Shixing Teng
Research Subjects
Shixing Teng has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
Bao Lei
1 shared publicationChen Qian
1 shared publication- Gang Wang
Energy‐Saving Building Materials Collaborative Innovation Center of Henan Province Xinyang Normal University Xinyang P. R. China
1 shared publication - Hongling Guo
Tianjin University of Technology
1 shared publication - Jinshui Cheng
Institute of Photoelectronic Thin Film Devices and Technology State Key Laboratory of Photovoltaic Materials and Cells Tianjin Key Laboratory of Efficient Solar Energy Utilization Ministry of Education Engineering Research Center of Thin Film Photoelectronic Technology Nankai University Tianjin China
1 shared publication - Liang Fang
Key Laboratory of Materials Physics, Anhui Key Laboratory of Nanomaterials and Nanotechnology, CAS Center for Excellence in Nanoscience, Institute of Solid State Physics, HFIPS Chinese Academy of Sciences Hefei 230031 China
1 shared publication
Latest Publications
- Open Access
- 13 July 2026
- Published by Elsevier in SSRN Electronic Journal
Sb2O3-mediated surface reconstruction enables open-air fabrication of Sb2S3 solar cells with record efficiency and fill factor
Inert atmospheres suppress oxidation in high-performance Cu(In,Ga)(S,Se)2, Cu2ZnSn(S,Se)4 and Sb2(S,Se)3 solar-cell fabrication, however, they substantially increase processing costs and severely limit the scalability of these technologies. Although ambient annealing has been achieved for Cu(In,Ga)S2 and Cu2ZnSnS4 as-prepared films, the selenization process still needs an inert atmosphere. The low melting point of Sb2S3 makes open-air annealing feasible, yet the annealing temperature of approximately 360 °C inevitably induces severe surface oxidation. Beyond this processing challenge, the performance of Sb2S3 solar cells remains limited by low fill factors (< 64.0%). Here we report an open-air annealing strategy coupled with hydrothermal sulfuration for efficient Sb2S3 solar cells with a record fill factor. A cracked Sb2O3 layer is formed on the Sb2S3 surface during open-air annealing. Subsequent hydrothermal sulfuration, conducted under an air atmosphere, converts Sb2O3 into Sb2S3 and induces nanorod-like protrusion reconstruction at the absorber surface, which reduces the hole-transport barrier and enhances hole extraction. As a result, we achieve a record efficiency of 7.25% for open-air-fabricated Sb2S3 solar cells, with the fill factor exceeding 66.0% for the first time. This work offers a low-cost route for scalable high-performance Sb2S3 solar cells and establishes robust Sb2O3-mediated surface reconstruction to overcome fill-factor losses.
- 13 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSb2O3-mediated surface reconstruction enables open-air fabrication of Sb2S3 solar cells with record efficiency and fill factor
Inert atmospheres suppress oxidation in high-performance Cu(In,Ga)(S,Se)2, Cu2ZnSn(S,Se)4 and Sb2(S,Se)3 solar-cell fabrication, however, they substantially increase processing costs and severely limit the scalability of these technologies. Although ambient annealing has been achieved for Cu(In,Ga)S2 and Cu2ZnSnS4 as-prepared films, the selenization process still needs an inert atmosphere. The low melting point of Sb2S3 makes open-air annealing feasible, yet the annealing temperature of approximately 360 °C inevitably induces severe surface oxidation. Beyond this processing challenge, the performance of Sb2S3 solar cells remains limited by low fill factors (< 64.0%). Here we report an open-air annealing strategy coupled with hydrothermal sulfuration for efficient Sb2S3 solar cells with a record fill factor. A cracked Sb2O3 layer is formed on the Sb2S3 surface during open-air annealing. Subsequent hydrothermal sulfuration, conducted under an air atmosphere, converts Sb2O3 into Sb2S3 and induces nanorod-like protrusion reconstruction at the absorber surface, which reduces the hole-transport barrier and enhances hole extraction. As a result, we achieve a record efficiency of 7.25% for open-air-fabricated Sb2S3 solar cells, with the fill factor exceeding 66.0% for the first time. This work offers a low-cost route for scalable high-performance Sb2S3 solar cells and establishes robust Sb2O3-mediated surface reconstruction to overcome fill-factor losses.