Ronghui Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ronghui Wang has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Niujing Ma
School of Civil Engineering and Transportation, South China University of Technology, Guangzhou 510640, China
2 shared publications- Qinhe Li
School of Civil Engineering and Transportation, South China University of Technology, Guangzhou 510640, China
2 shared publications - Yuyang Chen
School of Civil Engineering and Transportation, South China University of Technology, Guangzhou 510640, China
2 shared publications - Zhe Hu
School of Civil Engineering and Transportation, South China University of Technology, Guangzhou 510640, China
2 shared publications - Abdulrhman Dhaif Allah Abdo Mohammed
Department of Civil Engineering, School of Civil Engineering and Transportation, South China University of Technology, Guangzhou 510640, China
1 shared publication - Chunguang Dong
Poly Changda Engineering Co., Ltd., Guangzhou 510620, China
1 shared publication
Latest Publications
- Open Access
Research on the Elastic Stiffness of Stud–PBL Composite Shear Connectors in Composite Bridge Pylons
The application of steel–concrete composite structures in the pylons of long-span cable-stayed bridges can effectively address the issue of insufficient structural stiffness. Shear connectors are critical load-transfer components in steel–concrete composite segments, where they are typically arranged to ensure coordinated force transmission between steel and concrete. The stud–PBL composite shear connector, as a novel type of connector, has been implemented in engineering practice. However, the collaborative load-bearing performance between studs and PBL connectors remains unclear. Most shear connectors operate within the elastic stage during service, making their elastic stiffness a key evaluation metric. Based on the Winkler elastic foundation beam theory, plane strain theory, and the spring series–parallel model, this study derives the elastic stiffness calculation formulas for stud shear connectors and PBL shear connectors, respectively. The primary focus of this study was the single-layer stud–PBL composite shear connector within the steel–concrete composite section of bridge pylons. Embedded push-out tests were designed and conducted, comprising three main categories and eight subcategories. The load–slip curves for the three types of shear connectors were generated, and the stiffness calculation formula for the stud–PBL composite shear connector was verified through finite element analysis. The comparative push-out tests and finite element simulations demonstrate that the theoretical formula proposed in this study can effectively analyze the elastic stiffness of three types of shear connectors. The elastic stiffness of composite shear connectors can be regarded as the superposition of the elastic stiffness of studs and PBL shear connectors. Compared with single shear connectors, composite shear connectors exhibit superior elastic stiffness and shear resistance, meeting the application requirements of steel–concrete composite bridge pylons. The research findings provide a theoretical basis for the optimal design of shear connectors in large-span cable-stayed bridge composite pylons. Furthermore, the established formula has broad applicability.
Open AccessResearch on the Elastic Stiffness of Stud–PBL Composite Shear Connectors in Composite Bridge Pylons
The application of steel–concrete composite structures in the pylons of long-span cable-stayed bridges can effectively address the issue of insufficient structural stiffness. Shear connectors are critical load-transfer components in steel–concrete composite segments, where they are typically arranged to ensure coordinated force transmission between steel and concrete. The stud–PBL composite shear connector, as a novel type of connector, has been implemented in engineering practice. However, the collaborative load-bearing performance between studs and PBL connectors remains unclear. Most shear connectors operate within the elastic stage during service, making their elastic stiffness a key evaluation metric. Based on the Winkler elastic foundation beam theory, plane strain theory, and the spring series–parallel model, this study derives the elastic stiffness calculation formulas for stud shear connectors and PBL shear connectors, respectively. The primary focus of this study was the single-layer stud–PBL composite shear connector within the steel–concrete composite section of bridge pylons. Embedded push-out tests were designed and conducted, comprising three main categories and eight subcategories. The load–slip curves for the three types of shear connectors were generated, and the stiffness calculation formula for the stud–PBL composite shear connector was verified through finite element analysis. The comparative push-out tests and finite element simulations demonstrate that the theoretical formula proposed in this study can effectively analyze the elastic stiffness of three types of shear connectors. The elastic stiffness of composite shear connectors can be regarded as the superposition of the elastic stiffness of studs and PBL shear connectors. Compared with single shear connectors, composite shear connectors exhibit superior elastic stiffness and shear resistance, meeting the application requirements of steel–concrete composite bridge pylons. The research findings provide a theoretical basis for the optimal design of shear connectors in large-span cable-stayed bridge composite pylons. Furthermore, the established formula has broad applicability.
