Hwayeon Song
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Hwayeon Song has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Youssef M. A. Hashash
Department of Civil & Environmental Engineering University of Illinois at Urbana‐Champaign Urbana Illinois USA
5 shared publications - Yun Y. Su
Graduate, Research Assistants, Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 205 N. Mathews Ave., Urbana, IL 61801
3 shared publications - Abdolreza Osouli
Associate Professor, Dept. of Civil and Environmental Engineering, Univ. of Illinois at Urbana–Champaign, 205 North Mathews, Urbana, IL 61801
2 shared publications - Liang. Y. Liu
Graduate Research Assistant, Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 205 N. Mathews Ave., Urbana, IL 61801
2 shared publications - Camilo Marulanda
INGETEC
1 shared publication - Jamshid Ghaboussi
Dept. of Civil Engineering, University of Akron, Akron, OH, 44325
1 shared publication
Latest Publications
- Open Access
- 1 May 2008
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 12 (3) , 165-176
The integration of numerical modeling and physical measurements through inverse analysis in geotechnical engineering
- 1 May 2008
- Published by Elsevier in KSCE Journal of Civil Engineering
- Vol. 12 (3) , 165-176
Open AccessThe integration of numerical modeling and physical measurements through inverse analysis in geotechnical engineering
- 21 September 2007
- Published by American Society of Civil Engineers (ASCE)
Soil Behavior and Excavation Instrumentation Layout
During the construction of urban excavations, instruments are installed to monitor ground response to various construction activities, to verify design assumptions and to effectively apply the observational approach. Data collected from these instruments are also used in inverse analyses to develop improved soil models suitable for representing soil response during excavation. This study examines the relationship between various instruments typically used on an excavation project and the quality of information that can be extracted for excavation modeling. A synthetically generated set of instrument measurements using an idealized soil profile are used. Instrument readings considered include inclinometers placed in the support wall and in the retained soil, surface settlement points, extensometers, heave gages, piezometers and strain gauges in the bracing system. Various combinations of measurements are used in a novel inverse analysis approach, SelfSim, to extract the soil behavior. The study shows that in addition to the measurements of lateral wall deflections and surface settlement, measured forces in the struts significantly improve the quality of the extracted soil behavior and the overall predictive capability of the model. Inclinometers placed some distance behind the wall also improve the predictive quality of the model especially small strain soil non-linearity and provide some redundancy to measured settlements.
- 21 September 2007
- Published by American Society of Civil Engineers (ASCE)
Soil Behavior and Excavation Instrumentation Layout
During the construction of urban excavations, instruments are installed to monitor ground response to various construction activities, to verify design assumptions and to effectively apply the observational approach. Data collected from these instruments are also used in inverse analyses to develop improved soil models suitable for representing soil response during excavation. This study examines the relationship between various instruments typically used on an excavation project and the quality of information that can be extracted for excavation modeling. A synthetically generated set of instrument measurements using an idealized soil profile are used. Instrument readings considered include inclinometers placed in the support wall and in the retained soil, surface settlement points, extensometers, heave gages, piezometers and strain gauges in the bracing system. Various combinations of measurements are used in a novel inverse analysis approach, SelfSim, to extract the soil behavior. The study shows that in addition to the measurements of lateral wall deflections and surface settlement, measured forces in the struts significantly improve the quality of the extracted soil behavior and the overall predictive capability of the model. Inclinometers placed some distance behind the wall also improve the predictive quality of the model especially small strain soil non-linearity and provide some redundancy to measured settlements.
- 15 May 2006
- Published by American Society of Civil Engineers (ASCE)
- p. 336-341
New Technologies for Tracking Urban Excavation Progress and Estimating Deformations
This paper describes novel developments of tools for predicting, monitoring, and controlling ground movements associated with excavations in urban areas. The paper describes developments in the following areas (1) Laser scanning for developing an accurate record of construction activities, (2) Intelligent, self-updating numerical models to compute anticipated ground movements, and to learn from field observations, and (3) integration of heterogeneous data using a GIS based system. These new technologies are illustrated using excavations in the Chicago area.
- 15 May 2006
- Published by American Society of Civil Engineers (ASCE)
- p. 336-341
New Technologies for Tracking Urban Excavation Progress and Estimating Deformations
This paper describes novel developments of tools for predicting, monitoring, and controlling ground movements associated with excavations in urban areas. The paper describes developments in the following areas (1) Laser scanning for developing an accurate record of construction activities, (2) Intelligent, self-updating numerical models to compute anticipated ground movements, and to learn from field observations, and (3) integration of heterogeneous data using a GIS based system. These new technologies are illustrated using excavations in the Chicago area.
