YSYu.M. Shernyakov

Yu.M. Shernyakov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yu.M. Shernyakov has a total of 111 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Power Limiting Factors in Grazing Stripe Superluminescent Diodes Based on InGaAs/GaAs/AlGaAs Quantum Dots and Well-Dots

    by Grigoriy O. Kornyshov, Nikita Yu. Gordeev, Yuriy M. Shernyakov, Artem A. Beckman, Alexey S. Payusov, Sergey A. Mintairov, Nikolay A. Kalyuzhnyy, Vladimir G. Dubrovskii, Mikhail V. Maximov


  • Excitatory and inhibitory optical neuron implementation using lasing wavelength switching in edge-coupled InAs/InGaAs/GaAs quantum dot lasers

    by Mikhail Maximov, Yuri Shernyakov, Grigoriy Kornyshov, Artem Beckman, Anton Kharchenko, Nikita Gordeev, Olga Simchuk, Vladimir Dubrovskii, Alexandr Vorobyev, Fedor Zubov

    We report on lasing wavelength switching effects in InAs/InGaAs/GaAs quantum dot (QD) edge-emitting lasers activated by electrical and additional optical pumping provided by another edge-coupled QD laser. The lasers under study operate either on the ground state (GS) or on the excited state (ES). Optical pumping is provided by either GS (1260 nm) or ES (1180 nm) emission. Thus, we have evaluated four combinations of lasing modes and pumping wavelengths. Pumping of QD laser operating on ES transition with light from the GS transition results in suppression of ES lasing, with only GS emission detected. In the other three cases, optical pumping does not change the lasing mode. The switching effects resemble the behavior of biological neurons and can be useful for designing neuromorphic photonic integrated circuits.


  • Material gain and two-state lasing in quantum well-dot lasers

    by Grigoriy Kornyshov, Yuriy Shernyakov, Artem Beckman, Anton Kharchenko, Alexey Payusov, Sergey Mintairov, Nikolay Kalyuzhnyy, Olga Simchuk, Julia Tkach, Vladimir Dubrovskii, et al.

    We report on modal and material gains as well as two-state lasing in lasers based on quantum well-dots (QWDs)–quantum heterostructures of mixed dimensionality (0D/2D). A high ground-state (GS) modal gain of 100 cm−1 is revealed in the device based on a single QWD layer. The upper limit of the GS material gain is estimated as 2.2 × 104 cm−1. In narrow-ridge 200 μm long lasers, pure GS lasing occurs up to a pumping current density that exceeds the threshold value by 17.5 times. A decrease in the optical confinement factor results in lasing via an excited state (ES) at a high pumping current. In the current range corresponding to the GS lasing, the devices operate in the transverse fundamental optical mode, whereas above the ES lasing threshold, they operate in the second order mode. In narrow-ridge lasers, the ES lasing is observed in longer cavities and at lower threshold current densities than in broad-area lasers.


  • Open Access

    Gain characteristics of In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattice active regions for vertical-cavity surface-emitting lasers

    by P.E. Kopytov, Vladislav V. Andryushkin, Evgeniy V. Pirogov, Maxim S. Sobolev, Andrey V. Babichev, Y.M. Shernyakov, M.V. Maximov, A.V. Lyutetskiy, N.A. Pikhtin, Leonid Ya. Karachinsky, et al.

    The results of investigation of the gain properties of 1300 nm vertical-cavity surface-emitting lasers active regions based on In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattices and threshold characteristics comparison of superlattices and highly lattice mismatched In0,74Al0,16Ga0,10As quantum wells are presented. The heterostructure of injection lasers with an In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattice was grown by molecular beam epitaxy. Mesa structure of injection lasers was obtained by selective liquid etching followed by the application of ohmic contacts. The formation of injection lasers with various cavity lengths is performed using the method of manually cleaving mirrors. The output characteristics were measured in a pulsed mode using a large area calibrated germanium photodiode. Spectral characteristics were measured using a spectrophotometer based on monochromator. The achieved threshold characteristics (modal gain about 40 cm–1, transparency current density about 650 A/cm2, internal optical losses about 8 cm–1) of injection lasers based on In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattices with low lattice mismatch InGaAs layers are comparable to previously presented lasers based on active regions with strongly strained In0,74Al0,16Ga0,10As quantum wells. The characteristic temperatures T0 and T1 were 60 K and 87 K for injection lasers with a cavity length of 1 mm. An increase in the frequency of small-signal modulation of vertical-cavity surface-emitting lasers and their temperature stability is associated with the use of highly strained In0.60Ga0.40As/In0.53Al0.20Ga0.27As superlattices. The proposed active regions based on InGaAs-InP superlattices have the potential to be used in the development of vertical-cavity surface-emitting lasers in the 1300 nm spectral range. The findings of this work can be applied in the realization of experimental species and optimization of modulation parameters for vertical-cavity lasers operating in the 1300 nm wavelength range.

  • Hybrid multilevel-multiwavelength signaling scheme for optical data transmission

    by Mikhail V Maximov, Yuri M Shernyakov, Nikita Yu Gordeev, Vladimir G Dubrovskii, Alexey M Nadtochiy, Alexey E Zhukov

    We suggest an idea of data encoding scheme based on the switching from the ground state (GS) to excited state (ES) lasing in quantum dot (QD) lasers with increase in injection current. The groups of two bits are assigned to lasing spectra that comprise either one or both GS and/or ES lasing lines depending on injection current. We expect that the proposed encoding scheme can potentially combine some advantages of multilevel signaling and wavelength division multiplexing.


