Elena Macerata
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Elena Macerata has a total of 188 co-authors. Here are the top co-authors by number of shared publications:
- Mario Mariani
Department of Energy, Nuclear Engineering Division, Politecnico di Milano, 20156 Milano, Italy
39 shared publications - Eros Mossini
Department of Energy, Nuclear Engineering Division, Politecnico di Milano, 20156 Milano, Italy
21 shared publications - Alessandro Casnati
Department of Chemistry Life Sciences and Environmental Sustainability University of Parma Parma Italy
15 shared publications Marco Giola
Department of Energy, Politecnico di Milano, Milan, Italy
10 shared publications- Andrea Mele
Politecnico di Milano
9 shared publications M. Giola
Department of Energy, Politecnico di Milano, Piazza L. da Vinci 32, I-20133 Milano, Italy
7 shared publications
Latest Publications
- Open Access
- 21 January 2026
- Published by Elsevier in Materials Today Communications
- Vol. 51
Effect of gamma irradiation on chemico/physical properties and enzymatic hydrolysis of poly(butylene 2,5-furanoate) based films
- 21 January 2026
- Published by Elsevier in Materials Today Communications
- Vol. 51
Open AccessEffect of gamma irradiation on chemico/physical properties and enzymatic hydrolysis of poly(butylene 2,5-furanoate) based films
- Open Access
Suitability of Polyacrylamide-Based Dosimetric Gel for Proton and Carbon Ion Beam Geometric Characterization
Experimental measurement of dose distributions is a pivotal step in the quality assurance of radiotherapy treatments, especially for those relying on high delivery accuracy such as hadron therapy. This study investigated the response of a polymer gel dosimeter to determine its suitability in performing geometric beam characterizations for hadron therapy under high-quenching conditions. Different extraction energies of proton and carbon ion beams were considered. Gel dose–response linearity and long-term stability were confirmed through optical measurements. Gel phantoms were irradiated with pencil beams and analyzed via magnetic resonance imaging. A multi-echo T2-weighted sequence was used to reconstruct depth–dose profiles and transversal distributions acquired by the gels, which were benchmarked against reference data. As expected, a response-quenching effect in the Bragg peak region was noted. Nonetheless, the studied gel formulation proved reliable in acquiring the geometric characteristics of the beams, even without correcting for the quenching effect. Indeed, depth–dose distributions acquired by the gels showed an excellent agreement with measured particle range with respect to reference values, with mean discrepancies of 0.5 ± 0.2 mm. Single-spot transverse FWHM values at increasing depths also presented an average agreement within 1 mm with values determined with radiochromic films, thus supporting the excellent spatial resolving capabilities of the dosimetric gel.
Open AccessSuitability of Polyacrylamide-Based Dosimetric Gel for Proton and Carbon Ion Beam Geometric Characterization
Experimental measurement of dose distributions is a pivotal step in the quality assurance of radiotherapy treatments, especially for those relying on high delivery accuracy such as hadron therapy. This study investigated the response of a polymer gel dosimeter to determine its suitability in performing geometric beam characterizations for hadron therapy under high-quenching conditions. Different extraction energies of proton and carbon ion beams were considered. Gel dose–response linearity and long-term stability were confirmed through optical measurements. Gel phantoms were irradiated with pencil beams and analyzed via magnetic resonance imaging. A multi-echo T2-weighted sequence was used to reconstruct depth–dose profiles and transversal distributions acquired by the gels, which were benchmarked against reference data. As expected, a response-quenching effect in the Bragg peak region was noted. Nonetheless, the studied gel formulation proved reliable in acquiring the geometric characteristics of the beams, even without correcting for the quenching effect. Indeed, depth–dose distributions acquired by the gels showed an excellent agreement with measured particle range with respect to reference values, with mean discrepancies of 0.5 ± 0.2 mm. Single-spot transverse FWHM values at increasing depths also presented an average agreement within 1 mm with values determined with radiochromic films, thus supporting the excellent spatial resolving capabilities of the dosimetric gel.
