Effects of Annealing on Characteristics of Cu2ZnSnSe4/CH3NH3PbI3/ZnS/IZO Nanostructures for Enhanced Photovoltaic Solar Cells
Open Access
- 13 March 2020
- journal article
- research article
- Published by MDPI AG in Nanomaterials
- Vol. 10 (3) , 521
Abstract
This paper presents new photovoltaic solar cells with Cu2ZnSnSe4/CH3NH3PbI3(MAPbI3)/ZnS/IZO/Ag nanostructures on bi-layer Mo/FTO (fluorine-doped tin oxide) glasssubstrates. The hole-transporting layer, active absorber layer, electron-transporting layer, transparent-conductive oxide layer, and top electrode-metal contact layer, were made of Cu2ZnSnSe4, MAPbI3 perovskite, zincsulfide, indium-doped zinc oxide, and silver, respectively. The active absorber MAPbI3 perovskite film was deposited on Cu2ZnSnSe4 hole-transporting layer that has been annealed at different temperatures. TheseCu2ZnSnSe4 filmsexhibitedthe morphology with increased crystal grain sizesand reduced pinholes, following the increased annealing temperature. When the perovskitefilm thickness was designed at 700 nm, the Cu2ZnSnSe4 hole-transporting layer was 160 nm, and the IZO (indium-zinc oxide) at 100 nm, and annealed at 650 °C, the experimental results showed significant improvements in the solar cell characteristics. The open-circuit voltage was increased to 1.1 V, the short-circuit current was improved to 20.8 mA/cm2, and the device fill factor was elevated to 76.3%. In addition, the device power-conversion efficiency has been improved to 17.4%. The output power Pmax was as good as 1.74 mW and the device series-resistance was 17.1 Ω.Keywords
This publication has 38 references indexed in Scilit:
- Investigation of Well-Defined Pinholes in TiO2 Electron Selective Layers Used in Planar Heterojunction Perovskite Solar CellsNanomaterials, 2020
- An Emerging Visible-Light Organic–Inorganic Hybrid Perovskite for Photocatalytic ApplicationsNanomaterials, 2020
- Facile Synthesis of Methylammonium Lead Iodide Perovskite with Controllable Morphologies with Enhanced Luminescence PerformanceNanomaterials, 2019
- Optimizing the Interface between Hole Transporting Material and Nanocomposite for Highly Efficient Perovskite Solar CellsNanomaterials, 2019
- High-efficiency crystalline silicon solar cells: status and perspectivesEnergy & Environmental Science, 2016
- Conjugated polyelectrolyte hole transport layer for inverted-type perovskite solar cellsNature Communications, 2015
- Compositional engineering of perovskite materials for high-performance solar cellsNature, 2015
- Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite AbsorberScience, 2013
- CH3NH3PbI3 Perovskite/Fullerene Planar‐Heterojunction Hybrid Solar CellsAdvanced Materials, 2013
- Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%Scientific Reports, 2012