Hartmut Schlenz
Hartmut Schlenz has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Olivier Guillon
Forschungszentrum Jülich GmbH Institute of Energy Materials and Devices: Materials Synthesis and Processing (IMD‐2) Jülich Germany
4 shared publications - Alejandro A. Franco
UMR CNRS, Université de Picardie Jules Verne, 15, rue Baudelocque, Amiens Cedex, France, 80039
3 shared publications - Norbert Heribert Menzler
Forschungszentrum Jülich GmbH
3 shared publications - Dirk Bosbach
Forschungszentrum Julich, Unknown, Julich, Germany [DE
2 shared publications - Mohammed Alabdali
Université de Picardie Jules Verne
2 shared publications Olivier Guillon
2 shared publications
Latest Publications
- Open Access
- 14 June 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 688
Deep learning-enhanced physical modelling for tape-casting slurry microstructures of solid oxide cell substrates
- 14 June 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 688
Open AccessDeep learning-enhanced physical modelling for tape-casting slurry microstructures of solid oxide cell substrates
- Open Access
- 29 January 2026
- Published by Elsevier in Energy and AI
- Vol. 24
Data-driven machine learning modelling for the manufacturing of the fuel electrode support in solid oxide cells
- 29 January 2026
- Published by Elsevier in Energy and AI
- Vol. 24
Open AccessData-driven machine learning modelling for the manufacturing of the fuel electrode support in solid oxide cells
- Open Access
- 14 November 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 662
Coarse-grained physics-based modelling for tape casting of fuel-electrode supports in Solid Oxide Cells
- 14 November 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 662
Open AccessCoarse-grained physics-based modelling for tape casting of fuel-electrode supports in Solid Oxide Cells
- Open Access
- 18 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Coarse-Grained Physics-based Modelling for Tape Casting of Fuel-Electrode Supports in Solid Oxide Cells
Optimising the tape casting process for fabricating NiO/YSZ cermet-based fuel-electrode supports in Solid Oxide Cells remains a resource-intensive challenge. Improving the green tape properties is often reliant on trial-and-error procedures or proprietary knowledge that is inaccessible to the broader scientific community. In this work, we use computational simulations as a powerful tool to link the manufacturing process to the final microstructure of the tape. A novel three-dimensional physics-based model is presented to simulate the slip preparation and the homogeneous drying process of the tape casting, producing the fuel electrode support in Solid Oxide Cells. Our model is well-calibrated to experimental data, and we investigate the dried microstructure of the simulated support.
- 18 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessCoarse-Grained Physics-based Modelling for Tape Casting of Fuel-Electrode Supports in Solid Oxide Cells
Optimising the tape casting process for fabricating NiO/YSZ cermet-based fuel-electrode supports in Solid Oxide Cells remains a resource-intensive challenge. Improving the green tape properties is often reliant on trial-and-error procedures or proprietary knowledge that is inaccessible to the broader scientific community. In this work, we use computational simulations as a powerful tool to link the manufacturing process to the final microstructure of the tape. A novel three-dimensional physics-based model is presented to simulate the slip preparation and the homogeneous drying process of the tape casting, producing the fuel electrode support in Solid Oxide Cells. Our model is well-calibrated to experimental data, and we investigate the dried microstructure of the simulated support.
- Open Access
- 20 October 2023
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 27, 3531-3538
Promoting densification and grain growth of BaCe0.65Zr0.2Y0.15O3-
- 20 October 2023
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 27, 3531-3538
Open AccessPromoting densification and grain growth of BaCe0.65Zr0.2Y0.15O3-
- Open Access
Applications of Machine Learning to the Study of Crystalline Materials
This Special Issue, “Applications of Machine Learning to the Study of Crystalline Materials”, is a collection of seven original articles published in 2021 and 2022 and dedicated to applications of machine learning in materials research
Open AccessApplications of Machine Learning to the Study of Crystalline Materials
This Special Issue, “Applications of Machine Learning to the Study of Crystalline Materials”, is a collection of seven original articles published in 2021 and 2022 and dedicated to applications of machine learning in materials research
- Open Access
The Development of New Perovskite-Type Oxygen Transport Membranes Using Machine Learning
The aim of this work is to predict suitable chemical compositions for the development of new ceramic oxygen gas separation membranes, avoiding doping with toxic cobalt or expensive rare earths. For this purpose, we have chosen the system Sr1−xBax(Ti1−y−zVyFez)O3−δ (cubic perovskite-type phases). We have evaluated available experimental data, determined missing crystallographic information using bond-valence modeling and programmed a Python code to be able to generate training data sets for property predictions using machine learning. Indeed, suitable compositions of cubic perovskite-type phases can be predicted in this way, allowing for larger electronic conductivities of up to σe = 1.6 S/cm and oxygen conductivities of up to σi = 0.008 S/cm at T = 1173 K and an oxygen partial pressure pO2 = 10−15 bar, thus enabling practical applications.