- 21 February 2006
- Published by American Society of Civil Engineers (ASCE)
Use of New Technologies for Tracking Excavation Progress
With new development, and increasingly more redevelopment, within urban areas, there is a clear need to efficiently and safely develop underground space. A major concern when placing deep excavations in urban environments is the impact of construction-related ground movements on adjacent buildings and utilities. In practice, when designers are faced with an excavation where ground movements are a critical issue, they can estimate movements using semi-empirical methods or results of numerical modeling. It is common to include a monitoring program during construction to record the ground movements and, in some cases, adjacent building movements. Ideally, these observations would be used to control the construction process and update predictions of movements. This paper describes novel developments in the user of laser scanning and digital photogrammetry for developing an accurate record of construction activities. These new technologies are illustrated using excavations in the Chicago area.
- 21 February 2006
- Published by American Society of Civil Engineers (ASCE)
Use of New Technologies for Tracking Excavation Progress
With new development, and increasingly more redevelopment, within urban areas, there is a clear need to efficiently and safely develop underground space. A major concern when placing deep excavations in urban environments is the impact of construction-related ground movements on adjacent buildings and utilities. In practice, when designers are faced with an excavation where ground movements are a critical issue, they can estimate movements using semi-empirical methods or results of numerical modeling. It is common to include a monitoring program during construction to record the ground movements and, in some cases, adjacent building movements. Ideally, these observations would be used to control the construction process and update predictions of movements. This paper describes novel developments in the user of laser scanning and digital photogrammetry for developing an accurate record of construction activities. These new technologies are illustrated using excavations in the Chicago area.
- 24 June 2005
- Published by American Society of Civil Engineers (ASCE)
- p. 1-10
Field Tests of 3D Laser Scanning in Urban Excavation
When developing deep excavations in urban environments, a critical concern is the influence of construction-related ground movements on neighboring facilities and utilities. Ground movements may cause structures supported by the affected ground to deform and possibly be damaged. It is important to predict and control the extent and distribution of ground movements that result from constructing underground space. Currently, engineers can estimate ground movements using a combination of semi-empirical methods based in part on past performance data and the results from model simulation using numerical analysis. However these sophisticated analyses require accurate as-built construction staging data which most projects lack. The traditional approach of collecting field information is both labor-intensive and time-consuming. A system capable of gathering accurate as-built data in a timely manner would be highly beneficial for controlling and predicting ground movements in urban excavation sites. Significant developments in information technology are opening new ways to collect better as-built construction field data. A research team at the University of Illinois at Urbana-Champaign has been exploring the use of 3D laser scanning technology in urban excavation. Funded by National Science Foundation, this research field-tests the 3D laser scanning technology at urban sites in the Chicago area and explores better integration between engineering and construction field controls. This paper reports preliminary findings of the project, which include data from a five-month tracking of an urban construction site. It demonstrates the potential integration of 3D excavation data with finite analysis tools.
- 24 June 2005
- Published by American Society of Civil Engineers (ASCE)
- p. 1-10
Field Tests of 3D Laser Scanning in Urban Excavation
When developing deep excavations in urban environments, a critical concern is the influence of construction-related ground movements on neighboring facilities and utilities. Ground movements may cause structures supported by the affected ground to deform and possibly be damaged. It is important to predict and control the extent and distribution of ground movements that result from constructing underground space. Currently, engineers can estimate ground movements using a combination of semi-empirical methods based in part on past performance data and the results from model simulation using numerical analysis. However these sophisticated analyses require accurate as-built construction staging data which most projects lack. The traditional approach of collecting field information is both labor-intensive and time-consuming. A system capable of gathering accurate as-built data in a timely manner would be highly beneficial for controlling and predicting ground movements in urban excavation sites. Significant developments in information technology are opening new ways to collect better as-built construction field data. A research team at the University of Illinois at Urbana-Champaign has been exploring the use of 3D laser scanning technology in urban excavation. Funded by National Science Foundation, this research field-tests the 3D laser scanning technology at urban sites in the Chicago area and explores better integration between engineering and construction field controls. This paper reports preliminary findings of the project, which include data from a five-month tracking of an urban construction site. It demonstrates the potential integration of 3D excavation data with finite analysis tools.