NDNeil A. Duffie

Neil A. Duffie

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Neil A. Duffie has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Analytical and Experimental Investigation of Thermocapillary Flow in Pulsed Laser Micropolishing

    by Chao Ma, Madhu Vadali, Xiaochun Li, Neil A. Duffie, Frank E. Pfefferkorn

    The objective of this paper is to define and derive a dimensionless number as a function of material properties and process parameters to quantify the extent (magnitude) of thermocapillary flow in pulsed laser micropolishing (PLμP). Experimental work has shown that thermocapillary flow can tremendously reduce surface roughness (smoothing effect) although it inevitably introduces additional surface features (roughening effect) at the same time. Both the smoothing and roughening effects increase as the extent of thermocapillary flow increases. The extent of thermocapillary flow is the bridge from the available information (i.e., initial surface profile, material properties, and process parameters) to the polished surface profile to be predicted. A dimensionless number, called the normalized average displacement of a liquid particle in a single laser pulse, is proposed and derived via analytical heat transfer and fluid flow equations. The calculated normalized displacement is found to be proportional to the measured slope of the introduced features on Ti6Al4V surface polished with various process parameters, which indicates that the dimensionless number successfully describes the extent of thermocapillary flow. The normalized average displacement will be very useful for prediction of polished surface profile and hence parameter selection and process optimization in the future.


  • Melt Pool Flow and Surface Evolution During Pulsed Laser Micro Polishing of Ti6Al4V

    by Chao Ma, Madhu Vadali, Neil A. Duffie, Frank E. Pfefferkorn, Xiaochun Li

    Extensive experimental work has shown that pulsed laser micro polishing (PLμP) is effective for polishing micro metallic parts. However, the process physics have not been fully understood yet, especially with respect to the melt pool flow. A reliable physical model can be of significant assistance in understanding the fluid flow in the melt pool and its effect on PLμP. In this paper, a two-dimensional axisymmetric transient model that couples heat transfer and fluid flow is described that was constructed using the finite element method. The model not only provided the solutions to the temperature and velocity fields but also predicted the surface profile evolution on a free deformable surface. The simulated melt depth and resolidified surface profiles matched those obtained from optical images of PLμPed Ti6Al4V sample cross-sections. The model was also used to study the effect of laser pulse duration on the melt pool flow. The study suggests that longer pulses produce more significant fluid flows. The cut-off pulse duration between capillary and thermocapillary regimes, below which minimal Maragoni flow should be expected, was estimated to be 0.66 μs for Ti6Al4V, which also matched well with the experimental results. It is evident that the coupled model offers reliable predictions and thus can be extended for a more complex parametric study to provide further insights for PLμP.


  • Effects of Pulse Duration on Laser Micro Polishing

    by Madhu Vadali, Chao Ma, Neil A. Duffie, Xiaochun Li, Frank E. Pfefferkorn

    Pulsed laser micro polishing (PLμP) has been shown to be an effective method of polishing micro metallic parts whose surface roughness can approach the feature size. Laser pulse duration in the PLμP process is an important parameter that significantly affects the achievable surface finish. This paper describes the influence of laser pulse duration on surface roughness reduction during PLμP. For this purpose, near-infrared laser pulses have been used to polish Ti6Al4V at three different pulse durations: 0.65 μs, 1.91 μs, and 3.60 μs. PLμP at longer pulse durations resulted in dominating Marangoni convective flows, yet significantly higher reductions in the average surface roughness were observed compared to the short pulse duration regime without convection.


  • Coordination of capacity adjustment modes in work systems with autonomous WIP regulation

    by Neil Duffie, John Fenske, Madhu Vadali

    A method is presented in this paper for coordinating multiple modes of capacity adjustment in work systems with autonomous WIP regulation with the goal of maintaining desired fundamental dynamic behavior. To prevent overcorrection of capacity, adjustments involving floaters, temporary workers, overtime, etc. need to be coordinated, and it is shown that control-theoretic analysis can be used to develop algorithms for determining combinations of adjustments that result in WIP regulation that is as fast-acting as possible yet non-oscillatory. Results of discrete event simulations in Arena, driven by industrial data, are used to illustrate the dynamic behavior of WIP regulation in an autonomous work system that incorporates such an algorithm and multiple modes of capacity adjustment.


  • Biodegradability and Mechanical Performance of Hydroxyapatite Reinforced Magnesium Matrix Nanocomposite

    by Chao Ma, Lianyi Chen, Jiaquan Xu, Axel Fehrenbacher, Yan Li, Frank E. Pfefferkorn, Neil A. Duffie, Jing Zheng, Xiaochun Li