Numerical simulation of deformation of flexible ring on power rolling ring
Open Access
- 16 July 2026
- journal article
- Published by JVE International Ltd. in Vibroengineering PROCEDIA
- Vol. 63, 246-251
Abstract
In this paper, the influence of the deformation of the flexible ring on the performance of the power rolling ring is studied by the finite element simulation method. The results show that the maximum stress of the flexible ring is concentrated in the contact area with the inner and outer conductive rings, and the maximum bending stress increases significantly from 93.5 MPa to 217 MPa with the increase of deformation from 0.3 mm to 0.7 mm. On the other hand, with the increase of deformation, the oscillation of the velocity curve of the probe point on the flexible ring is weakened and tends to be smooth, indicating that the stability of the motion is gradually improved. The research reveals that increasing the deformation can improve the motion stability and also lead to a significant increase in the contact stress, which provides an important basis for the balance design between structural reliability and motion stability of the power rolling ring.Keywords
This publication has 6 references indexed in Scilit:
- Multi-channel signal transmission method of non-contact slip ring based on capacitive coupling and quasi-time division multiplexingReview of Scientific Instruments, 2019
- Experimental investigation of the electrical contact characteristics in Rolling Contact Connector2015
- Numerical research on the electrical contact model and thermal analysis of the Roll-Ring2013
- Huge US market for green chemicals may await Novozymes and DaniscoFocus on Catalysts, 2009
- Optical slip ring for sensor interface applications2006
- US EPA's effluent guidelines for water treatmentMembrane Technology, 2004