- Open Access
- 13 September 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (18) , 8241
An Integrated Strategy for Pre-Disposal of Spent Cation-Exchange Resins by Repurposing Industrial By-Products
Large amounts of spent, radioactive, ion-exchange resins have been generated worldwide, and their production is expected to grow due to a renaissance of nuclear power. Such waste is being stored at individual plant sites around the world, awaiting a reliable disposal route to overcome the downsides of the state-of-the-art management approaches. In this work, a first-of-its-kind pre-disposal strategy is proposed, based on the integration of a heterogeneous Fenton-like treatment with conditioning in an alkali-activated matrix. In particular, the circular economy is pursued by repurposing two industrial by-products, coal fly ash and steel slag, both as catalysts of the Fenton treatment and precursors of the conditioning matrix. The obtained waste forms have been preliminarily tested for leaching and compressive strength according to the Italian waste acceptance criteria for disposal. The proposed technology, tested at laboratory scale up to 100 g of virgin cationic resin, has proven successful in decomposing the waste and synthesizing waste forms with an overall volume increase of only 30%, thereby achieving a remarkable result compared to state-of-the-art technologies.
- 13 September 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (18) , 8241
Open AccessAn Integrated Strategy for Pre-Disposal of Spent Cation-Exchange Resins by Repurposing Industrial By-Products
Large amounts of spent, radioactive, ion-exchange resins have been generated worldwide, and their production is expected to grow due to a renaissance of nuclear power. Such waste is being stored at individual plant sites around the world, awaiting a reliable disposal route to overcome the downsides of the state-of-the-art management approaches. In this work, a first-of-its-kind pre-disposal strategy is proposed, based on the integration of a heterogeneous Fenton-like treatment with conditioning in an alkali-activated matrix. In particular, the circular economy is pursued by repurposing two industrial by-products, coal fly ash and steel slag, both as catalysts of the Fenton treatment and precursors of the conditioning matrix. The obtained waste forms have been preliminarily tested for leaching and compressive strength according to the Italian waste acceptance criteria for disposal. The proposed technology, tested at laboratory scale up to 100 g of virgin cationic resin, has proven successful in decomposing the waste and synthesizing waste forms with an overall volume increase of only 30%, thereby achieving a remarkable result compared to state-of-the-art technologies.
- 9 September 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (73) , 13968-13971
A preorganized triarmed bis-triazolylpyridine-calix[4]arene with high affinity and selectivity for minor actinides for nuclear waste treatment
Preorganizing three terdentate bistriazolylpyridines on a calix[4]arene matches the number of N-donors in the ligand with the coordination number of the trivalent actinide cations, giving an entropic advantage that fosters efficiency and selectivity.
- 9 September 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 61 (73) , 13968-13971
A preorganized triarmed bis-triazolylpyridine-calix[4]arene with high affinity and selectivity for minor actinides for nuclear waste treatment
Preorganizing three terdentate bistriazolylpyridines on a calix[4]arene matches the number of N-donors in the ligand with the coordination number of the trivalent actinide cations, giving an entropic advantage that fosters efficiency and selectivity.
- Open Access
- 11 May 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (20) , 10347-10351
iRE-SOLVE Process for the Pre-Disposal Management of Spent Ion-Exchange Resins
- 11 May 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (20) , 10347-10351
Open AccessiRE-SOLVE Process for the Pre-Disposal Management of Spent Ion-Exchange Resins
- Open Access
- 3 November 2023
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 333 (7) , 3603-3608
A radiochemistry laboratory exercise: determination of uranium in tap water by solvent extraction and liquid scintillation counting
Environmental radiochemistry is a key pillar of the education of nuclear engineering students and young professionals. Teaching the fundamentals of this multidisciplinary field is best performed also through well-designed hands-on experiments. A simple and fast radiochemical procedure has been developed to determine uranium in tap water by liquid scintillation counting. The proposed method provides reliable and repeatable results, with accuracy and precision within 5%. It can be proficiently executed by undergraduate students, who have appreciated the engagement and got acquainted with standard analysis protocols, from sample collection and manipulation to radiometric measure and data analysis.
