Mostafa Karamouz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Mostafa Karamouz has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Alipour
University of Tabriz
14 shared publications Masoud Emamy
School of Metallurgy and Materials Engineering, University of Tehran, Tehran 1749637181, Iran
13 shared publicationsMortaza Azarbarmas
12 shared publications- Seyed Mohammad Jesmani
Department of Mechanical Engineering, Technical and Vocational University (TVU), Tehran, Iran
6 shared publications Jafar Rasizadeh
5 shared publicationsJafar Rassizadehghani
5 shared publications
Latest Publications
- 18 December 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (1)
Microstructural refinement and tensile improvement of as-cast A380 alloy with 0.5 wt.% nano-SiO 2 particles
The effects of adding 0.5 wt.% nano-SiO₂ particles on the evolution of microstructure and tensile behavior of as-cast A380 aluminum alloy were studied. The optical micrographs showed a remarkable reduction of grain size from ~650 μm to ~350 μm (~46%), and SEM images indicated that the coarse β-Fe needles were transformed to compact α-Fe phases, which is due to the nucleating and pinning effects of SiO₂ nanoparticles. The length and aspect ratio of Si also decreased from ~18 μm and 7 to ~4 μm and 3. Tensile testing revealed an increase in strength of around 32% (from 190 MPa to 250 MPa) and a 100% increase in elongation (from 3% to 6%), along with the transition of brittle fracture to ductile fracture. The vortex method led to uniform SiO₂ dispersion, minimizing agglomeration and supporting the potential of A380 alloy for highperformance applications in the automotive and aviation industries
- 18 December 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 8 (1)
Microstructural refinement and tensile improvement of as-cast A380 alloy with 0.5 wt.% nano-SiO 2 particles
The effects of adding 0.5 wt.% nano-SiO₂ particles on the evolution of microstructure and tensile behavior of as-cast A380 aluminum alloy were studied. The optical micrographs showed a remarkable reduction of grain size from ~650 μm to ~350 μm (~46%), and SEM images indicated that the coarse β-Fe needles were transformed to compact α-Fe phases, which is due to the nucleating and pinning effects of SiO₂ nanoparticles. The length and aspect ratio of Si also decreased from ~18 μm and 7 to ~4 μm and 3. Tensile testing revealed an increase in strength of around 32% (from 190 MPa to 250 MPa) and a 100% increase in elongation (from 3% to 6%), along with the transition of brittle fracture to ductile fracture. The vortex method led to uniform SiO₂ dispersion, minimizing agglomeration and supporting the potential of A380 alloy for highperformance applications in the automotive and aviation industries
- 23 July 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (3) , 035002
Energy-saving production of CaO- Al2O3-SiO2 glass-ceramic using feldspar, calcium carbonate, and calcium fluoride
In this study, the production of CaO-Al2O3-SiO2 glass-ceramics using 40 wt% calcium carbonate, 60 wt% feldspar, and 0–3 wt% CaF2 as a nucleating agent was investigated. The samples were melted at 1360 °C, cooled to 500 °C, and crystallized at 950 °C. FTIR analysis showed that CaF2 depolymerizes the glass network, increasing the NBO/T ratio from 0.708 with no CaF2 to 0.875 with 2 wt% CaF2. XRD revealed the formation of albite and wollastonite in the sample containing no CaF2, with Ca4Al2O6F2 forming in the samples containing CaF2, increasing crystallinity from 81% (no CaF2) to 95% (2 wt% CaF2). SEM and EDX confirmed a transition to a fine-grained structure in the sample containing 2 wt% CaF2. The addition of 2 wt% CaF2 exhibited optimal properties, i.e., density (2.72 g cm−3), Vickers hardness (486 HV), and low water absorption (0.39%). However, 3 wt% CaF2 reduced properties due to grain growth and porosity.
- 23 July 2025
- Published by IOP Publishing in Engineering Research Express
- Vol. 7 (3) , 035002
Energy-saving production of CaO- Al2O3-SiO2 glass-ceramic using feldspar, calcium carbonate, and calcium fluoride
In this study, the production of CaO-Al2O3-SiO2 glass-ceramics using 40 wt% calcium carbonate, 60 wt% feldspar, and 0–3 wt% CaF2 as a nucleating agent was investigated. The samples were melted at 1360 °C, cooled to 500 °C, and crystallized at 950 °C. FTIR analysis showed that CaF2 depolymerizes the glass network, increasing the NBO/T ratio from 0.708 with no CaF2 to 0.875 with 2 wt% CaF2. XRD revealed the formation of albite and wollastonite in the sample containing no CaF2, with Ca4Al2O6F2 forming in the samples containing CaF2, increasing crystallinity from 81% (no CaF2) to 95% (2 wt% CaF2). SEM and EDX confirmed a transition to a fine-grained structure in the sample containing 2 wt% CaF2. The addition of 2 wt% CaF2 exhibited optimal properties, i.e., density (2.72 g cm−3), Vickers hardness (486 HV), and low water absorption (0.39%). However, 3 wt% CaF2 reduced properties due to grain growth and porosity.
