Gerald Morrison
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gerald Morrison has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Abhay Patil
Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843
8 shared publications - Abhay Patil
Mechanical Engineering Department, Texas A&M University, College Station, TX 77843
4 shared publications - Adolfo Delgado
TEES Turbomachinery Laboratory, J. Mike Walker '66 Department of Mechanical Engineering, Texas A&M University , College Station, TX 77843
3 shared publications - Peng Liu
Turbomachinery Laboratory, Texas A&M University, College Station, TX 77843
2 shared publications - Rahul Agarwal
Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, Kharagpur, 721302, India
2 shared publications - Wenjie Yin
Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843
2 shared publications
Latest Publications
- Open Access
- 16 July 2021
- Published by ASME International
An Experimental Investigation on the Erosion of a Helico-Axial Pump With Gas Presence
*Electrical submersible pump (ESP) technology has been widely applied in the oil and gas industry due to its high productivity. However, erosion always causes the reduction of productivity and sometimes even the failure of an ESP system. This study explores the effect of gas presence on erosion mechanism on an ESP which is composed of 4 stages of Helico-Axial Pump (HAP). A 200-hour
- 16 July 2021
- Published by ASME International
Open AccessAn Experimental Investigation on the Erosion of a Helico-Axial Pump With Gas Presence
*Electrical submersible pump (ESP) technology has been widely applied in the oil and gas industry due to its high productivity. However, erosion always causes the reduction of productivity and sometimes even the failure of an ESP system. This study explores the effect of gas presence on erosion mechanism on an ESP which is composed of 4 stages of Helico-Axial Pump (HAP). A 200-hour
- 3 February 2020
- Published by ASME International in Journal of Fluids Engineering
- Vol. 142 (5)
Effect of Leakage Flow Path Wear on Axial Thrust in Downhole Electrical Submersible Pump Unit
Subsea production fluid is quite often characterized by the presence of frac sand, which causes wear within the pump, and alters the performance envelop. One of the design parameters critically affecting reliability is the thrust load generated by an impeller. The change in thrust load due to the erosion of the pump stages is not completely understood, and no relationship exists to foresee these reactive forces due to the complexity involved in predicting the flow characteristics. The purpose of this study is to understand the change in axial thrust due to commonly encountered wear mechanisms across the pump section especially wear across stage clearance seals. Based on in-house erosion testing of a mixed flow pump, three mesh models were built with each representing the pump condition at three different time intervals, namely, 0 h, 52 h, and 117 h of the total test time. The pump numerical models were validated using performance data collected from experimental testing. Axial thrust was found to increase with an increase in wear rate across stage seals. Since the increased clearance causes head degradation as well as an increase in thrust, the relationship of this head degradation is correlated with a change in thrust to further expand the affinity laws.
- 3 February 2020
- Published by ASME International in Journal of Fluids Engineering
- Vol. 142 (5)
Effect of Leakage Flow Path Wear on Axial Thrust in Downhole Electrical Submersible Pump Unit
Subsea production fluid is quite often characterized by the presence of frac sand, which causes wear within the pump, and alters the performance envelop. One of the design parameters critically affecting reliability is the thrust load generated by an impeller. The change in thrust load due to the erosion of the pump stages is not completely understood, and no relationship exists to foresee these reactive forces due to the complexity involved in predicting the flow characteristics. The purpose of this study is to understand the change in axial thrust due to commonly encountered wear mechanisms across the pump section especially wear across stage clearance seals. Based on in-house erosion testing of a mixed flow pump, three mesh models were built with each representing the pump condition at three different time intervals, namely, 0 h, 52 h, and 117 h of the total test time. The pump numerical models were validated using performance data collected from experimental testing. Axial thrust was found to increase with an increase in wear rate across stage seals. Since the increased clearance causes head degradation as well as an increase in thrust, the relationship of this head degradation is correlated with a change in thrust to further expand the affinity laws.
- 16 October 2019
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 141 (12) , 1-25
Experimental and Analytical Investigation of a Novel Multistage Twin-Screw Pump
The performance of a multistage electrical submersible twin-screw pump (ESTSP) was evaluated under different operating conditions. The effect of working fluid, differential pressure, gas volumetric fraction (GVF), and pump rotating speed on the behavior of the ESTSP has been studied. Mineral oil and water were selected as test liquids. The pump was tested with a maximum differential pressure of 1000 psig. The GVF varies from 0% to 85%. The flow rate capacity and the volumetric efficiency were investigated in this research. An existing model to predict leakage flow of the single stage twin-screw pump is improved by extending the application for the multistage pumps. The model shows good agreement with experimental data under various operating conditions.
