Abstract
Laminated elastomeric bridge bearings are commonly used in areas with low-to-moderate seismicity, although the applications are typically intended for service-level considerations such as thermal movements of the bridge superstructure. These components provide a potential source of displacement capacity frequently neglected in seismic design. An experimental program was carried out to evaluate the behavioral characteristics and performance of steel-reinforced, laminated elastomeric bearings, which had not been designed for seismic demands, as the primary quasi-isolation components for seismic events by permitting slip at the interface of the bearing and substructure. The rubber at the top of the bearing is vulcanized to a steel plate, which is bolted to the test frame to simulate a connection to the superstructure. At the base of the bearing, the elastomer directly contacts concrete representing the substructure, with no restraint of horizontal motion other than friction. The elastomeric bearings ...

This publication has 15 references indexed in Scilit: