Numerical Investigation into 18650 Li-Ion Battery Temperature Control Applying Immersion Cooling with FC-40 Dielectric Fluid
Open Access
Abstract
Nowadays, immersion cooling-based battery thermal management systems have demonstrated their effectiveness in controlling the temperature of lithium-ion batteries. While previous scientific research has primarily concentrated on traditional dielectric fluids such as mineral oil, the current research investigates the effectiveness of the dielectric fluid FC-40. A three-dimensional Computational Fluid Dynamics model of an eight-cell 18650 battery system was constructed using ANSYS Fluent 19.2 to examine the effect of cooling fluids (air, mineral oil, and FC-40), velocity of flow (0.01 m/s to 0.15 m/s), discharge rate (1C to 5C), and inlet/outlet size (2.5 mm to 3.5 mm) on thermal efficiency as well as pressure drop. The findings indicate that employing FC-40 as the dielectric fluid significantly reduces the peak cell temperature, with an absolute decrease of 2.80 °C compared to mineral oil and 15.10 °C compared to air. Furthermore, FC-40 achieves the highest uniformity with minimal hotspot. On the other hand, as the fluid velocity increases, the maximum temperature of the battery drops, reaching a minimum of 26 °C at a velocity of 0.15 m/s. Otherwise, at lower flow velocities, the pressure drop remains minimal, thereby reducing the pumping power consumption. Additionally, increasing the inlet and outlet diameter of the fluid directly improves cooling uniformity. Consequently, the temperature dropped by up to 4.3%. Finally, the findings demonstrate that elevated discharge rates contribute to increased heat dissipation but adversely affect the efficiency of the thermal management system. This study provides critical knowledge for the enhancement of battery thermal management systems based on immersion cooling using FC-40 as a dielectric.Keywords
This publication has 29 references indexed in Scilit:
- Dynamic-static composite immersion cooling for improving thermal equalization behavior in lithium-ion battery packsEnergy, 2025
- Single-phase static immersion-cooled battery thermal management system with finned heat pipesApplied Thermal Engineering, 2024
- Theoretical and experimental investigations on liquid immersion cooling battery packs for electric vehicles based on analysis of battery heat generation characteristicsEnergy Conversion and Management, 2024
- Liquid immersion thermal management of lithium-ion batteries for electric vehicles: An experimental studyJournal of Energy Storage, 2023
- Numerical study on heat dissipation performance of a lithium-ion battery module based on immersion coolingJournal of Energy Storage, 2023
- Heat transfer characteristics and influencing factors of immersion coupled direct cooling for battery thermal managementJournal of Energy Storage, 2023
- Experimental investigation and comparative analysis of immersion cooling of lithium-ion batteries using mineral and therminol oilApplied Thermal Engineering, 2023
- Battery thermal management systems (BTMs) based on phase change material (PCM): A comprehensive reviewChemical Engineering Journal, 2022
- A novel dielectric fluid immersion cooling technology for Li-ion battery thermal managementEnergy Conversion and Management, 2021
- Effects of the different air cooling strategies on cooling performance of a lithium-ion battery module with baffleApplied Thermal Engineering, 2018