- 3 November 2023
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 333 (7) , 3603-3608
Open AccessA radiochemistry laboratory exercise: determination of uranium in tap water by solvent extraction and liquid scintillation counting
Environmental radiochemistry is a key pillar of the education of nuclear engineering students and young professionals. Teaching the fundamentals of this multidisciplinary field is best performed also through well-designed hands-on experiments. A simple and fast radiochemical procedure has been developed to determine uranium in tap water by liquid scintillation counting. The proposed method provides reliable and repeatable results, with accuracy and precision within 5%. It can be proficiently executed by undergraduate students, who have appreciated the engagement and got acquainted with standard analysis protocols, from sample collection and manipulation to radiometric measure and data analysis.
- 3 October 2023
- Published by ASME International
Nuclear Waste Treatment: Vitrification of Iron-Phosphate Sludge
Within the framework of developing advanced processes for nuclear waste treatment, Ansaldo Nucleare is developing and testing an innovative technology to perform the conditioning of radioactive ferrous waste materials, classified as Low and Intermediate Level Waste (LILW), resulting from decommissioning activities of Nuclear Facilities. This technology is based on a patented process dedicated to the treatment of decontamination solutions coming from the pickling process of the metallic components, with the aim to minimize the waste to be disposed, in an inert final product, and maximize the freely released material, that once it is decontaminated can be recycled. The process results in the production of a radioactive sludge, made mostly of iron-phosphate salts, which can be thermally treated to produce a ready-to-storage, homogenous and chemically resistant glass product. The process was first tested at laboratory scale and then in a pilot plant, installed at Politecnico di Milano. The main strengths of this innovative technology are: • Lower amount of fresh materials/chemicals requested for the waste treatment, resulting in lower costs associated with the process, also thanks to the continuous recycling of the pickling solution; • Lower volume and higher long-term stability of the nuclear waste for the final storage; • Facility with reduced footprint and transportable, designed to be installed in commercial containers.
- 3 October 2023
- Published by ASME International
Nuclear Waste Treatment: Vitrification of Iron-Phosphate Sludge
Within the framework of developing advanced processes for nuclear waste treatment, Ansaldo Nucleare is developing and testing an innovative technology to perform the conditioning of radioactive ferrous waste materials, classified as Low and Intermediate Level Waste (LILW), resulting from decommissioning activities of Nuclear Facilities. This technology is based on a patented process dedicated to the treatment of decontamination solutions coming from the pickling process of the metallic components, with the aim to minimize the waste to be disposed, in an inert final product, and maximize the freely released material, that once it is decontaminated can be recycled. The process results in the production of a radioactive sludge, made mostly of iron-phosphate salts, which can be thermally treated to produce a ready-to-storage, homogenous and chemically resistant glass product. The process was first tested at laboratory scale and then in a pilot plant, installed at Politecnico di Milano. The main strengths of this innovative technology are: • Lower amount of fresh materials/chemicals requested for the waste treatment, resulting in lower costs associated with the process, also thanks to the continuous recycling of the pickling solution; • Lower volume and higher long-term stability of the nuclear waste for the final storage; • Facility with reduced footprint and transportable, designed to be installed in commercial containers.