Open AccessThe Development of New Perovskite-Type Oxygen Transport Membranes Using Machine Learning
The aim of this work is to predict suitable chemical compositions for the development of new ceramic oxygen gas separation membranes, avoiding doping with toxic cobalt or expensive rare earths. For this purpose, we have chosen the system Sr1−xBax(Ti1−y−zVyFez)O3−δ (cubic perovskite-type phases). We have evaluated available experimental data, determined missing crystallographic information using bond-valence modeling and programmed a Python code to be able to generate training data sets for property predictions using machine learning. Indeed, suitable compositions of cubic perovskite-type phases can be predicted in this way, allowing for larger electronic conductivities of up to σe = 1.6 S/cm and oxygen conductivities of up to σi = 0.008 S/cm at T = 1173 K and an oxygen partial pressure pO2 = 10−15 bar, thus enabling practical applications.
- Open Access
Monazite-Type SmPO4 as Potential Nuclear Waste Form: Insights into Radiation Effects from Ion-Beam Irradiation and Atomistic Simulations
Single-phase monazite-type ceramics are considered as potential host matrices for the conditioning of separated plutonium and minor actinides. Sm-orthophosphates were synthesised and their behaviour under irradiation was investigated with respect to their long-term performance in the repository environment. Sintered SmPO4 pellets and thin lamellae were irradiated with 1, 3.5, and 7 MeV Au ions, up to fluences of 5.1 × 1014 ions cm−2 to simulate ballistic effects of recoiling nuclei resulting from α-decay of incorporated actinides. Threshold displacement energies for monazite-type SmPO4 subsequently used in SRIM/TRIM simulations were derived from atomistic simulations. Raman spectra obtained from irradiated lamellae revealed vast amorphisation at the highest fluence used, although local annealing effects were observed. The broadened, but still discernible, band of the symmetrical stretching vibration in SmPO4 and the negligible increase in P–O bond lengths suggest that amorphisation of monazite is mainly due to a breaking of Ln–O bonds. PO4 groups show structural disorder in the local environment but seem to behave as tight units. Annealing effects observed during the irradiation experiment and the distinctively lower dose rates incurred in actinide bearing waste forms and potential α-radiation-induced annealing effects indicate that SmPO4-based waste forms have a high potential for withstanding amorphisation.
Open AccessMonazite-Type SmPO4 as Potential Nuclear Waste Form: Insights into Radiation Effects from Ion-Beam Irradiation and Atomistic Simulations
Single-phase monazite-type ceramics are considered as potential host matrices for the conditioning of separated plutonium and minor actinides. Sm-orthophosphates were synthesised and their behaviour under irradiation was investigated with respect to their long-term performance in the repository environment. Sintered SmPO4 pellets and thin lamellae were irradiated with 1, 3.5, and 7 MeV Au ions, up to fluences of 5.1 × 1014 ions cm−2 to simulate ballistic effects of recoiling nuclei resulting from α-decay of incorporated actinides. Threshold displacement energies for monazite-type SmPO4 subsequently used in SRIM/TRIM simulations were derived from atomistic simulations. Raman spectra obtained from irradiated lamellae revealed vast amorphisation at the highest fluence used, although local annealing effects were observed. The broadened, but still discernible, band of the symmetrical stretching vibration in SmPO4 and the negligible increase in P–O bond lengths suggest that amorphisation of monazite is mainly due to a breaking of Ln–O bonds. PO4 groups show structural disorder in the local environment but seem to behave as tight units. Annealing effects observed during the irradiation experiment and the distinctively lower dose rates incurred in actinide bearing waste forms and potential α-radiation-induced annealing effects indicate that SmPO4-based waste forms have a high potential for withstanding amorphisation.
