Microstructure and Tribological Properties of Fe-Based-Al2O3-B4C Composite Coatings Prepared by High-Velocity Arc Spraying
Open Access
Abstract
Fe-based-Al2O3-B4C coating was prepared on the low-carbon steel substrates using high-velocity arc spraying. The effects of voltage, current, and distance on the porosity and microhardness of the coating were studied by an orthogonal test, and the optimum spraying parameters were determined. The microstructure and properties of Fe-based-Al2O3-B4C coatings prepared under optimum process parameters were characterized by X-ray diffractometer (XRD), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), microhardness and friction wear tester. The results showed that the optimum process parameters were a spraying voltage of 41 V, a spraying current of 200 A, and a spraying distance of 150 mm. The porosity was 2.24 ± 0.32%, and the microhardness was 1543 ± 145 Hv0.1, which was 8 times that of the substrate. Under the same load of 4.2 N and varying sliding speeds of 500 t/min, 750 t/min, and 1000 t/min, the coefficient of friction of the coating was less than that of the low-carbon steel, and the wear rate of the coating was 65%, 70%, and 63% lower than that of the low-carbon steel, respectively. The main wear mechanism of the coating was material spalling, accompanied by slight oxidative wear and abrasive wear.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (XUEKEN2022016, BE2020311, 52109091)
- Jiangsu Provincial key research and development plan (XUEKEN2022016, BE2020311, 52109091)
- National Natural Science Foundation of China (XUEKEN2022016, BE2020311, 52109091)
This publication has 47 references indexed in Scilit:
- Reactive plasma spraying synthesis and characterization of TiB2–TiC–Al2O3/Al composite coatings on a magnesium alloyJournal of Alloys and Compounds, 2014
- Microstructure and Corrosion Resistance of Fe-Based Coatings Prepared by Twin Wires Arc Spraying ProcessJournal of Thermal Spray Technology, 2013
- Influence of Spraying Parameters on the Microstructure and Properties of Plasma-sprayed Al2O3/40%TiO2 CoatingPhysics Procedia, 2013
- Wear behavior of HVOF-sprayed Fe-based amorphous coatingsIntermetallics, 2012
- Spraying Distance Dependence of Microhardness on HVOF WC-Co CoatingsAdvanced Materials Research, 2011
- Tribological behavior of B4C reinforced Fe-base bulk metallic glass composite coatingSurface and Coatings Technology, 2010
- Synthesis and characterization of aluminum oxide–boron carbide coatings by air plasma sprayingCeramics International, 2010
- Atmospheric plasma spraying of yttria-stabilized zirconia coatings with specific porositySurface and Coatings Technology, 2009
- Formation of bulk (Zr, Ti)-based metallic glassesJournal of Non-Crystalline Solids, 1999
- Ferromagnetic bulk amorphous alloysMetallurgical and Materials Transactions A, 1998