Non-Contact Degradation Evaluation for IGBT Modules Using Eddy Current Pulsed Thermography Approach
Open Access
Abstract
In this paper, a non-contact degradation evaluation method for insulated gate bipolar transistor (IGBT) modules is proposed based on eddy current pulsed thermography approach. In non-contact heat excitation procedures, a high-power induction heater is introduced to generate heat excitation in IGBT modules. The thermographs of the whole temperature mapping are recorded non-invasively by an IR camera. As a result, the joint degradation of IGBT modules can be evaluated by the transient thermal response curves derived from the recorded thermographs. Firstly, the non-destructive evaluation principle of the eddy current pulsed thermography (ECPT) system for an IGBT module with a heat sink is introduced. A 3D simulation module is built with physical parameters in ANSYS simulations, and then thermal propagation behavior considering the degradation impact is investigated. An experimental ECPT system is set up to verify the effectiveness of the proposed method. The experimental results show that the delay time to peak temperature can be extracted and treated as an effective indicative feature of joint degradation.Keywords
This publication has 30 references indexed in Scilit:
- Evolution of the HVDC Link Connecting Offshore Wind Farms to Onshore Power SystemsEnergies, 2020
- A Modulated Model Predictive Current Controller for Interior Permanent-Magnet Synchronous MotorsEnergies, 2019
- Modeling of Short-Circuit-Related Thermal Stress in Aged IGBT ModulesIEEE Transactions on Industry Applications, 2017
- Complete Loss and Thermal Model of Power Semiconductors Including Device Rating InformationIEEE Transactions on Power Electronics, 2014
- Physics-of-Failure, Condition Monitoring, and Prognostics of Insulated Gate Bipolar Transistor Modules: A ReviewIEEE Transactions on Power Electronics, 2014
- In Situ Diagnostics and Prognostics of Solder Fatigue in IGBT Modules for Electric Vehicle DrivesIEEE Transactions on Power Electronics, 2014
- In Situ Diagnostics and Prognostics of Wire Bonding Faults in IGBT Modules for Electric Vehicle DrivesIEEE Transactions on Power Electronics, 2013
- Limiting Factors of the Safe Operating Area for Power DevicesIEEE Transactions on Electron Devices, 2012
- Void-induced thermal impedance in power semiconductor modules: Some transient temperature effectsIEEE Transactions on Industry Applications, 2003
- Selected failure mechanisms of modern power modulesMicroelectronics Reliability, 2002