Microstructural refinement and tensile improvement of as-cast A380 alloy with 0.5 wt.% nano-SiO 2 particles
- 18 December 2025
- journal article
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (1)
Abstract
The effects of adding 0.5 wt.% nano-SiO₂ particles on the evolution of microstructure and tensile behavior of as-cast A380 aluminum alloy were studied. The optical micrographs showed a remarkable reduction of grain size from ~650 μm to ~350 μm (~46%), and SEM images indicated that the coarse β-Fe needles were transformed to compact α-Fe phases, which is due to the nucleating and pinning effects of SiO₂ nanoparticles. The length and aspect ratio of Si also decreased from ~18 μm and 7 to ~4 μm and 3. Tensile testing revealed an increase in strength of around 32% (from 190 MPa to 250 MPa) and a 100% increase in elongation (from 3% to 6%), along with the transition of brittle fracture to ductile fracture. The vortex method led to uniform SiO₂ dispersion, minimizing agglomeration and supporting the potential of A380 alloy for highperformance applications in the automotive and aviation industriesKeywords
Funding Information
- Institute of Science and High Technology and Environmental Sciences, Graduate University of Advanced Technology
This publication has 24 references indexed in Scilit:
- Evaluation of Tensile Properties and Formability of Al 6061 Alloy Processed by Various Semi-solid TechniquesJournal of Materials Engineering and Performance, 2024
- Review of improvement of machinability and surface integrity in machining on aluminum alloysThe International Journal of Advanced Manufacturing Technology, 2023
- Grain refinement and property improvements of Al–Zn–Mg–Cu alloy by heterogeneous particle addition during wire and arc additive manufacturingJournal of Materials Research and Technology, 2022
- Role of homogeneous distribution of SiC reinforcement on the characteristics of stir casted Al–SiC compositesJournal of Alloys and Compounds, 2021
- Synthesis and Characterization of Aa2024-Sio2 Nanocomposites Through the Vortex MethodInternational Journal of Metalcasting, 2021
- A Review on the Criteria of Hot Tearing Susceptibility of Aluminum Cast AlloysInternational Journal of Metalcasting, 2021
- High-performance Al-1.5 wt% Si-Al2O3 composite by vortex-free high-speed stir castingJournal of Manufacturing Processes, 2020
- Influence of SiO2 nanoparticles on the microstructure and mechanical properties of Al matrix nanocomposites fabricated by spark plasma sinteringComposites Part B: Engineering, 2018
- Development of an aluminum/amorphous nano-SiO2 composite using powder metallurgy and hot extrusion processesCeramics International, 2017
- Grain refining mechanism in the Al/Al–Ti–B systemActa Materialia, 2015