- Open Access
Experimental and Numerical Investigation of Post-Weld Heat Treatment on Residual Stress Relaxation in Orthotropic Steel Decks Welding
Orthotropic steel decks (OSDs) serve as critical load-bearing components in long-span steel bridges, but high-amplitude welding residual stresses (WRSs) generated during the welding process pose significant threats to structural integrity. To mitigate these stresses, post-weld heat treatment (PWHT) has emerged as a promising technique. This investigation first establishes a semi-structural thermo-elasto-plastic finite element model of the Deck-U-rib-Diaphragm system with a six-pass welding sequence. The temperature field is modeled via a double-ellipsoidal heat source and birth–death element approach. Subsequently, thermo-mechanical coupling analysis is conducted to investigate the distribution characteristics of Von Mises residual stresses. The stress relief effect of PWHT is then explored by comparing different holding temperatures (T) and holding times (t), achieving a balance between stress reduction effectiveness and economic efficiency, when T = 550 °C and t = 40 min. Finally, full-scale experimental tests are designed, and the hole-drilling method is utilized to validate the numerical simulation results. This research provides valuable insights for the design of PWHT processes for OSDs.
Open AccessExperimental and Numerical Investigation of Post-Weld Heat Treatment on Residual Stress Relaxation in Orthotropic Steel Decks Welding
Orthotropic steel decks (OSDs) serve as critical load-bearing components in long-span steel bridges, but high-amplitude welding residual stresses (WRSs) generated during the welding process pose significant threats to structural integrity. To mitigate these stresses, post-weld heat treatment (PWHT) has emerged as a promising technique. This investigation first establishes a semi-structural thermo-elasto-plastic finite element model of the Deck-U-rib-Diaphragm system with a six-pass welding sequence. The temperature field is modeled via a double-ellipsoidal heat source and birth–death element approach. Subsequently, thermo-mechanical coupling analysis is conducted to investigate the distribution characteristics of Von Mises residual stresses. The stress relief effect of PWHT is then explored by comparing different holding temperatures (T) and holding times (t), achieving a balance between stress reduction effectiveness and economic efficiency, when T = 550 °C and t = 40 min. Finally, full-scale experimental tests are designed, and the hole-drilling method is utilized to validate the numerical simulation results. This research provides valuable insights for the design of PWHT processes for OSDs.
- Open Access
Experimental Study on the Force Mechanism of Internal Composite Connectors in Steel–Concrete Composite Sections of Bridge Towers
Current research on the stress mechanisms of composite connectors within steel–concrete structures of bridge towers is sparse, and there is a lack of established experimental methods and finite element modeling techniques for studying these mechanisms. This study focuses on a specific type of composite shear connector within the steel–concrete section of the Shunde Bridge tower. By employing proposed experimental methods and finite element model analysis, this research examines the load–slip curves and stress distribution of these shear connectors. It aims to elucidate the stress mechanisms and mechanical relationships between the composite connectors and the individual perforated plate connectors and shear stud connectors that comprise them. The results demonstrate that the proposed experimental methods and finite element modeling approaches effectively analyze the stress mechanisms of composite connectors, revealing that the ultimate load-bearing capacity and elastic stiffness of the composite connectors are approximately the sum of those of the individual connectors configured in parallel; The mechanical performance of the composite connectors in the steel–concrete section of the bridge tower is approximately the additive sum of the mechanical performances of the individual connectors comprising them. By comparing the experimentally measured load–slip curves with those calculated from the finite element models, it validates the modeling approach of the finite element model, and the material parameters established through material characteristic tests and literature review are reasonable.
Open AccessExperimental Study on the Force Mechanism of Internal Composite Connectors in Steel–Concrete Composite Sections of Bridge Towers
Current research on the stress mechanisms of composite connectors within steel–concrete structures of bridge towers is sparse, and there is a lack of established experimental methods and finite element modeling techniques for studying these mechanisms. This study focuses on a specific type of composite shear connector within the steel–concrete section of the Shunde Bridge tower. By employing proposed experimental methods and finite element model analysis, this research examines the load–slip curves and stress distribution of these shear connectors. It aims to elucidate the stress mechanisms and mechanical relationships between the composite connectors and the individual perforated plate connectors and shear stud connectors that comprise them. The results demonstrate that the proposed experimental methods and finite element modeling approaches effectively analyze the stress mechanisms of composite connectors, revealing that the ultimate load-bearing capacity and elastic stiffness of the composite connectors are approximately the sum of those of the individual connectors configured in parallel; The mechanical performance of the composite connectors in the steel–concrete section of the bridge tower is approximately the additive sum of the mechanical performances of the individual connectors comprising them. By comparing the experimentally measured load–slip curves with those calculated from the finite element models, it validates the modeling approach of the finite element model, and the material parameters established through material characteristic tests and literature review are reasonable.
