TDTom Dietrich

Tom Dietrich

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tom Dietrich has a total of 39 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Detrimental effects of period-chirped gratings in pulse compressors

    by Florian Bienert, Christoph Röcker, Tom Dietrich, Thomas Graf, Marwan Abdou Ahmed

    We present a comprehensive simulative and experimental investigation of how period-chirped pulse compression gratings affect the compressed pulses. A specifically developed ray-tracing tool was used for the simulative investigations. It is shown that the chirp creates a characteristic spatio-spectral error pattern, which leads to a degradation of the beam quality and an increase of the pulse duration. The experimental investigations, for which both a narrow-bandwidth continuous-wave and a pulsed laser beam were guided through a Treacy-compressor comprised of period-chirped gratings, confirm the simulation results and present methods on how to identify the chirp’s characteristic error pattern in practice.


  • Open Access

    Ultrafast thin-disk multipass laser amplifier scheme avoiding misalignment induced by natural convection of the ambient air

    by Christoph Röcker, Jan-Philipp Negel, André Loescher, Tom Dietrich, Stefan Piehler, Benjamin Dannecker, Thomas Graf, Marwan Abdou Ahmed

    Laser material processing with ultrashort laser pulses has been a rapidly growing field in recent years. Several promising applications demand high average power in order to increase productivity as well as for high pulse energies to allow for multispot parallel processing.1 In particular, processing at low repetition rates in the range of several tens of kilohertz is promising since thermal damage induced by heat accumulation caused by consecutive pulses can be effectively avoided.2,3 By now, several laser architectures are suited to deliver average power in the kW range.4–8 Due to the completely passive approach, the low number of transmissive optics, and the possibility to scale the beam diameter to reduce nonlinear effects, the thin-disk based multipass amplifier (TDMPA) scheme is a promising architecture to reach very high output power and energy.9–12 However, due to the deflection of the laser beam, which is caused by the heated ambient air in front of the surface of the pumped laser crystal by natural convection (referred to as “air-wedge” in the following), the output power that can be achieved in the TDMPA architecture is limited to a few hundreds of watts, if no compensating element is used, such as introduced in Ref. 11. In contrast to thin-disk based regenerative amplifiers, which are based on a cavity and therefore can be realigned with the end mirror to compensate for pump power-dependent misalignment, the realignment of a TDMPA during high power operation is particularly critical due to the long propagation length of the signal beam in the amplifier. To maintain the alignment of the beam path, the TDMPA architecture, therefore, relies on passive compensation strategies. For this reason, state-of-the-art TDMPAs require a retroreflecting mirror pair (RMP) in order to minimize the deflection of the laser beam caused by the air-wedge effect.11 But even with the RMP, residual pump power-dependent air-wedge induced misalignment is usually observed. Other approaches, such as the operation in vacuum or a helium atmosphere, demonstrated to reduce thermo-optical wavefront aberrations in an oscillator and should also be applicable to TDMPAs but increase the complexity of the overall system.13,14 For laser resonators operating in continuous wave, a passive compensation based on a grating end mirror in Littrow configuration has been successfully demonstrated.15 But as this concept requires the feedback of a resonator to allow for a shift in the oscillating wavelength to correct for an air-wedge induced change of the angle of incidence on the grating, this approach cannot be applied to TDMPAs. Another common approach to reduce the pump power-dependent misalignment caused by the air-wedge effect is the reduction of the temperature of the laser crystal by reducing the heat generated during the pumping process of the laser active medium. This is accomplished by a reduction of the quantum defect by pumping directly in the upper laser level, which is usually referred to as “zero phonon line pumping (ZPL).”11,14,16–19 For Yb:YAG-based systems, the pump spectrum, in this case, needs to be locked to 969 nm (∼3 nm FWHM) instead of 940 nm (∼15 nm FWHM).17 Although ZPL significantly reduces the heat load, it can neither completely avoid heating of the laser crystal nor the resulting thermally induced effects.


  • Entwurf deformierbarer Spiegel für den Einsatz in Hochleistungslasern

    by Kevin Schmidt, Stefan Piehler, Benjamin Dannecker, Tom Dietrich, Adrian Raisch, Thomas Graf, Marwan Abdou Ahmed, Oliver Sawodny

    Zusammenfassung: Thermische Effekte limitieren die Leistungsskalierbarkeit in Hochleistungsscheibenlasern und können durch konstruktive Maßnahmen nur bedingt reduziert werden. Ein neuartiger Ansatz zur Kompensation der thermisch induzierten Effekte wird durch den resonatorinternen Einsatz hochleistungstauglicher adaptiver Spiegel ermöglicht. In diesem Beitrag werden hierfür zwei mögliche Technologien vorgestellt und charakterisiert: Während pneumatisch aktuierte Flächenlastspiegel eine gezielte Kompensation bekannter Wellenfrontstörungen erlauben, bieten optisch adressierte deformierbare Spiegel die Möglichkeit nahezu arbiträre Deformationen zu realisieren. Jene Bauform nutzt thermoelastische Effekte infolge der lokalen Erwärmung des Spiegels um gewünschte Deformationen zu erzielen.