- 16 October 2019
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 141 (12) , 1-25
Experimental and Analytical Investigation of a Novel Multistage Twin-Screw Pump
The performance of a multistage electrical submersible twin-screw pump (ESTSP) was evaluated under different operating conditions. The effect of working fluid, differential pressure, gas volumetric fraction (GVF), and pump rotating speed on the behavior of the ESTSP has been studied. Mineral oil and water were selected as test liquids. The pump was tested with a maximum differential pressure of 1000 psig. The GVF varies from 0% to 85%. The flow rate capacity and the volumetric efficiency were investigated in this research. An existing model to predict leakage flow of the single stage twin-screw pump is improved by extending the application for the multistage pumps. The model shows good agreement with experimental data under various operating conditions.
- 16 October 2019
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 142 (3) , 1-33
Efficiency Prediction of Centrifugal Pump Using the Modified Affinity Laws
This research is a continuation of efforts aimed at establishing the modified affinity laws for viscosity to predict the pump performance directly from a plot in terms of dimensionless numbers, i.e., flow coefficient, Reynolds number, head coefficient, and efficiency. The group has earlier proposed modified head coefficient affinity law. This work proposes and validates a similar efficiency plot that completes the set of modified affinity laws that include all the input and output parameters for a specific pump design and type. A wide range of viscosities and flow rates are considered for CFD analysis to have a comprehensive set of data that includes enough data points to comment on both the laminar and turbulent flow cases categorized based on the hydraulic Reynolds number (2300). Initial analysis shows some inconsistency based on laminar versus turbulent simulation model selection which is addressed in the latter part of this work. In general, two curves can be constructed for laminar and turbulent flow cases. These curves have different axes parameters (exponents of the dimensionless numbers) depending on the plot being for a laminar or a turbulent flow case. Validation with established experimental data shows good agreement in terms of the variation of axes parameters (their exponents) depending on the pump type for a single suction impeller and a double suction impeller pump. The distinction between laminar and turbulent flow cases is found to be applicable to established experimental data as well.
- 16 October 2019
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 142 (3) , 1-33
Efficiency Prediction of Centrifugal Pump Using the Modified Affinity Laws
This research is a continuation of efforts aimed at establishing the modified affinity laws for viscosity to predict the pump performance directly from a plot in terms of dimensionless numbers, i.e., flow coefficient, Reynolds number, head coefficient, and efficiency. The group has earlier proposed modified head coefficient affinity law. This work proposes and validates a similar efficiency plot that completes the set of modified affinity laws that include all the input and output parameters for a specific pump design and type. A wide range of viscosities and flow rates are considered for CFD analysis to have a comprehensive set of data that includes enough data points to comment on both the laminar and turbulent flow cases categorized based on the hydraulic Reynolds number (2300). Initial analysis shows some inconsistency based on laminar versus turbulent simulation model selection which is addressed in the latter part of this work. In general, two curves can be constructed for laminar and turbulent flow cases. These curves have different axes parameters (exponents of the dimensionless numbers) depending on the plot being for a laminar or a turbulent flow case. Validation with established experimental data shows good agreement in terms of the variation of axes parameters (their exponents) depending on the pump type for a single suction impeller and a double suction impeller pump. The distinction between laminar and turbulent flow cases is found to be applicable to established experimental data as well.
- Open Access
- 25 July 2019
- Published by MDPI AG in International Journal of Turbomachinery, Propulsion and Power
- Vol. 4 (3) , 22
Performance Evaluation and Dimensional Analysis of Multistage Helicoaxial Pump for Two-Phase Flow
A four stage helicoaxial pump was tested under varying operating conditions. A range of inlet pressures, rotational speeds (3000, 3600 rpm), and gas void fractures (GVFs) were considered for two fluid viscosities. The head developed and power input to run the pump were recorded. Head, power input and efficiency decrease as the GVF increases with best efficiency point (BEP) moving towards lower flow rate conditions. Dimensional analysis was conducted to evaluate the applicability of current affinity laws to the two-phase flow performance of the pump under consideration. Dimensionless head coefficient and power coefficients were defined for two-phase flow, considering the homogeneity in the two-phase fluid properties. Deviations in the two-phase affinity coefficients from the common law curve increases with GVF. To bridge this gap, a new correlation is proposed with a revised flow coefficient that allows all the head coefficient data to collapse on a single line with a greater degree of accuracy.
