Miniature 3D-printed rod-like refractive objective for endoscopic applications
Open Access
- 1 March 2026
- journal article
- imaging
- Published by SPIE-Intl Soc Optical Eng in Journal of Biomedical Optics
- Vol. 31 (03) , 1-12
Abstract
SignificanceThe three-dimensional (3D)-printed refractive rod objective for endoscopy preserves the compact, gradient index (GRIN)-like format while delivering a wide field of view (FOV) comparable to its diameter and larger than that of a commercial GRIN lens.AimWe focus on the design, fabrication, and experimental validation of a proof-of-concept refractive rod objective for fluorescence imaging of mouse colon tissue, with performance compared with a commercial GRIN lens.ApproachA 1× magnification refractive rod-like objective was designed in Zemax OpticStudio and fabricated using two-photon polymerization additive manufacturing. The objective consists of a sequence of convex refractive surfaces printed in contact at their vertices, with refractive index contrast provided by partially or non-polymerized resin contained within an enclosing wall. The lens has a diameter of 500 μm with a clear aperture of 470 μm, a total length of 2.06 mm, and a working distance of 1.6 mm and was optimized for a numerical aperture of 0.075 and a 500-μm design field at 525-nm light. Three photopolymer resins (IP-S, IP-Visio, and IPX-Clear) were evaluated through excitation–emission matrix measurements to assess autofluorescence. By imaging group 7, element 6 of a 1951 United States Air Force (USAF) resolution target, the field was assessed by plot profile and modulation transfer function measurements.ResultsThe fabricated objective resolved group 7, element 6 of a USAF resolution target (4.38 μm), closely matching the theoretical diffraction-limited resolution of 4.27 μm. Compared with a commercial 600-μm-diameter GRIN lens, the 3D-printed objective achieved a substantially larger FOV (498 versus 188 μm). Spectral characterization showed that IP-Visio exhibited the lowest autofluorescence under 455-nm excitation when unpolymerized resin was present. Using an IP-Visio objective, fluorescence images of proflavine-stained mouse colon tissue were successfully acquired.ConclusionsThe demonstrated refractive rod-like objective combines the compact geometry of a GRIN lens with the aberration correction capability of multi-element refractive optics, enabling uniform resolution across a large FOV. The approach also allows material selection tailored to fluorescence imaging requirements. Future work will focus on integration with fiber bundles and on fully polymerized designs with spatially tuned refractive index for improved long-term stability.Keywords
Funding Information
- Houston Methodist-Rice Enrich Multi-Year Seed Program
- Northrop Grumman Gift
- National Institutes of Health (R21EY035108)
This publication has 13 references indexed in Scilit:
- Geometric transformation adaptive optics (GTAO) for volumetric deep brain imaging through gradient-index lensesNature Communications, 2024
- Mechanically loaded GRIN lens for endoscopyOptics Express, 2023
- Complex aspherical singlet and doublet microoptics by grayscale 3D printingOptics Express, 2023
- Characterizing close-focus lenses for microendoscopyJournal of Optical Microsystems, 2023
- Adaptive optics two-photon endomicroscopy enables deep-brain imaging at synaptic resolution over large volumesScience Advances, 2020
- Toward development of a large field-of-view cancer screening patch (CASP) to detect cervical intraepithelial neoplasiaBiomedical Optics Express, 2019
- Adaptive aberration correction of GRIN lenses for confocal endomicroscopyOptics Letters, 2011
- Design, assembly, and optical bench testing of a high-numerical-aperture miniature injection-molded objective for fiber-optic confocal reflectance microscopyApplied Optics, 2006
- Gradient-index rod lens made by a double ion-exchange processApplied Optics, 1988
- Gradient-index optics: a reviewApplied Optics, 1980