Load Measurement and Control of Auxiliary Bridge Supports During Passage of Oversized Vehicles
Open Access
- 29 October 2026
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 16 (21) , 10704
Abstract
Actual live loads on bridges can be categorized into ordinary loads and loads exceeding standard limits induced by abnormal transport. A bridge structure subjected to a heavy load may behave differently than under a light load. Selected analyses performed as part of an assessment regarding the presence of a vehicle weighing 620 tons on the bridge are presented in the paper. The decision on the structural safety for the passage of such a vehicle is made after a structural check, taking into account the current technical condition of the structure. The bridge discussed here was strengthened to achieve a load-bearing capacity significantly higher than its original rating. Two additional steel frame supports were installed beneath the existing span, which originally functioned as a simply supported beam. These supports are engaged only when the bridge is subjected to exceptionally heavy, overweight loads. Consequently, the support system of the bridge span is variable, depending on the loads applied and the structural deflections. It has been found that the results of measurements taken during the previous overweight transport are very useful for proper structural modeling. The main aim of this work is to present a methodology for determining or modeling the structural behavior of nontypical bridges under very exceptional loads.Keywords
This publication has 15 references indexed in Scilit:
- Safety Evaluation of Bridge under Moving Abnormal Indivisible Load Based on Fusing Bridge Inspection Data and Load Test DataStructural Durability & Health Monitoring, 2025
- Computer vision-based weight identification and stability evaluation of exceptional transport vehiclesEngineering Structures, 2023
- Study on impact factors of small- and medium-span bridges under the special-purpose vehicle loadStructures, 2022
- Global Assessment of Bridge Passage in Relation to Oversized and Excessive Transport: Case Study Intended for SlovakiaApplied Sciences, 2022
- Permit checking of overloaded customized transport vehicle based on serviceability limit state reliability of concrete bridgesAdvances in Structural Engineering, 2020
- OVERSIZE CARGO TRANSPORT IN ROAD TRANSPORT – PROBLEMS AND ISSUESScientific Journal of Silesian University of Technology. Series Transport, 2020
- HEIGHT AND WIDTH PARAMETERS FOR ENSURING PASSAGE OF EXCESSIVE LOADS ON ROADSActa Polytechnica, 2017
- Przebudowa mostu z uwagi na sporadyczne przejazdy nienormatywneArchiwum Instytutu Inżynierii Lądowej, 2017
- Using vehicle simulations to understand strategies for accommodating oversize, overweight vehicles at roundaboutsTransportation Research Part A: Policy and Practice, 2016
- Validation of numerical models of concrete box bridges based on load test resultsArchives of Civil and Mechanical Engineering, 2015