Selective actinide(III) separation using 2,6-bis[1-(propan-1-ol)-1,2,3-triazol-4-yl]pyridine (PyTri-Diol) in the innovative-SANEX process: laboratory scale counter current centrifugal contactor demonstration
Authors:
- Andreas WildenAndreas Wilden
- Dimitri SchneiderDSDimitri Schneider
- Zaina PaparigasZPZaina Paparigas
- Maximilian HenkesMHMaximilian Henkes
- Fabian KreftFKFabian Kreft
- Andreas GeistAGAndreas Geist
- Eros MossiniEMEros Mossini
- Elena MacerataEMElena Macerata
- Mario MarianiMMMario Mariani
- Maria Chiara GulloMGMaria Chiara Gullo
- Alessandro CasnatiACAlessandro Casnati
- Giuseppe ModoloGMGiuseppe Modolo
Open Access
- 21 April 2022
- journal article
- research article
- Published by Walter de Gruyter GmbH in Radiochimica Acta
- Vol. 110 (6-9) , 515-525
Abstract
An innovative-SANEX process for the selective separation of the trivalent actinides americium and curium from a simulated PUREX raffinate solution was successfully demonstrated on the laboratory scale using a 16-stage 1 cm annular centrifugal contactor setup. The solvent was composed of 0.2 mol L−1 N,N,N′,N′-tetra-n-octyl-diglycolamide (TODGA) and 5% v/v 1-octanol in a kerosene diluent. Zr(IV) and Pd(II) co-extraction was prevented using trans-1,2-diaminocyclohexane-N,N,N′,N′-tetraacetic acid (CDTA) as a masking agent in the feed. The actinide(III) selective back-extraction was achieved using 2,6-bis[1-(propan-1-ol)-1,2,3-triazol-4-yl]pyridine (PyTri-Diol) in 0.45 mol L−1 HNO3 as a CHON alternative to the sulfur-containing stripping agent used in a previous version of the innovative-SANEX process. The new process described in this paper showed excellent performance for the recovery of An(III). An An(III) product with a quasi-quantitative recovery of americium and curium (≥99.9%) and very good separation from fission and activation products was obtained (decontamination factors ≥4000). Only a slight contamination with Zr and Ru was observed. This test demonstrates the successful use of molecules containing only carbon, hydrogen, oxygen, and nitrogen atoms (so-called CHON molecules) for the selective separation of An(III) from a simulated PUREX raffinate solution. By avoiding sulfur- or phosphorous-containing molecules, the generation of secondary radioactive waste during process operation can be reduced drastically.Keywords
This publication has 55 references indexed in Scilit:
- Study of the Mass Transfer Behavior in a Centrifugal Contactor and Verification of the Solvent Extraction Model for the SX Process ProgramSolvent Extraction and Ion Exchange, 2013
- Use of Polyaminocarboxylic Acids as Hydrophilic Masking Agents for Fission Products in Actinide Partitioning ProcessesSolvent Extraction and Ion Exchange, 2012
- Chemistry of Diglycolamides: Promising Extractants for Actinide PartitioningChemical Reviews, 2011
- Aqueous Partitioning of Minor Actinides by Different ProcessesSeparation & Purification Reviews, 2011
- Extraction of Nitric Acid into Alcohol: Kerosene MixturesSolvent Extraction and Ion Exchange, 2010
- Design Principles and Applications of Centrifugal Contactors for Solvent Extraction2009
- Demonstration of a TODGA based Extraction Process for the Partitioning of Minor Actinides from a PUREX RaffinateSolvent Extraction and Ion Exchange, 2009
- Demonstration of a TODGA‐Based Continuous Counter‐Current Extraction Process for the Partitioning of Actinides from a Simulated PUREX Raffinate, Part II: Centrifugal Contactor RunsSolvent Extraction and Ion Exchange, 2008
- LIQUID-LIQUID EXTRACTION OF METAL IONS WITH AMIDO PODANDSSolvent Extraction and Ion Exchange, 1991
- LIQUID-LIQUID EXTRACTION OF STRONTIUM WITH AMIDO PODANDSSolvent Extraction and Ion Exchange, 1991