated superior stability under two-body wear, making it more suitable for bruxers.Keywords
This publication has 27 references indexed in Scilit:
- On the suitability of photocuring-assisted DIW for manufacturing complex prosthesis from commercial dental compositesJournal of Materials Science: Materials in Medicine, 2024
- Evaluation of wear behavior of dental restorative materials against zirconia in vitroDental Materials, 2022
- Identification and modelling of applicable wear conditions for stir cast Al-compositeFriction, 2019
- An approach to understanding tribological behaviour of dental composites through volumetric wear loss and wear mechanism determination; beyond material rankingJournal of Dentistry, 2017
- A new concept and finite-element study on dental bond strength testsDental Materials, 2016
- Contact- and contact-free wear between various resin compositesDental Materials, 2015
- Resin composite—State of the artDental Materials, 2011
- Investigations on mechanical behaviour of dental compositesClinical Oral Investigations, 2009
- An application of the QM-QSAR method to predict and rationalize lipophilicity of simple monomersDental Materials, 2005
- Killing of cariogenic bacteria by light from a gallium aluminium arsenide diode laserJournal of Dentistry, 1994