Abstract
A novel FPGA-based multi-measurement scheme Time-to-Digital Converter (TDC) architecture, termed Hybrid Wave Union (HWU), is proposed. By integrating the advantages of the Wave Union A and Wave Union B methods, the designed TDC launches a ripple with multiple transitions along the tapped delay line (TDL) and samples it with a D flip-flop (DFF) array across consecutive system clock cycles upon the arrival of a rising edge, yielding two complementary snapshots. Each snapshot is encoded into fine timestamps through a pipeline encoder, and the resulting timestamp pairs are processed by an iterative Z-type calibration algorithm that reconstructs accurate delay intervals without requiring any predefined knowledge of the relative ordering of delay durations. The design is implemented on a Xilinx Kintex-7 FPGA, with a measured on-chip power consumption of 42 mW per channel, including 6 mW for the TDL and DFF bank, 31 mW for the encoder and packetization logic, and 5 mW shared across all TDC channels for the coarse time counter. Experimental results demonstrate an average RMS timing precision of 4.4 ps and a dead time of only three clock cycles—two for snapshot acquisition and one for TDL reset—significantly shorter than that of conventional Wave Union B TDCs. Compared to traditional TDL TDC architectures, the proposed HWU TDC achieves high timing precision, low resource utilization, and energy-efficient operation, making it well suited for multi-channel, high-precision applications in modern high-energy physics experiments.
Funding Information
  • Fundamental Research Funds for the Central Universities (KY2030000162)

This publication has 43 references indexed in Scilit: