Ivan I. Townsend
Research Subjects
Research Interests
Ivan I. Townsend has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Robert P. Mueller
Swamp Works Laboratory, NASA Kennedy Space Center (KSC), Mail Stop: UB-R1, Kennedy Space Center, FL 32899
9 shared publications - James G. Mantovani
Physicist, Granular Mechanics and Regolith Operations Laboratory, National Aeronautics and Space Administration (NASA) Kennedy Space Center, NE-S-1, Kennedy Space Center, FL 32899
4 shared publications - Andrew J. Nick
Swamp Works Laboratory, Sierra Lobo, Kennedy Space Center, FL 32899
3 shared publications - Jason M. Schuler
Swamp Works Laboratory, Enterprise Advisory Services Inc., Kennedy Space Center, FL 32899
3 shared publications - J. C. Fikes
NASA MSFC, ST23, Huntsville, AL 35812
2 shared publications - Jennifer Edmunson
Jacobs Technologies, Inc
2 shared publications
Latest Publications
- 15 November 2018
- Published by American Society of Civil Engineers (ASCE)
- p. 193-206
Additive Construction with Mobile Emplacement (ACME)/Automated Construction of Expeditionary Structures (ACES) Materials Delivery System (MDS)
The automated construction of expeditionary structures, phase 3 (ACES 3) project incorporates a liquid goods delivery system (LGDS) into a dry goods delivery system (DGDS) structure to create an integrated and automated ACES 3 materials delivery system (MDS) for 3D printing structures with ordinary Portland cement (OPC) concrete. ACES 3 is a prototype system which 3D prints barracks for soldiers in forward bases, here on Earth. The LGDS supports ACES 3 by storing liquid materials, mixing recipe batches of liquid materials, and working with the DGDS previously developed for ACES 2, combining a specialized concrete recipe of materials that are eventually extruded out of the print nozzle. ACES 3 is a project led by the U.S. Army Corps of Engineers (USACE), Engineering Research and Development Center (ERDC)—Construction Engineering Research Lab (CERL), and supported by NASA Kennedy Space Center (KSC) and Marshall Space Flight Center (MSFC). The equivalent 3D printing system for construction in space is designated additive construction with mobile emplacement (ACME) by NASA.
- 15 November 2018
- Published by American Society of Civil Engineers (ASCE)
- p. 193-206
Additive Construction with Mobile Emplacement (ACME)/Automated Construction of Expeditionary Structures (ACES) Materials Delivery System (MDS)
The automated construction of expeditionary structures, phase 3 (ACES 3) project incorporates a liquid goods delivery system (LGDS) into a dry goods delivery system (DGDS) structure to create an integrated and automated ACES 3 materials delivery system (MDS) for 3D printing structures with ordinary Portland cement (OPC) concrete. ACES 3 is a prototype system which 3D prints barracks for soldiers in forward bases, here on Earth. The LGDS supports ACES 3 by storing liquid materials, mixing recipe batches of liquid materials, and working with the DGDS previously developed for ACES 2, combining a specialized concrete recipe of materials that are eventually extruded out of the print nozzle. ACES 3 is a project led by the U.S. Army Corps of Engineers (USACE), Engineering Research and Development Center (ERDC)—Construction Engineering Research Lab (CERL), and supported by NASA Kennedy Space Center (KSC) and Marshall Space Flight Center (MSFC). The equivalent 3D printing system for construction in space is designated additive construction with mobile emplacement (ACME) by NASA.
- 15 November 2018
- Published by American Society of Civil Engineers (ASCE)
- p. 782-792
Additive Construction with Mobile Emplacement: Multifaceted Planetary Construction Materials Development
The National Aeronautics and Space Administration’s additive construction with mobile emplacement (ACME) project is developing construction materials with which infrastructure elements, including habitats, will be additively constructed for planetary surface missions. These materials must meet requirements such as the ability to be produced from available in situ resources to eliminate the cost of launching materials from Earth, the ability to be emplaced via three dimensional building techniques, the ability to resist aging in extreme environments including radiation and micrometeorite bombardment, and the ability to provide the necessary structural integrity for a given building. This paper reviews the constraints placed on such planetary construction materials and details the work of the ACME team in characterizing materials that could one day construct planetary surface structures on Mars or the Moon. Material compositions, compressive strength, and requirements for additive construction on planetary surfaces are discussed. Due to the multifunctional requirements of the material, an optimization is necessary to balance between the site-specific regolith composition, emplacement via additive construction techniques, and characteristics of the final structure.
- 15 November 2018
- Published by American Society of Civil Engineers (ASCE)
- p. 782-792
Additive Construction with Mobile Emplacement: Multifaceted Planetary Construction Materials Development
The National Aeronautics and Space Administration’s additive construction with mobile emplacement (ACME) project is developing construction materials with which infrastructure elements, including habitats, will be additively constructed for planetary surface missions. These materials must meet requirements such as the ability to be produced from available in situ resources to eliminate the cost of launching materials from Earth, the ability to be emplaced via three dimensional building techniques, the ability to resist aging in extreme environments including radiation and micrometeorite bombardment, and the ability to provide the necessary structural integrity for a given building. This paper reviews the constraints placed on such planetary construction materials and details the work of the ACME team in characterizing materials that could one day construct planetary surface structures on Mars or the Moon. Material compositions, compressive strength, and requirements for additive construction on planetary surfaces are discussed. Due to the multifunctional requirements of the material, an optimization is necessary to balance between the site-specific regolith composition, emplacement via additive construction techniques, and characteristics of the final structure.
- 12 January 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 414-424
Dust Tolerant Automated Umbilical (DTAU)
Regolith is present on most planetary surfaces such as Earth’s moon, Mars, and asteroids. If human crews and robotic machinery are to operate on these regolith covered surfaces, then they must face the consequences of interacting with regolith fines which consist of particles below 100 microns in diameter down to as small as sub-micron scale particles. Such fine dust will intrude into mechanism and interfaces causing a variety of problems such as contamination of clean fluid lines, jamming of mechanisms, and damaging connector seals and couplings. Since multiple elements must be assembled in space for system level functionality, then it will be inevitable that interfaces will be necessary for connections to pass commodities such as cryogenic liquid propellants, purge and buffer gases, water, breathing air, pressurizing gases, heat exchange fluids, power, and data. Dust tolerant automated umbilical (DTAU) systems which can operate in dusty planetary surfaces have been under development at NASA’s Kennedy Space Center (KSC) for a number of years. Engineering development unit (EDU) prototypes of a DTAU have been built and tested. The design and operation of these prototypes are explained and discussed in this paper.
- 12 January 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 414-424
Dust Tolerant Automated Umbilical (DTAU)
Regolith is present on most planetary surfaces such as Earth’s moon, Mars, and asteroids. If human crews and robotic machinery are to operate on these regolith covered surfaces, then they must face the consequences of interacting with regolith fines which consist of particles below 100 microns in diameter down to as small as sub-micron scale particles. Such fine dust will intrude into mechanism and interfaces causing a variety of problems such as contamination of clean fluid lines, jamming of mechanisms, and damaging connector seals and couplings. Since multiple elements must be assembled in space for system level functionality, then it will be inevitable that interfaces will be necessary for connections to pass commodities such as cryogenic liquid propellants, purge and buffer gases, water, breathing air, pressurizing gases, heat exchange fluids, power, and data. Dust tolerant automated umbilical (DTAU) systems which can operate in dusty planetary surfaces have been under development at NASA’s Kennedy Space Center (KSC) for a number of years. Engineering development unit (EDU) prototypes of a DTAU have been built and tested. The design and operation of these prototypes are explained and discussed in this paper.
- 12 January 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 960-971
Launch Pad in a Box
This paper describes a deployable launch system capability being developed at NASA KSC that was publicly announced in May 2015. It is a set of multi-user ground support equipment that will be used to test and launch small class launch vehicles. The paper also describes a transportable modular launch/landing pad concept that was developed to support vertical takeoff vertical landing vehicles, such as the NASA JSC Morpheus Lander, and discusses rocket plume effects on launch/landing pad surfaces.
- 12 January 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 960-971
Launch Pad in a Box
This paper describes a deployable launch system capability being developed at NASA KSC that was publicly announced in May 2015. It is a set of multi-user ground support equipment that will be used to test and launch small class launch vehicles. The paper also describes a transportable modular launch/landing pad concept that was developed to support vertical takeoff vertical landing vehicles, such as the NASA JSC Morpheus Lander, and discusses rocket plume effects on launch/landing pad surfaces.
- 12 January 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 653-667
Planetary Basalt Field Project: Construction of a Lunar Launch/Landing Pad, PISCES and NASA Kennedy Space Center Project Update
Recently, NASA Headquarters invited the pacific international space center for exploration systems (PISCES) to become a strategic partner in a new project called “additive construction with mobile emplacement (ACME)”. The goal of this project is to investigate technologies and methodologies for constructing facilities and surface systems infrastructure on the Moon and Mars using planetary basalt and other in situ materials. The first phase of this project was to robotically-build a 20 meter (66-ft) diameter vertical takeoff, vertical landing (VTVL) prototype pad out of local basalt material on the Big Island of Hawaii. This VTVL pad is a technology “proof of concept” demonstration project to show how a robotic precursor mission could viably construct a VTVL pad on a planetary surface. Such VTVL pads can mitigate the effects of a lander rocket engine exhaust plume impinging on the regolith surface, which can cause cratering and high speed ejecta. In March 2015 a “lunar sidewalk” construction was first completed in Hilo, Hawaii, which proved that raw crushed Hawaiian basalt could be sintered into modular paver elements. The Hawaiian basalt is very similar to granular materials found on Mars and the Moon. Subsequently, PISCES and the NASA Kennedy space center (KSC) Swamp Works team completed the basalt construction of a tele-operated, robotically-built basalt VTVL pad. Construction was started in October 2015 and successfully completed by the end of December 2015. PISCES and NASA KSC assessed various in situ construction methodologies for the 2015 VTVL pad deployment demonstration using additive construction with Hawaiian basalt regolith. Using the PISCES robotic rover (named “Helelani”) as the central platform for construction, the team evaluated a variety of technologies for stabilizing the basalt surface, and then selected a sintered inter-locking paver system to meet the requirements. New methods for sintered basalt regolith paver production were developed and a tele-operated paver deployment mechanism (PDM) was developed and installed on the PISCES rover to simulate VTVL pad construction operations during an actual space mission. The rover was tele-operated locally in Hilo, Hawaii, and also from NASA KSC in Florida, which created valuable lessons learned for future space missions requiring a VTVL pad capability.
- 12 January 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 653-667
Planetary Basalt Field Project: Construction of a Lunar Launch/Landing Pad, PISCES and NASA Kennedy Space Center Project Update
Recently, NASA Headquarters invited the pacific international space center for exploration systems (PISCES) to become a strategic partner in a new project called “additive construction with mobile emplacement (ACME)”. The goal of this project is to investigate technologies and methodologies for constructing facilities and surface systems infrastructure on the Moon and Mars using planetary basalt and other in situ materials. The first phase of this project was to robotically-build a 20 meter (66-ft) diameter vertical takeoff, vertical landing (VTVL) prototype pad out of local basalt material on the Big Island of Hawaii. This VTVL pad is a technology “proof of concept” demonstration project to show how a robotic precursor mission could viably construct a VTVL pad on a planetary surface. Such VTVL pads can mitigate the effects of a lander rocket engine exhaust plume impinging on the regolith surface, which can cause cratering and high speed ejecta. In March 2015 a “lunar sidewalk” construction was first completed in Hilo, Hawaii, which proved that raw crushed Hawaiian basalt could be sintered into modular paver elements. The Hawaiian basalt is very similar to granular materials found on Mars and the Moon. Subsequently, PISCES and the NASA Kennedy space center (KSC) Swamp Works team completed the basalt construction of a tele-operated, robotically-built basalt VTVL pad. Construction was started in October 2015 and successfully completed by the end of December 2015. PISCES and NASA KSC assessed various in situ construction methodologies for the 2015 VTVL pad deployment demonstration using additive construction with Hawaiian basalt regolith. Using the PISCES robotic rover (named “Helelani”) as the central platform for construction, the team evaluated a variety of technologies for stabilizing the basalt surface, and then selected a sintered inter-locking paver system to meet the requirements. New methods for sintered basalt regolith paver production were developed and a tele-operated paver deployment mechanism (PDM) was developed and installed on the PISCES rover to simulate VTVL pad construction operations during an actual space mission. The rover was tele-operated locally in Hilo, Hawaii, and also from NASA KSC in Florida, which created valuable lessons learned for future space missions requiring a VTVL pad capability.
- 12 January 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 629-641
Basalt Materials and Technologies for Vertical Take Off, Vertical Landing (VTVL) Rocket Pads
This objective of this project was to propose the fabrication of porous construction materials from lunar, Mars, or terrestrial basalt regolith to help address the technology needs for safe and efficient space exploration identified in NASA Space Technology Roadmap (TA-12), Materials, Structures, Mechanical Systems and Manufacturing. The proposed technology also addresses in situ resource utilization and construction and assembly found in the roadmap (TA-7), Human Exploration Destination Systems. This technology combines an innovative regolith processing method, using supercritical fluids, with extrusion and injection molding, which are used to produce useful shapes. The innovation differs from existing technologies in that the low density allows for faster processing time and lower power requirements, while producing complex shapes allowed by injection molding. In this paper, we have summarized the results of a new and innovative method for terrestrial and in-space production of materials/systems for use in exploration activities such as roads, habitats, radiation shielding, launch/landing pads, and ejecta mitigation: the supercritical processing of basalt materials.
- 12 January 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 629-641
Basalt Materials and Technologies for Vertical Take Off, Vertical Landing (VTVL) Rocket Pads
This objective of this project was to propose the fabrication of porous construction materials from lunar, Mars, or terrestrial basalt regolith to help address the technology needs for safe and efficient space exploration identified in NASA Space Technology Roadmap (TA-12), Materials, Structures, Mechanical Systems and Manufacturing. The proposed technology also addresses in situ resource utilization and construction and assembly found in the roadmap (TA-7), Human Exploration Destination Systems. This technology combines an innovative regolith processing method, using supercritical fluids, with extrusion and injection molding, which are used to produce useful shapes. The innovation differs from existing technologies in that the low density allows for faster processing time and lower power requirements, while producing complex shapes allowed by injection molding. In this paper, we have summarized the results of a new and innovative method for terrestrial and in-space production of materials/systems for use in exploration activities such as roads, habitats, radiation shielding, launch/landing pads, and ejecta mitigation: the supercritical processing of basalt materials.
- 12 January 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 36-47
Optical Extinction Measurements of Dust Density in the GMRO Regolith Test Bin
A regolith simulant test bin was constructed and completed in the Granular Mechanics and Regolith Operations (GMRO) Lab in 2013. This planetary regolith test bed (PRTB) is a 64 m2 × 1 m deep test bin housed in a climate-controlled facility and contains 120 MT of lunar-regolith simulant, called Black Point-1 or BP-1, from Black Point, AZ. One of the current uses of the test bin is to study the effects of difficult lighting and dust conditions on telerobotic perception systems to better assess and refine regolith operations for asteroid, Mars, and polar lunar missions. Low illumination and low angle of incidence lighting pose significant problems to computer vision and human perception. Levitated dust on asteroids interferes with imaging and degrades depth perception. Dust storms on Mars pose a significant problem. Due to these factors, the likely performance of telerobotics is poorly understood for future missions. Current space telerobotic systems are only operated in bright lighting and dust-free conditions. This technology development testing will identify: (1) the impact of degraded lighting and environmental dust on computer vision and operator perception, (2) potential methods and procedures for mitigating these impacts, (3) requirements for telerobotic perception systems for asteroid capture, Mars dust storms, and lunar regolith ISRU missions.
