Quench Considerations and Protection Scheme of a High Field HTS Dipole Insert Coil
- 19 December 2012
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 23 (3) , 4600104
Abstract
The large scale particle accelerators of the future in the 20 T regime are enabled by high temperature superconducting magnets. The dipole magnets needed in new high-field accelerators can be constructed with an YBCO insert and a Nb3Sn outsert. Such a configuration makes the quench analysis and magnet protection challenging because the quench behavior in both of these coils is different and there is very strong inductive coupling between the coils. The Nb3Sn coil is characterized by high energy and current and relatively fast quench propagation velocity. However, quench propagates slowly in YBCO coils because of typically wide spread large temperature margin. Currently, in the EuCARD project, a European collaboration is targeting to construct a small-scale high field YBCO-Nb3Sn hybrid magnet. In this paper, we scrutinize quench in the YBCO insert. We utilized an approach based on a solution of the heat diffusion equation with the finite element method. Additionally, we present a protection scheme for the coil.Keywords
This publication has 19 references indexed in Scilit:
- Quench Propagation in YBCO Pancake: Experimental and Computational ResultsIEEE Transactions on Applied Superconductivity, 2013
- Development of the EuCARD $\hbox{Nb}_{3}\hbox{Sn}$ Dipole Magnet FRESCA2IEEE Transactions on Applied Superconductivity, 2013
- HTS Dipole Insert DevelopmentsIEEE Transactions on Applied Superconductivity, 2013
- Gmsh: A 3‐D finite element mesh generator with built‐in pre‐ and post‐processing facilitiesInternational Journal for Numerical Methods in Engineering, 2009
- Detecting and describing the inhomogeneity of critical current in practical long HTS tapes using contact-free methodCryogenics, 2007
- Experimental Techniques for Low-Temperature Measurements2006
- Stability considerations of multifilamentary MgB2tapeSuperconductor Science and Technology, 2006
- A numerical model for stability considerations in HTS magnetsSuperconductor Science and Technology, 2000
- 1.9 K test facility for the reception of the superconducting cables for the LHCIEEE Transactions on Applied Superconductivity, 1999
- A Numerical Model for the Simulation of Quench in the ITER MagnetsJournal of Computational Physics, 1996