- Open Access
- 1 November 2024
- Published by MDPI AG in Journal of Composites Science
- Vol. 8 (11) , 450
Mechanical Properties of Natural Jute Fiber-Reinforced Geopolymer Concrete: Effects of Various Lengths and Volume Fractions
Enhancing the fracture strength and ductility of concrete through the incorporation of various types of synthetic and natural fibers with varying textures and contents remains challenging. Natural fibers, being versatile and eco-friendly construction materials, can be an excellent alternative to synthetic fibers. However, studies on natural fiber-reinforced (especially through the incorporation of jute fibers) novel composites like geopolymer binders remain deficient. Thus, the effects of various lengths (15, 25 and 35 mm) and volume contents (0.10, 0.20, 0.30, 0.40, 0.50, 0.60, and 0.70%) of natural jute fibers on the mechanical performance of fiber-reinforced geopolymer concrete were studied. The results revealed that jute fiber reinforcement remarkably affected the workability, compressive strength, fracture strengths, water absorption and microstructure properties of the proposed geopolymer concretes. Increasing the fiber length and volume fractions in the geopolymer matrix lowered the slump values and workability and increased the compressive strength. The specimen prepared with a fiber length of 35 mm and volume fractions of 0.70% displayed the lowest slump value (28 mm) and highest compressive strength (31.5 MPa) at 28 days. In addition, the specimens made with fiber volume fractions of 0.10, 0.20, 0.30, and 0.40% showed a significant improvement in the splitting tensile and flexural strengths. However, increasing the volume of the jute fibers up to 0.50% led to a slight drop in the fracture strength of the geopolymers. The specimens prepared with a length of 25 mm and a volume of 0.40% achieved the highest enhancement of splitting tensile strength (18.7%) and flexural strength (29.1%) at 28 days. In short, sustainable geopolymer concrete with high fracture performance can be obtained by incorporating natural jute fibers, leading to practical applications in the construction sector. The proposed green concrete may enable a reduction in solid waste, thus promoting a more sustainable concrete industry.
- 1 November 2024
- Published by MDPI AG in Journal of Composites Science
- Vol. 8 (11) , 450
Open AccessMechanical Properties of Natural Jute Fiber-Reinforced Geopolymer Concrete: Effects of Various Lengths and Volume Fractions
Enhancing the fracture strength and ductility of concrete through the incorporation of various types of synthetic and natural fibers with varying textures and contents remains challenging. Natural fibers, being versatile and eco-friendly construction materials, can be an excellent alternative to synthetic fibers. However, studies on natural fiber-reinforced (especially through the incorporation of jute fibers) novel composites like geopolymer binders remain deficient. Thus, the effects of various lengths (15, 25 and 35 mm) and volume contents (0.10, 0.20, 0.30, 0.40, 0.50, 0.60, and 0.70%) of natural jute fibers on the mechanical performance of fiber-reinforced geopolymer concrete were studied. The results revealed that jute fiber reinforcement remarkably affected the workability, compressive strength, fracture strengths, water absorption and microstructure properties of the proposed geopolymer concretes. Increasing the fiber length and volume fractions in the geopolymer matrix lowered the slump values and workability and increased the compressive strength. The specimen prepared with a fiber length of 35 mm and volume fractions of 0.70% displayed the lowest slump value (28 mm) and highest compressive strength (31.5 MPa) at 28 days. In addition, the specimens made with fiber volume fractions of 0.10, 0.20, 0.30, and 0.40% showed a significant improvement in the splitting tensile and flexural strengths. However, increasing the volume of the jute fibers up to 0.50% led to a slight drop in the fracture strength of the geopolymers. The specimens prepared with a length of 25 mm and a volume of 0.40% achieved the highest enhancement of splitting tensile strength (18.7%) and flexural strength (29.1%) at 28 days. In short, sustainable geopolymer concrete with high fracture performance can be obtained by incorporating natural jute fibers, leading to practical applications in the construction sector. The proposed green concrete may enable a reduction in solid waste, thus promoting a more sustainable concrete industry.
