High Power Density Medium-Voltage Converter Integration via Electric Field Management
- 24 August 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 10 (1) , 895-905
Abstract
SiC-based converters can achieve much higher voltage rating and power density than Si- based ones. Therefore, electric field (E-field) intensity inside SiC-based converters can become significantly high and initial partial discharges, especially along the exposed metal or insulator to air interfaces. To achieve discharge free by design, E-field intensity and insulation space in air need be carefully analyzed and well managed. Due to the complicated structure of power converters, sharp edges and corners cannot be fully avoided. Thus, E-field management should be considered for such critical regions, in order to make the E-field distribution more uniform and shrink the insulation size. In this article, by using the self-made medium-voltage power electronics building block (PEBB) as an example, critical regions for insulation design are identified. Then focusing on the region between the cooling system and the heatsink, the influence on E-field distribution with different guard rings’ shape, size, and location, is demonstrated. Following the simulation analysis and design comparison, six guard rings are fabricated and experimentally verified. Therefore, a methodology about E-field management for power converters is provided in this article, including critical region analysis, design comparison, guard ring fabrication, and experimental verification.Keywords
Funding Information
- U.S. Office of Naval Research (N00014-16-1-2956, DCN #43-7802-21)
This publication has 21 references indexed in Scilit:
- Design and Experimental Testing of a Resonant DC–DC Converter for Solid-State TransformersIEEE Transactions on Power Electronics, 2016
- Insulation coordination for a modular multilevel converter prototype2016
- Externally-fed auxiliary power supply of MMC converter cells2016
- Power Loss Analysis of Medium Voltage Three-Phase Converters using 15 kV/40 A SiC N-IGBTIEEE Journal of Emerging and Selected Topics in Power Electronics, 2016
- Effects of filler content on dielectric properties of epoxy/SrTiO3 and epoxy/BaTiO3 composites2015
- Integration technologies for a medium voltage modular multi-level converter with hot swap capability2015
- Auxiliary power supply for medium-voltage modular multilevel converters2015
- Simulation of the electric field strength in the vicinity of metallization edges on dielectric substratesIEEE Transactions on Dielectrics and Electrical Insulation, 2015
- Research on corona inception electric-field strength and critical electric-field values for valve hall fittings2014
- Effects of humidity on corona inception in a diverging electric fieldIEE Proceedings A Physical Science, Measurement and Instrumentation, Management and Education, Reviews, 1981