- 24 April 2014
- Published by Wiley in Journal of Computational Chemistry
- Vol. 35 (18) , 1339-1346
Performance of DFT+U method for prediction of structural and thermodynamic parameters of monazite‐type ceramics
We performed a density functional theory (DFT) study of the monazite‐type ceramics using DFT+U method, where the Hubbard U parameters are derived ab initio, with the main goal in testing the predictive power of this computational method for modeling of f‐electron materials that are of interest in nuclear waste management. We show that DFT+U approach with PBEsol as the exchange‐correlation functional significantly improves description of structures and thermodynamic parameters of lanthanide‐bearing oxides and monazites over commonly used standard DFT (PBE) approach. We found that it is essential to use the Hubbard U parameter derived for a given element and a given structure to reproduce the structural parameters of the measured materials. We obtained exceptionally good description of the structural parameters with U parameter derived using the linear response approach of Cococcioni and de Gironcoli (Phys. Rev. B 2005, 71, 035105). This shows that affordable methods, such as DFT+U with a clever choice of exchange‐correlation functional and the Hubbard U parameter can lead to a good description of f‐electron materials.
- 24 April 2014
- Published by Wiley in Journal of Computational Chemistry
- Vol. 35 (18) , 1339-1346
Performance of DFT+U method for prediction of structural and thermodynamic parameters of monazite‐type ceramics
We performed a density functional theory (DFT) study of the monazite‐type ceramics using DFT+U method, where the Hubbard U parameters are derived ab initio, with the main goal in testing the predictive power of this computational method for modeling of f‐electron materials that are of interest in nuclear waste management. We show that DFT+U approach with PBEsol as the exchange‐correlation functional significantly improves description of structures and thermodynamic parameters of lanthanide‐bearing oxides and monazites over commonly used standard DFT (PBE) approach. We found that it is essential to use the Hubbard U parameter derived for a given element and a given structure to reproduce the structural parameters of the measured materials. We obtained exceptionally good description of the structural parameters with U parameter derived using the linear response approach of Cococcioni and de Gironcoli (Phys. Rev. B 2005, 71, 035105). This shows that affordable methods, such as DFT+U with a clever choice of exchange‐correlation functional and the Hubbard U parameter can lead to a good description of f‐electron materials.
- 1 March 2013
- Published by Walter de Gruyter GmbH in Zeitschrift für Kristallographie - Crystalline Materials
- Vol. 228 (3) , 113-123
Monazite as a suitable actinide waste form
The conditioning of radioactive waste from nuclear power plants and in some countries even of weapons plutonium is an important issue for science and society. Therefore the research on appropriate matrices for the immobilization of fission products and actinides is of great interest. Beyond the widely used borosilicate glasses, ceramics are promising materials for the conditioning of actinides like U, Np, Pu, Am, and Cm. Monazite-type ceramics with general composition LnPO4 (Ln = La to Gd) and solid solutions of monazite with cheralite or huttonite represent important materials in this field. Monazite appears to be a promising candidate material, especially because of its outstanding properties regarding radiation resistance and chemical durability. This article summarizes the most recent results concerning the characterization of monazite and respective solid solutions and the study of their chemical, thermal, physical and structural properties. The aim is to demonstrate the suitability of monazite as a secure and reliable waste form for actinides.
- 1 March 2013
- Published by Walter de Gruyter GmbH in Zeitschrift für Kristallographie - Crystalline Materials
- Vol. 228 (3) , 113-123
Monazite as a suitable actinide waste form
The conditioning of radioactive waste from nuclear power plants and in some countries even of weapons plutonium is an important issue for science and society. Therefore the research on appropriate matrices for the immobilization of fission products and actinides is of great interest. Beyond the widely used borosilicate glasses, ceramics are promising materials for the conditioning of actinides like U, Np, Pu, Am, and Cm. Monazite-type ceramics with general composition LnPO4 (Ln = La to Gd) and solid solutions of monazite with cheralite or huttonite represent important materials in this field. Monazite appears to be a promising candidate material, especially because of its outstanding properties regarding radiation resistance and chemical durability. This article summarizes the most recent results concerning the characterization of monazite and respective solid solutions and the study of their chemical, thermal, physical and structural properties. The aim is to demonstrate the suitability of monazite as a secure and reliable waste form for actinides.