  • Tilted cavity concept for the high-power wavelength stabilized diode lasers

    by L. Ya. Karachinsky, I. I. Novikov, G. Fiol, M. Kuntz, Yu. M. Shernyakov, N. Yu. Gordeev, M. V. Maximov, M. B. Lifshits, T. Kettler, K. Posilovic, et al.

    We discuss wavelength stabilized all-epitaxial Tilted Cavity Lasers (TCLs). Optical cavity of a TCL favors propagation of only one tilted optical mode ensuring wavelength-selective operation. The possibility of full control of the thermal shift of the lasing wavelength d λ/dT in TCL including positive, zero or negative shift, is proved theoretically. Broad-area (100 μm) 970-nm-range devices have been fabricated showing a high temperature stability of the lasing wavelength (0.13 nm/K), a high power operation (> 7 W in pulsed mode and > 1.5 W in continuous wave (cw) mode), and a narrow vertical far-field beam divergence (FWHM ~ 20°). Single transverse mode edge-emitting 4 μm-wide-ridge TCLs demonstrated high-power spatial and spectral single mode cw operation with a longitudinal side mode suppression ratio (SMSR) up to 41.3 dB at 93 mW output power. Such a result is similar to the best values achieved for DFB lasers in the same spectral range, while no etching and overgrowth is used in present case.

  • Edge and surface-emitting tilted cavity lasers (Invited Paper)

    by N. N. Ledentsov, V. A. Shchukin, A. R. Kovsh, S. S. Mikhrin, I. L. Krestnikov, A. V. Kozhukhov, N. Yu. Gordeev, L. Ya. Karachinsky, M. V. Maximov, I. I. Novikov, et al.

    The Tilted Cavity (TC) concept has been proposed to combine advantages of edge- and surface-emitting lasers (detectors, amplifiers, switches, etc.). Tilted Cavity Lasers (TCL) enable wavelength-stabilized high-power edge and surface emitters (TCSEL) in low-cost single-epitaxial step design. The concept covers numerous applications including mode-locked TCL for light speed control, dispersion and linewidth engineering, GaN-based light-emitters, electrooptic wavelength tunable devices, and other applications. Presently, wavelength stabilized TC operation is realized between -200°C and 70°C in broad TCL diodes with cleaved facets based on quantum dots (QDs). The spectral width is below 0.6 nm in broad area 100 μm-wide-stipe devices. The far fields are: 4° (lateral) and 42° (vertical). Wavelength-stabilized 1.16 μm and 1.27 μm edge-emitting QD TCL lasers are demonstrated. Quantum well TCL demonstrate high-temperature operation up to 240°C with a low threshold, high temperature stability and improved wavelength stability. The tilted cavity approach can also be applied in wavelength-optimized photodetectors, switches, semiconductor optical amplifiers, including multi-channel devices, in optical fibers, in photodetectors, in light-emitting diodes and in many other applications. Moreover, microelectronic devices based on similar tilted angle resonance phenomena in quantum wells and superlattices can be realized in electron- or hole-wavefunction-engineered structures, thus, merging the fields of nanophotonics and nanoelectronics. The tilted cavity concept can be further complimented by lateral patterning and (or) processing of three-dimensional photonic crystal structures further extending horizons of modern optoelectronics.


  • Open Access

    Direct modulation and mode locking of 1.3 μm quantum dot lasers

    by M Kuntz, G Fiol, M Lämmlin, D Bimberg, M G Thompson, K T Tan, C Marinelli, A Wonfor, R Sellin, R V Penty, et al.


  • Wavelength-stabilized tilted cavity quantum dot laser

    by N N Ledentsov, V A Shchukin, S S Mikhrin, I L Krestnikov, A V Kozhukhov, A R Kovsh, L Ya Karachinsky, M V Maximov, I I Novikov, Yu M Shernyakov


  • Near-ideal InAs QDs on GaAs substrates for 1.3–1.5m laser applications

    by N N Ledentsov, A E Zhukov, V M Ustinov, M V Maximov, Yu M Shernyakov, N V Kryzhanovskaya, I N Kaiander, D Ouyang, R Sellin, N D Zakharov, et al.

    1.3–1.5µm Quantum dot (QD) lasers on GaAs substrates demonstrate near-ideal device parameters. Pseudomorphic 1.3µm InAs-GaAs QD lasers demonstrate low threshold current density (Jth300K < 100A/cm2), high differential efficiency (ηdiff > 80%), and low losses (α < 1.5cm–1 all realized in the same device. Characteristic temperature for the threshold current is ~170K up to 70°C. Reduced linewidth enhancement factor is advantageous for low-chirp operation and makes it possible to suppress completely beam filamentation up to stripe widths ~100µm. GaAs-based 1.3µm QD vertical-cavity surface-emitting lasers (VCSELs) with 8µm oxide aperture emit up to 2mW single mode continuous wave (CW) optical power. Metamorphic 1.5µm QD lasers on GaAs substrates with high quantum efficiency (ηi > 60–70%) and low losses (α < 3–4cm–1 and operating at power levels beyond 7W are fabricated.