- Open Access
- 4 November 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (46) , 18400-18411
Insights into the Complexation Mechanism of a Promising Lipophilic PyTri Ligand for Actinide Partitioning from Spent Nuclear Fuel
The challenging issue of spent nuclear fuel (SNF) management is being tackled by developing advanced technologies that point to reduce environmental footprint, long-term radiotoxicity, volumes and residual heat of the final waste, and to increase the proliferation resistance. The advanced recycling strategy provides several promising processes for a safer reprocessing of SNF. Advanced hydrometallurgical processes can extract minor actinides directly from Plutonium and Uranium Reduction Extraction raffinate by using selective hydrophilic and lipophilic ligands. This research is focused on a recently developed N-heterocyclic selective lipophilic ligand for actinides separation to be exploited in advanced Selective ActiNide EXtraction (SANEX)-like processes: 2,6-bis(1-(2-ethylhexyl)-1H-1,2,3-triazol-4-yl)pyridine (PyTri-Ethyl-Hexyl-PTEH). The formation and stability of metal-ligand complexes have been investigated by different techniques. Preliminary studies carried out by electrospray ionization mass spectrometry (ESI-MS) analysis enabled to qualitatively explore the PTEH complexes with La(III) and Eu(III) ions as representatives of lanthanides. Time-resolved laser fluorescence spectroscopy (TRLFS) experiments have been carried out to determine the ligand stability constants with Cm(III) and Eu(III) and to better investigate the ligand complexes involved in the extraction process. The contribution of a 1:3 M/L complex, barely identified by ESI-MS analyses, was confirmed as the dominant species by TRLFS experiments. To shed light on ligand selectivity toward actinides over lanthanides, NMR investigations have been performed on PTEH complexes with Lu(III) and Am(III) ions, thereby showing significant differences in chemical shifts of the coordinating nitrogen atoms providing proof of a different bond nature between actinides and lanthanides. These scientific achievements encourage consideration of this PyTri ligand for a potential large-scale implementation.
- 4 November 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (46) , 18400-18411
Open AccessInsights into the Complexation Mechanism of a Promising Lipophilic PyTri Ligand for Actinide Partitioning from Spent Nuclear Fuel
The challenging issue of spent nuclear fuel (SNF) management is being tackled by developing advanced technologies that point to reduce environmental footprint, long-term radiotoxicity, volumes and residual heat of the final waste, and to increase the proliferation resistance. The advanced recycling strategy provides several promising processes for a safer reprocessing of SNF. Advanced hydrometallurgical processes can extract minor actinides directly from Plutonium and Uranium Reduction Extraction raffinate by using selective hydrophilic and lipophilic ligands. This research is focused on a recently developed N-heterocyclic selective lipophilic ligand for actinides separation to be exploited in advanced Selective ActiNide EXtraction (SANEX)-like processes: 2,6-bis(1-(2-ethylhexyl)-1H-1,2,3-triazol-4-yl)pyridine (PyTri-Ethyl-Hexyl-PTEH). The formation and stability of metal-ligand complexes have been investigated by different techniques. Preliminary studies carried out by electrospray ionization mass spectrometry (ESI-MS) analysis enabled to qualitatively explore the PTEH complexes with La(III) and Eu(III) ions as representatives of lanthanides. Time-resolved laser fluorescence spectroscopy (TRLFS) experiments have been carried out to determine the ligand stability constants with Cm(III) and Eu(III) and to better investigate the ligand complexes involved in the extraction process. The contribution of a 1:3 M/L complex, barely identified by ESI-MS analyses, was confirmed as the dominant species by TRLFS experiments. To shed light on ligand selectivity toward actinides over lanthanides, NMR investigations have been performed on PTEH complexes with Lu(III) and Am(III) ions, thereby showing significant differences in chemical shifts of the coordinating nitrogen atoms providing proof of a different bond nature between actinides and lanthanides. These scientific achievements encourage consideration of this PyTri ligand for a potential large-scale implementation.
- Open Access
- 11 October 2022
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 332 (5) , 1549-1555
A MOOC in Nuclear- and Radio-Chemistry: from the design to the feedback
Recently, the loss of expertise in the nuclear- and radio-chemistry (NRC) is becoming an issue of concern, because of few engaging curricula and career prospects.To counteract this trend, the Massive Open Online Course “Essential Radiochemistry for Society” has been developed with the intent of letting young students in scientific matters discover all the benefits of NRC to society and improving their awareness of these disciplines.The MOOC development process as well as the feedbacks collected in the first MOOC editions are analyzed by highlighting strong points and weakness of the followed strategy.
- 11 October 2022
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 332 (5) , 1549-1555
Open AccessA MOOC in Nuclear- and Radio-Chemistry: from the design to the feedback
Recently, the loss of expertise in the nuclear- and radio-chemistry (NRC) is becoming an issue of concern, because of few engaging curricula and career prospects.To counteract this trend, the Massive Open Online Course “Essential Radiochemistry for Society” has been developed with the intent of letting young students in scientific matters discover all the benefits of NRC to society and improving their awareness of these disciplines.The MOOC development process as well as the feedbacks collected in the first MOOC editions are analyzed by highlighting strong points and weakness of the followed strategy.