- 12 January 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 36-47
Optical Extinction Measurements of Dust Density in the GMRO Regolith Test Bin
A regolith simulant test bin was constructed and completed in the Granular Mechanics and Regolith Operations (GMRO) Lab in 2013. This planetary regolith test bed (PRTB) is a 64 m2 × 1 m deep test bin housed in a climate-controlled facility and contains 120 MT of lunar-regolith simulant, called Black Point-1 or BP-1, from Black Point, AZ. One of the current uses of the test bin is to study the effects of difficult lighting and dust conditions on telerobotic perception systems to better assess and refine regolith operations for asteroid, Mars, and polar lunar missions. Low illumination and low angle of incidence lighting pose significant problems to computer vision and human perception. Levitated dust on asteroids interferes with imaging and degrades depth perception. Dust storms on Mars pose a significant problem. Due to these factors, the likely performance of telerobotics is poorly understood for future missions. Current space telerobotic systems are only operated in bright lighting and dust-free conditions. This technology development testing will identify: (1) the impact of degraded lighting and environmental dust on computer vision and operator perception, (2) potential methods and procedures for mitigating these impacts, (3) requirements for telerobotic perception systems for asteroid capture, Mars dust storms, and lunar regolith ISRU missions.
- 12 January 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 163-174
Design of an Excavation Robot: Regolith Advanced Surface Systems Operations Robot (RASSOR) 2.0
To continue on a sustainable and flexible path, NASA needs to address the challenge of collecting and moving large amounts of regolith at the destination. Acquiring the water resources on Mars will require mining significant quantities of regolith, and this is not possible with the state-of-the-art low mass excavation systems. Low gravity environments (Mars = 3/8G) and launch mass restrictions limit the traction and the resulting reaction force of the vehicle, making current terrestrial techniques impractical. This project addressed this challenge by developing a completely new technology that can mine large quantities of regolith on Mars. Recent measurements by the “Curiosity” rover on Mars have found that the regolith contains ~2% water by weight globally, ~4% in Jezero Crater (Human Architecture Team’s reference landing site), and much more at the poles. RASSOR 2.0 is a planetary excavator, which has a mass of 66 kg, with a 0.38 kg vehicle mass per kilogram, per hour of excavation rate and power usage of 4 W per kg of regolith excavation rate. A single RASSOR 2.0 can excavate a minimum of 2.7 metric tons of regolith per day. This is accomplished by using counteracting excavation forces on two opposing digging implements called bucket drums and an autonomous mining control system. This work has addressed several major research areas outlined in the NASA Technology Area (TA) 04 Robotics and Autonomous Systems and TA 07 Human Destination Systems roadmaps. This project started at Technology Readiness Level (TRL) 4 as a low fidelity “proof of concept” prototype which has successfully demonstrated basic regolith simulant excavation functionality in a lab-scale gravity off load test. The foundational technology described here was awarded US patent number: US 9027265 for a “Zero horizontal reaction force excavator” on May 12, 2015.
- 12 January 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 163-174
Design of an Excavation Robot: Regolith Advanced Surface Systems Operations Robot (RASSOR) 2.0
To continue on a sustainable and flexible path, NASA needs to address the challenge of collecting and moving large amounts of regolith at the destination. Acquiring the water resources on Mars will require mining significant quantities of regolith, and this is not possible with the state-of-the-art low mass excavation systems. Low gravity environments (Mars = 3/8G) and launch mass restrictions limit the traction and the resulting reaction force of the vehicle, making current terrestrial techniques impractical. This project addressed this challenge by developing a completely new technology that can mine large quantities of regolith on Mars. Recent measurements by the “Curiosity” rover on Mars have found that the regolith contains ~2% water by weight globally, ~4% in Jezero Crater (Human Architecture Team’s reference landing site), and much more at the poles. RASSOR 2.0 is a planetary excavator, which has a mass of 66 kg, with a 0.38 kg vehicle mass per kilogram, per hour of excavation rate and power usage of 4 W per kg of regolith excavation rate. A single RASSOR 2.0 can excavate a minimum of 2.7 metric tons of regolith per day. This is accomplished by using counteracting excavation forces on two opposing digging implements called bucket drums and an autonomous mining control system. This work has addressed several major research areas outlined in the NASA Technology Area (TA) 04 Robotics and Autonomous Systems and TA 07 Human Destination Systems roadmaps. This project started at Technology Readiness Level (TRL) 4 as a low fidelity “proof of concept” prototype which has successfully demonstrated basic regolith simulant excavation functionality in a lab-scale gravity off load test. The foundational technology described here was awarded US patent number: US 9027265 for a “Zero horizontal reaction force excavator” on May 12, 2015.