- 15 July 2025
- Published by Springer Nature in JOM
- p. 1-12
A Comparative Study on the Effect of Potassium on Grain Refinement and Wear Performance of A319 Aluminum Alloy
- 15 July 2025
- Published by Springer Nature in JOM
- p. 1-12
A Comparative Study on the Effect of Potassium on Grain Refinement and Wear Performance of A319 Aluminum Alloy
- 17 February 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (18) , 20400-20406
Role of Potassium in Enhancement of Microstructure and Tensile Properties of A319 Alloy
- 17 February 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (18) , 20400-20406
Role of Potassium in Enhancement of Microstructure and Tensile Properties of A319 Alloy
- 7 January 2025
- Published by SAGE Publications in Materials Science and Technology
- Vol. 42 (6) , 638-648
Effect of different modified semisolid processes on hardness and wear behavior of Al-0.9 Mg-0.7 Si-0.2 Zn alloy
This research aims to study the effect of three different semi-solid processes on the microstructure, hardness, and wear behavior of Al-0.9 Mg-0.7 Si-0.2 Zn alloy. Conventional strain induced melt activation (SIMA), SIMA plus annealing, and a new two-stage SIMA (TSSIMA) were conducted and their effects were evaluated. The results showed that TSSIMA led to the most appropriate microstructure owing to grain refinement, the removal of the eutectic microstructure, uniform distribution of the precipitates, and thin grain boundaries. These, in turn led to the highest hardness and least wear weight loss in this sample. Moreover, it was found that the softening effect of annealing in process 2 (SIMA + annealing) counteracted the positive effect of Conventional SIMA process.
- 7 January 2025
- Published by SAGE Publications in Materials Science and Technology
- Vol. 42 (6) , 638-648
Effect of different modified semisolid processes on hardness and wear behavior of Al-0.9 Mg-0.7 Si-0.2 Zn alloy
This research aims to study the effect of three different semi-solid processes on the microstructure, hardness, and wear behavior of Al-0.9 Mg-0.7 Si-0.2 Zn alloy. Conventional strain induced melt activation (SIMA), SIMA plus annealing, and a new two-stage SIMA (TSSIMA) were conducted and their effects were evaluated. The results showed that TSSIMA led to the most appropriate microstructure owing to grain refinement, the removal of the eutectic microstructure, uniform distribution of the precipitates, and thin grain boundaries. These, in turn led to the highest hardness and least wear weight loss in this sample. Moreover, it was found that the softening effect of annealing in process 2 (SIMA + annealing) counteracted the positive effect of Conventional SIMA process.
- 9 September 2024
- Published by Springer Nature in JOM
- Vol. 76 (12) , 7002-7010
Hybrid Modification of Microstructure and Tensile Properties of A319 Alloy by Heat Treatment and Be Addition
- 9 September 2024
- Published by Springer Nature in JOM
- Vol. 76 (12) , 7002-7010
Hybrid Modification of Microstructure and Tensile Properties of A319 Alloy by Heat Treatment and Be Addition
- 3 September 2024
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (12) , 11020-11028
Influence of Be Content and T4 Temper Heat Treatment on Hardness and Wear Behavior of Al-Alloy A319
- 3 September 2024
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (12) , 11020-11028
Influence of Be Content and T4 Temper Heat Treatment on Hardness and Wear Behavior of Al-Alloy A319
- 27 June 2024
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (9) , 7955-7964
Modification of Microstructure, Hardness, and Wear Behavior of Al-8.5Si-2.3Cu Alloy by Various Melt Shearing Speeds
- 27 June 2024
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (9) , 7955-7964
Modification of Microstructure, Hardness, and Wear Behavior of Al-8.5Si-2.3Cu Alloy by Various Melt Shearing Speeds
- 26 April 2024
- Published by Springer Nature in Transactions of the Indian Institute of Metals
- Vol. 77 (9) , 2393-2402
Influence of Various Melt Shearing Speeds on Macrostructure, Microstructure, and Tensile Properties of A380 Aluminum Alloy
- 26 April 2024
- Published by Springer Nature in Transactions of the Indian Institute of Metals
- Vol. 77 (9) , 2393-2402
Influence of Various Melt Shearing Speeds on Macrostructure, Microstructure, and Tensile Properties of A380 Aluminum Alloy
- 5 April 2024
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (5) , 4328-4335
Evaluation of Tensile Properties and Formability of Al 6061 Alloy Processed by Various Semi-solid Techniques
- 5 April 2024
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (5) , 4328-4335
Evaluation of Tensile Properties and Formability of Al 6061 Alloy Processed by Various Semi-solid Techniques