- 20 June 2014
- Published by Springer Nature in Science China Physics, Mechanics & Astronomy
- Vol. 57 (8) , 1536-1546
Geometrically nonlinear dynamic response of stiffened plates with moving boundary conditions
- 20 June 2014
- Published by Springer Nature in Science China Physics, Mechanics & Astronomy
- Vol. 57 (8) , 1536-1546
Geometrically nonlinear dynamic response of stiffened plates with moving boundary conditions
- 1 October 2013
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 16 (10) , 1719-1727
Experimental Study on the Welding Residual Stresses of Integral Joint Using Full-Scale Joint Model of a Steel Truss Bridge
In order to study the residual stress distribution of the welded integral joint of steel truss bridge, a full-scale model was fabricated with the same welding process, same material as the real bridge in the bridge workshop. The residual stress state and distributions of residual stresses in the full-scale model were measured using blind-hole strain-gage method. The tested results show that high residual stress is caused during the welding process and the maximum tensile residual stress may reach the yield strength of the steel. Longitudinal tensile residual stress appears in the regions near the welding bead and changes to compressive stress at a certain distance from the welding bead, with the maximum tensile residual stress being in the centre of the welding bead. In butt-welding between two plates with different thicknesses, the value of welding residual stress in the thinner plate is lower than that of the thicker one. The results presented in this paper would be useful as references for developing measures of reducing the residual stress of integral joint in the fabrication of a real bridge.
- 1 October 2013
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 16 (10) , 1719-1727
Experimental Study on the Welding Residual Stresses of Integral Joint Using Full-Scale Joint Model of a Steel Truss Bridge
In order to study the residual stress distribution of the welded integral joint of steel truss bridge, a full-scale model was fabricated with the same welding process, same material as the real bridge in the bridge workshop. The residual stress state and distributions of residual stresses in the full-scale model were measured using blind-hole strain-gage method. The tested results show that high residual stress is caused during the welding process and the maximum tensile residual stress may reach the yield strength of the steel. Longitudinal tensile residual stress appears in the regions near the welding bead and changes to compressive stress at a certain distance from the welding bead, with the maximum tensile residual stress being in the centre of the welding bead. In butt-welding between two plates with different thicknesses, the value of welding residual stress in the thinner plate is lower than that of the thicker one. The results presented in this paper would be useful as references for developing measures of reducing the residual stress of integral joint in the fabrication of a real bridge.
- 24 July 2012
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 70 (1) , 649
Erratum to: Nonlinear dynamic response of a stiffened plate with four edges clamped under primary resonance excitation
- 24 July 2012
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 70 (1) , 649
Erratum to: Nonlinear dynamic response of a stiffened plate with four edges clamped under primary resonance excitation
- 1 July 2012
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 15 (7) , 1167-1179
A New Approach for the Free Vibration of Steel Bridge Deck with Stiffeners
Based on energy principle, the free vibration of orthotropic steel bridge deck is investigated. The orthotropic steel bridge deck considered to be a stiffened plate. Both longitudinal stiffeners and transverse diaphragms are considered to be beam elements according to the equivalent principle of mass and rigidity. Besides, the plate is analyzed according to classic thin plate theory. The mode shape functions are expressed by the product of two independent beam functions. During the derivation of frequency equation, the lateral flexural effect of both the plate and stiffeners is considered. Besides, the eccentricity and torsion of stiffeners are taken into consideration, as well as the membrane strain energy of the plate. The results of the present approach are validated by the published example. At last, a stiffened plate with three classical boundary conditions is studied. The results show good agreement with the FE software ANSYS. Besides, it is observed that the eccentricity of stiffeners has a greater influence on lower frequencies than the higher, and the dynamic rigidity of stiffened plate can be increased efficiently by increasing the thickness of longitudinal stiffeners or reducing the distance between neighboring stiffeners. But the latter is more efficient.
- 1 July 2012
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 15 (7) , 1167-1179
A New Approach for the Free Vibration of Steel Bridge Deck with Stiffeners
Based on energy principle, the free vibration of orthotropic steel bridge deck is investigated. The orthotropic steel bridge deck considered to be a stiffened plate. Both longitudinal stiffeners and transverse diaphragms are considered to be beam elements according to the equivalent principle of mass and rigidity. Besides, the plate is analyzed according to classic thin plate theory. The mode shape functions are expressed by the product of two independent beam functions. During the derivation of frequency equation, the lateral flexural effect of both the plate and stiffeners is considered. Besides, the eccentricity and torsion of stiffeners are taken into consideration, as well as the membrane strain energy of the plate. The results of the present approach are validated by the published example. At last, a stiffened plate with three classical boundary conditions is studied. The results show good agreement with the FE software ANSYS. Besides, it is observed that the eccentricity of stiffeners has a greater influence on lower frequencies than the higher, and the dynamic rigidity of stiffened plate can be increased efficiently by increasing the thickness of longitudinal stiffeners or reducing the distance between neighboring stiffeners. But the latter is more efficient.
- 9 June 2012
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 70 (1) , 627-648
Nonlinear dynamic response of a stiffened plate with four edges clamped under primary resonance excitation
- 9 June 2012
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 70 (1) , 627-648
Nonlinear dynamic response of a stiffened plate with four edges clamped under primary resonance excitation