- 25 July 2019
- Published by MDPI AG in International Journal of Turbomachinery, Propulsion and Power
- Vol. 4 (3) , 22
Open AccessPerformance Evaluation and Dimensional Analysis of Multistage Helicoaxial Pump for Two-Phase Flow
A four stage helicoaxial pump was tested under varying operating conditions. A range of inlet pressures, rotational speeds (3000, 3600 rpm), and gas void fractures (GVFs) were considered for two fluid viscosities. The head developed and power input to run the pump were recorded. Head, power input and efficiency decrease as the GVF increases with best efficiency point (BEP) moving towards lower flow rate conditions. Dimensional analysis was conducted to evaluate the applicability of current affinity laws to the two-phase flow performance of the pump under consideration. Dimensionless head coefficient and power coefficients were defined for two-phase flow, considering the homogeneity in the two-phase fluid properties. Deviations in the two-phase affinity coefficients from the common law curve increases with GVF. To bridge this gap, a new correlation is proposed with a revised flow coefficient that allows all the head coefficient data to collapse on a single line with a greater degree of accuracy.
- 15 April 2019
- Published by ASME International in Journal of Fluids Engineering
- Vol. 141 (10)
Extending Classical Friction Loss Modeling to Predict the Viscous Performance of Pumping Devices
The affinity law modified for viscosity effects is further extended to include the power input and efficiency. The power input and efficiency data generated using computational fluid dynamics (CFD) are utilized to represent dimensionless power coefficient and efficiency for the pump under consideration. The goal of modifying the affinity laws for power input is achieved by developing a new relationship where the power coefficient is modified by multiplying it by rotational Reynolds number raised to a power Π*Rew−Pat. This new relationship is then represented as a function of a modified flow coefficient ф*Rew−Mo. All the data collapse onto a single curve for varying values of the exponents Morrison number (Mo) and Patil number (Pat). Pat is further characterized as a function of flow regime and specific speed. The method also holds true for efficiency prediction, however, with different values of Mo and Pat. The proposed method is validated by using data collected from published literature.
- 15 April 2019
- Published by ASME International in Journal of Fluids Engineering
- Vol. 141 (10)
Extending Classical Friction Loss Modeling to Predict the Viscous Performance of Pumping Devices
The affinity law modified for viscosity effects is further extended to include the power input and efficiency. The power input and efficiency data generated using computational fluid dynamics (CFD) are utilized to represent dimensionless power coefficient and efficiency for the pump under consideration. The goal of modifying the affinity laws for power input is achieved by developing a new relationship where the power coefficient is modified by multiplying it by rotational Reynolds number raised to a power Π*Rew−Pat. This new relationship is then represented as a function of a modified flow coefficient ф*Rew−Mo. All the data collapse onto a single curve for varying values of the exponents Morrison number (Mo) and Patil number (Pat). Pat is further characterized as a function of flow regime and specific speed. The method also holds true for efficiency prediction, however, with different values of Mo and Pat. The proposed method is validated by using data collected from published literature.
- 27 March 2019
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 141 (9) , 1-32
Predictive Erosion Model for Mixed Flow Centrifugal Pump
Electrical submersible pumps (ESPs) are widely used in upstream oil production. The presence of a low concentration solid phase, particle-laden flow, in the production fluid may cause severe damage in the internal sections of the pump which reduces its operating lifetime. To better understand the ESP pump's endurance, two different designs of commonly used mixed flow ESPs were studied numerically to determine the pump's flow behavior at its best efficiency point. Computational fluid dynamics (CFD) analysis was conducted on two stages of one design type of pump's primary flow path employing Eulerian–Granular scheme in ANSYS FLUENT. The key parameters affecting the erosion phenomena within the pump such as turbulence kinetic energy, local sand concentration, and near wall relative sand velocity were identified. The predictive erosion model applicable to pumps was developed by correlating the erosion key parameters with available experimental results. It is concluded that the use of an erosion model on the second design of ESP proves the model's versatility to predict the erosion on different designs of ESPs.
- 27 March 2019
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 141 (9) , 1-32
Predictive Erosion Model for Mixed Flow Centrifugal Pump
Electrical submersible pumps (ESPs) are widely used in upstream oil production. The presence of a low concentration solid phase, particle-laden flow, in the production fluid may cause severe damage in the internal sections of the pump which reduces its operating lifetime. To better understand the ESP pump's endurance, two different designs of commonly used mixed flow ESPs were studied numerically to determine the pump's flow behavior at its best efficiency point. Computational fluid dynamics (CFD) analysis was conducted on two stages of one design type of pump's primary flow path employing Eulerian–Granular scheme in ANSYS FLUENT. The key parameters affecting the erosion phenomena within the pump such as turbulence kinetic energy, local sand concentration, and near wall relative sand velocity were identified. The predictive erosion model applicable to pumps was developed by correlating the erosion key parameters with available experimental results. It is concluded that the use of an erosion model on the second design of ESP proves the model's versatility to predict the erosion on different designs of ESPs.
