A Brief Study of Unconventional Variants of GMAW Welding: Parameters, Weld Bead, and Microstructures
Open Access
- 23 June 2022
- book chapter
- Published by IntechOpen
Abstract
The GMAW (Gas Metal Arc Welding) process is an electric arc welding technique widely used around the world due to its ease of use, low equipment cost and, mainly, due to the high deposition rate, the quality of the metal of solder, which makes it versatile and susceptible to modification. Thus, variants such as CW-GMAW (Cold Wire–Gas Metal Arc Welding), DCW-GMAW (Double Cold Wire–Gas Metal Arc Welding), and HW-GMAW (Hot Wire–Gas Metal Arc Welding) emerged from the conception of small adaptations to the original process that ended up generating better and more adjusted results than GMAW. Thus, variations of some parameters will be shown and their respective effects on the weld bead geometry, dilution, penetration, deposition rate, in addition to the effects on macro and microstructure. This provides the possibility of using the variants in different types of applications in the industry in general. Where the application in narrow 4 mm chamfer has already been observed, reduction of residual stresses, increase in fatigue resistance and coatings with special alloys.Keywords
This publication has 20 references indexed in Scilit:
- Hot wire-assisted gas metal arc welding of hypereutectic FeCrC hardfacing alloys: Microstructure and wear propertiesSurface and Coatings Technology, 2018
- Residual stresses in cold-wire gas metal arc weldingScience and Technology of Welding and Joining, 2017
- Feasibility of narrow gap welding using the cold-wire gas metal arc welding (CW-GMAW) processWelding in the World, 2017
- Fatigue life assessment of weld joints manufactured by GMAW and CW-GMAW processesScience and Technology of Welding and Joining, 2017
- Weld Microstructures2017
- Additive manufacturing with GMAW welding and CMT technologyProcedia Manufacturing, 2017
- Revestimento de Níquel Depositado pela Soldagem MIG e MIG com Arame FrioSoldagem & Inspeção, 2016
- Adaptive control of deposited height in GMAW-based layer additive manufacturingJournal of Materials Processing Technology, 2014
- Welding processes for wear resistant overlaysJournal of Manufacturing Processes, 2014
- Effect of aluminium content on acicular ferrite formation in low carbon steel weld metalsScience and Technology of Welding and Joining, 2013