  • Thin-disk oscillator delivering radially polarized beams with up to 980 W of CW output power

    by Tom Dietrich, Martin Rumpel, Frieder Beirow, Cherry May Mateo, Christof Pruss, Wolfgang Osten, Marwan Abdou Ahmed, Thomas Graf

    We report on the generation of kW-class, continuous-wave, radially polarized laser radiation in an Yb:LuAG thin-disk laser (TDL). Output powers of up to 980 W were achieved with optical efficiency of 50.5% with respect to the incident pump power of the TDL. The degree of radial polarization was measured to be 95.5% at maximum output power. This was achieved by the integration of a new generation of broadband, large-area grating-waveguide mirror with unprecedented high polarization discrimination as the end-mirror in the TDL resonator.


  • Open Access

    Radially polarized passively mode-locked thin-disk laser oscillator emitting sub-picosecond pulses with an average output power exceeding the 100 W level

    by Frieder Beirow, Michael Eckerle, Benjamin Dannecker, Tom Dietrich, Marwan Abdou Ahmed, Thomas Graf

    We report on a high-power passively mode-locked radially polarized Yb:YAG thin-disk oscillator providing 125 W of average output power. To the best of our knowledge, this is the highest average power ever reported from a mode-locked radially polarized oscillator without subsequent amplification stages. Mode-locking was achieved by implementing a SESAM as the cavity end mirror and the radial polarization of the LG*01 mode was obtained by means of a circular Grating Waveguide Output Coupler. The repetition rate was 78 MHz. A pulse duration of 0.97 ps and a spectral bandwidth of 1.4 nm (FWHM) were measured at the maximum output power. This corresponds to a pulse energy of 1.6 µJ and a pulse peak power of 1.45 MW. A high degree of radial polarization of 97.3 ± 1% and an M2-value of 2.16 which is close to the theoretical value for the LG*01 doughnut mode were measured.


  • Passive compensation of beam misalignment caused by air convection in thin-disk lasers

    by Tom Dietrich, Stefan Piehler, Christoph Röcker, Martin Rumpel, Marwan Abdou Ahmed, Thomas Graf

    We present a new approach to passively compensate for the misalignment instabilites caused by convection of heated ambient air in front of a thin-disk laser crystal by means of exploiting the spectral dispersion of a diffracting grating-waveguide mirror.


  • Passive compensation of the misalignment instability caused by air convection in thin-disk lasers

    by Tom Dietrich, Stefan Piehler, Christoph Röcker, Martin Rumpel, Marwan Abdou Ahmed, Thomas Graf

    Wavefront distortions caused by the convection of heated ambient air in front of the laser crystal induce severe pump-power-dependent misalignment in thin-disk laser (TDL) resonators. This effect is particularly pronounced in fundamental mode operation and limits the output power when no realignment of the resonator is possible during operation. In this Letter, we present a new approach to passively compensate for this misalignment instability by exploiting the spectral dispersion of a highly efficient grating-waveguide mirror used as a cavity end-mirror in a Littrow configuration. By this, it was possible to almost triple the output power of a fundamental mode Yb:LuAG TDL pumped at 969 nm.


  • High-power single-stage single-crystal Yb:YAG fiber amplifier for radially polarized ultrashort laser pulses

    by Michael Eckerle, Frieder Beirow, Tom Dietrich, Frederik Schaal, Christof Pruss, Wolfgang Osten, Nicolas Aubry, Matthieu Perrier, Julien Didierjean, Xavier Délen, et al.


  • Open Access

    Highly-efficient continuous-wave intra-cavity frequency-doubled Yb:LuAG thin-disk laser with 1 kW of output power

    by Tom Dietrich, Stefan Piehler, Martin Rumpel, Philippe Villeval, Dominique Lupinski, Marwan Abdou-Ahmed, Thomas Graf

    We report on the generation of continuous-wave, intra-cavity frequency-doubled, multi-mode laser radiation in an Yb:LuAG thin-disk laser. Output powers of up to 1 kW at a wavelength of 515 nm were achieved at an unprecedented optical efficiency of 51.6% with respect to the pumping power of the thin-disk laser. The wavelength stabilization and spectral narrowing as well as the polarization selection, which is necessary for a stable and efficient second-harmonic generation, was achieved by the integration of a diffraction grating into the dielectric end mirror of the cavity, which exhibits a diffraction efficiency of 99.8%. At a frequency-doubled output power of 820 W the peak-to-valley power fluctuations measured during 100 minutes of laser operation amounted to only 8.2 W (1.0%). The beam parameter product of the frequency-doubled output was 3.4 mm·mrad (M2 ≈ 20), which is suitable for standard beam delivery using fibers with a core diameter of 100 µm and a NA of 0.2.


  • Open Access

    Deformable mirrors for intra-cavity use in high-power thin-disk lasers

    by Stefan Piehler, Tom Dietrich, Philipp Wittmüss, Oliver Sawodny, Marwan Abdou Ahmed, Thomas Graf

    We present deformable mirrors for the intra-cavity use in high-power thin-disk laser resonators. The refractive power of these mirrors is continuously adaptable from −0.7 m−1 to 0.3 m−1, corresponding to radii of curvature ranging between 2.86 m (convex) and 6.67 m (concave). The optimized shape of the mirror membrane enables a very low peak-to-valley deviation from a paraboloid deformation over a large area. With the optical performance of our mirrors being equal to that of standard HR mirrors, we were able to demonstrate the tuning of the beam quality of a thin-disk laser in a range of M2 = 3 to M2 = 1 during laser operation at output powers as high as 1.1 kW.