Micro Coriolis Mass Flow Sensor with Large Channel Diameter Realized by HNA Wet Etching
Open Access
Abstract
This paper introduces a Coriolis mass flow and density sensor. The sensor is made using Surface Channel Technology (SCT) but with selective wet etching to create the channels. This method forms suspended microfluidic channels with a larger cross-sectional area. Because of this larger cross-sectional area, the sensor has a much higher flow range, up to 50 (for water) with a pressure drop of 1 bar, compared to the standard SCT-based Coriolis sensor, which is only 1.2 . The channel has a semi-elliptical cross-sectional area, measuring 200 micrometers wide and 70 micrometers deep. The channel wall is made of a stack of thin films with a total thickness of 2.5 . Water, isopropyl alcohol (IPA), and nitrogen (N2) are used to test and evaluate the sensor’s mass flow and density sensing performance.
Keywords
Funding Information
- Bronkhorst High-Tech BV
- TKI HTSM
This publication has 28 references indexed in Scilit:
- SU–8 micro coriolis mass flow sensorSensors and Actuators B: Chemical, 2017
- Improved capacitive detection method for Coriolis mass flow sensors enabling range/sensitivity tuningMicroelectronic Engineering, 2016
- Experimental Study on Etching Characteristics of a Spin-Etching MethodJournal of Microelectromechanical Systems, 2015
- Flow measurement in mechanical ventilation: A reviewMedical Engineering & Physics, 2015
- Optimization of a micro Coriolis mass flow sensor using Lorentz force actuationSensors and Actuators A: Physical, 2012
- Modeling, design, fabrication and characterization of a micro Coriolis mass flow sensorJournal of Micromechanics and Microengineering, 2010
- A versatile surface channel concept for microfluidic applicationsJournal of Micromechanics and Microengineering, 2007
- High-Speed MEMS-Based Gas ChromatographyJournal of Microelectromechanical Systems, 2006
- A silicon resonant sensor structure for Coriolis mass-flow measurementsJournal of Microelectromechanical Systems, 1997
- Vibration modes of a resonant silicon tube density sensorJournal of Microelectromechanical Systems, 1996