- Open Access
- 21 April 2022
- Published by Walter de Gruyter GmbH in Radiochimica Acta
- Vol. 110 (6-9) , 515-525
Selective actinide(III) separation using 2,6-bis[1-(propan-1-ol)-1,2,3-triazol-4-yl]pyridine (PyTri-Diol) in the innovative-SANEX process: laboratory scale counter current centrifugal contactor demonstration
An innovative-SANEX process for the selective separation of the trivalent actinides americium and curium from a simulated PUREX raffinate solution was successfully demonstrated on the laboratory scale using a 16-stage 1 cm annular centrifugal contactor setup. The solvent was composed of 0.2 mol L−1 N,N,N′,N′-tetra-n-octyl-diglycolamide (TODGA) and 5% v/v 1-octanol in a kerosene diluent. Zr(IV) and Pd(II) co-extraction was prevented using trans-1,2-diaminocyclohexane-N,N,N′,N′-tetraacetic acid (CDTA) as a masking agent in the feed. The actinide(III) selective back-extraction was achieved using 2,6-bis[1-(propan-1-ol)-1,2,3-triazol-4-yl]pyridine (PyTri-Diol) in 0.45 mol L−1 HNO3 as a CHON alternative to the sulfur-containing stripping agent used in a previous version of the innovative-SANEX process. The new process described in this paper showed excellent performance for the recovery of An(III). An An(III) product with a quasi-quantitative recovery of americium and curium (≥99.9%) and very good separation from fission and activation products was obtained (decontamination factors ≥4000). Only a slight contamination with Zr and Ru was observed. This test demonstrates the successful use of molecules containing only carbon, hydrogen, oxygen, and nitrogen atoms (so-called CHON molecules) for the selective separation of An(III) from a simulated PUREX raffinate solution. By avoiding sulfur- or phosphorous-containing molecules, the generation of secondary radioactive waste during process operation can be reduced drastically.
- 21 April 2022
- Published by Walter de Gruyter GmbH in Radiochimica Acta
- Vol. 110 (6-9) , 515-525
Open AccessSelective actinide(III) separation using 2,6-bis[1-(propan-1-ol)-1,2,3-triazol-4-yl]pyridine (PyTri-Diol) in the innovative-SANEX process: laboratory scale counter current centrifugal contactor demonstration
An innovative-SANEX process for the selective separation of the trivalent actinides americium and curium from a simulated PUREX raffinate solution was successfully demonstrated on the laboratory scale using a 16-stage 1 cm annular centrifugal contactor setup. The solvent was composed of 0.2 mol L−1 N,N,N′,N′-tetra-n-octyl-diglycolamide (TODGA) and 5% v/v 1-octanol in a kerosene diluent. Zr(IV) and Pd(II) co-extraction was prevented using trans-1,2-diaminocyclohexane-N,N,N′,N′-tetraacetic acid (CDTA) as a masking agent in the feed. The actinide(III) selective back-extraction was achieved using 2,6-bis[1-(propan-1-ol)-1,2,3-triazol-4-yl]pyridine (PyTri-Diol) in 0.45 mol L−1 HNO3 as a CHON alternative to the sulfur-containing stripping agent used in a previous version of the innovative-SANEX process. The new process described in this paper showed excellent performance for the recovery of An(III). An An(III) product with a quasi-quantitative recovery of americium and curium (≥99.9%) and very good separation from fission and activation products was obtained (decontamination factors ≥4000). Only a slight contamination with Zr and Ru was observed. This test demonstrates the successful use of molecules containing only carbon, hydrogen, oxygen, and nitrogen atoms (so-called CHON molecules) for the selective separation of An(III) from a simulated PUREX raffinate solution. By avoiding sulfur- or phosphorous-containing molecules, the generation of secondary radioactive waste during process operation can be reduced drastically.