- 1 January 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Aerospace Engineering
- Vol. 26 (1) , 169-175
Planetary Regolith Delivery Systems for ISRU
This paper describes tests conducted since 2008 at the National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC) to address engineering challenges associated with delivering planetary regolith to in situ resource utilization (ISRU) systems. The need to excavate regolith under reduced-gravity conditions on a planetary surface and then deliver it to systems for material analysis and/or processing constrains the possible engineering approaches that can be used in space. Mission costs may further limit the mass and available power of a regolith delivery system. Mechanical systems operating in a planetary environment require high reliability with respect to system service life because it is usually difficult or impossible to perform maintenance robotically on a planetary surface. The regolith delivery system for most ISRU systems must have a leak-tight interface between the near-vacuum found on a planetary surface and the pressurized atmosphere within the ISRU reactor. Depending o...
- 1 January 2013
- Published by American Society of Civil Engineers (ASCE) in Journal of Aerospace Engineering
- Vol. 26 (1) , 169-175
Planetary Regolith Delivery Systems for ISRU
This paper describes tests conducted since 2008 at the National Aeronautics and Space Administration (NASA) Kennedy Space Center (KSC) to address engineering challenges associated with delivering planetary regolith to in situ resource utilization (ISRU) systems. The need to excavate regolith under reduced-gravity conditions on a planetary surface and then deliver it to systems for material analysis and/or processing constrains the possible engineering approaches that can be used in space. Mission costs may further limit the mass and available power of a regolith delivery system. Mechanical systems operating in a planetary environment require high reliability with respect to system service life because it is usually difficult or impossible to perform maintenance robotically on a planetary surface. The regolith delivery system for most ISRU systems must have a leak-tight interface between the near-vacuum found on a planetary surface and the pressurized atmosphere within the ISRU reactor. Depending o...
- 11 March 2010
- Published by American Society of Civil Engineers (ASCE)
- p. 1353-1363
Pneumatic Regolith Transfer Systems for In Situ Resource Utilization
One aspect of In-Situ Resource Utilization (ISRU) in a lunar environment is to extract oxygen and other elements from the minerals that make up the lunar regolith. Typical ISRU oxygen production processes include but are not limited to hydrogen reduction, carbothermal and molten oxide electrolysis. All of these processes require the transfer of regolith from a supply hopper into a reactor for chemical reaction processing, and the subsequent extraction of the reacted regolith from the reactor. This paper will discuss recent activities in the NASA ISRU project involved with developing pneumatic conveying methods to achieve lunar regolith simulant transfer under 1-g and 1/6-g gravitational environments. Examples will be given of hardware that has been developed and tested by NASA on reduced gravity flights. Lessons learned and details of pneumatic regolith transfer systems will be examined as well as the relative performance in a 1/6th G environment.
- 11 March 2010
- Published by American Society of Civil Engineers (ASCE)
- p. 1353-1363
Pneumatic Regolith Transfer Systems for In Situ Resource Utilization
One aspect of In-Situ Resource Utilization (ISRU) in a lunar environment is to extract oxygen and other elements from the minerals that make up the lunar regolith. Typical ISRU oxygen production processes include but are not limited to hydrogen reduction, carbothermal and molten oxide electrolysis. All of these processes require the transfer of regolith from a supply hopper into a reactor for chemical reaction processing, and the subsequent extraction of the reacted regolith from the reactor. This paper will discuss recent activities in the NASA ISRU project involved with developing pneumatic conveying methods to achieve lunar regolith simulant transfer under 1-g and 1/6-g gravitational environments. Examples will be given of hardware that has been developed and tested by NASA on reduced gravity flights. Lessons learned and details of pneumatic regolith transfer systems will be examined as well as the relative performance in a 1/6th G environment.