Thermomechanical response of a viscoelastic Ni-Ti – Shape Memory Alloy composite beam
Open Access
- 16 December 2019
- journal article
- research article
- Published by Universidad Santo Tomas in ITECKNE
- Vol. 16 (2) , 32-39
Abstract
This investigation is concerned with the mechanical behavior of Shape Memory Alloy Hybrid Composite Beams (SMAHC), that consist of a circular bar of NiTi alloy incorporated in a 500 mm long cylindrical pipe of polypropylene (PP), with external diameter 50 mm and nominal wall thickness 7 mm, wound with a nylon/epoxy layer. The Ni-Ti alloy was characterized using: scanning electron microscopy (SEM); X-ray diffraction (XRD) and Differential thermal analysis (DSC). The nominal chemical composition of the alloy is 50.05 %Ni / 49.95%Ti, and the softer martensite is the predominant phase at room temperature. The approximate martensite (M) to Austenitic (A) phase transformation temperatures were Mstart = 32°C, Mfinal = 46°C, Astart = 38 °C and Afinal = 60°C. For temperature TAfinal it is fully converted in the Austenitic phase; and its elasticity modulus increases by a factor up to three times. This significant change in stiffness of Ni-Ti, without changing its mass, has motivated the application of such alloy in machine vibration control. The SMAHC beams were subjected to static three-point bending tests, in the elastic regime. Experimental results showed that, in average, at 21°C, the PP pipes effective flexural elastic modulus increased 112%, from 757 MPa to 1609 MPa, when the Ni-Ti bar and the external layer of nylon/epoxy were incorporated to the PP pipe, creating a smart beam. These last results indicate that the SMAHC beam can work as an adaptative structure.Keywords
This publication has 13 references indexed in Scilit:
- Effect of NiTi content and test temperature on mechanical behaviors of NiTi–PU compositesInternational Journal of Lightweight Materials and Manufacture, 2018
- Diseño de un sistema de control avanzado para regular la velocidad de una turbina de vapor acoplada a un generador DCITECKNE, 2018
- Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials2017
- Damping sources interactions in impact of viscoelastic composite plates with damping treated SMA wires, using a hyperbolic plate theoryApplied Mathematical Modelling, 2017
- SMA Constitutive Modeling and Analysis of Plates and Composite Laminates2015
- Machinability and surface integrity of Nitinol shape memory alloyCIRP Annals, 2013
- Physical metallurgy of Ti–Ni-based shape memory alloysProgress in Materials Science, 2005
- Nitinol; A Metal-Alloy with Memory2005
- Microstructure and martensitic transformation behavior of porous NiTi shape memory alloy prepared by hot isostatic pressing processingMaterials Science and Engineering: A, 2004
- Smart Structures: Analysis and DesignMeasurement Science and Technology, 2002