- 4 March 2019
- Published by ASME International in Journal of Tribology
- Vol. 141 (5) , 1-20
The Impact of Journal Bearing Wear on an Electric Submersible Pump in Two-Phase and Three-Phase Flow
Electric submersible pumps (ESPs) provide artificial lift within oil wells. ESPs commonly fail from mechanical vibrations that increase as bearing clearances increase from debris, gas, and liquid pumped through the ESP. In order to understand journal bearing wear within an ESP, three stages of a mixed flow electric submersible pump were subjected to hydraulic fracture sand slurry in water. One hundred seventeen hours were conducted with sand and water, followed by 68 h with air added at 15% inlet gas volume fraction. The journal bearings were severely worn by the end of testing, and pump vibrations increased with increased bearing clearances. Bearing vibrations and clearances became significantly larger than the impeller labyrinth seal vibrations and clearances, indicating that the labyrinth seals became the dominant rotor support once the bearings were worn. Adding air increased the wear and rotor vibration orbit variability. Rotor vibration orbits were entirely independent of gas void fraction by the end of testing, indicating that the lubricant composition no longer directly impacted vibrations. Fine axial cracks from heat checking were observed on the journal of the bearings. Results indicate that controlling journal bearing wear is a critical factor for increasing operating lifetimes. Alternative bearing geometry and materials should be investigated to prevent the occurrence of three-body abrasion, limit the resultant wear rate from three-body abrasion, and limit the damage from heat checking.
- 4 March 2019
- Published by ASME International in Journal of Tribology
- Vol. 141 (5) , 1-20
The Impact of Journal Bearing Wear on an Electric Submersible Pump in Two-Phase and Three-Phase Flow
Electric submersible pumps (ESPs) provide artificial lift within oil wells. ESPs commonly fail from mechanical vibrations that increase as bearing clearances increase from debris, gas, and liquid pumped through the ESP. In order to understand journal bearing wear within an ESP, three stages of a mixed flow electric submersible pump were subjected to hydraulic fracture sand slurry in water. One hundred seventeen hours were conducted with sand and water, followed by 68 h with air added at 15% inlet gas volume fraction. The journal bearings were severely worn by the end of testing, and pump vibrations increased with increased bearing clearances. Bearing vibrations and clearances became significantly larger than the impeller labyrinth seal vibrations and clearances, indicating that the labyrinth seals became the dominant rotor support once the bearings were worn. Adding air increased the wear and rotor vibration orbit variability. Rotor vibration orbits were entirely independent of gas void fraction by the end of testing, indicating that the lubricant composition no longer directly impacted vibrations. Fine axial cracks from heat checking were observed on the journal of the bearings. Results indicate that controlling journal bearing wear is a critical factor for increasing operating lifetimes. Alternative bearing geometry and materials should be investigated to prevent the occurrence of three-body abrasion, limit the resultant wear rate from three-body abrasion, and limit the damage from heat checking.
- 26 September 2018
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 141 (2) , 022003
Numerical Study on the First Stage Head Degradation in an Electrical Submersible Pump With Population Balance Model
Based on previous experiment result, an assumption is made to explain the abnormal head degradation in the first stage of an electrical submersible pump (ESP): the bubbles' breaking up and coalescence effect with compressibility is the main reason of this phenomenon. To investigate the head degradation problem inside the ESP, a series of numerical simulations are performed on the first stage of the split-vane impeller pump commonly employed for gas handling purpose. These three-dimensional transient Eulerian multiphase simulations are divided into two groups: one group with the traditional fixed bubble size method and the other with the ANSYS population balancing model (PBM) allowing the bubbles to break up and coalesce. The simulation result with the changing bubble size matches well with the experiment data, which supports the previous assumption. The flow field based on PBM simulation is visualized and analyzed. Also the separation of phases is discovered with large volume of gas accumulating at the suction side of the impeller trailing blades, which is also supported by experimental observation.
- 26 September 2018
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 141 (2) , 022003
Numerical Study on the First Stage Head Degradation in an Electrical Submersible Pump With Population Balance Model
Based on previous experiment result, an assumption is made to explain the abnormal head degradation in the first stage of an electrical submersible pump (ESP): the bubbles' breaking up and coalescence effect with compressibility is the main reason of this phenomenon. To investigate the head degradation problem inside the ESP, a series of numerical simulations are performed on the first stage of the split-vane impeller pump commonly employed for gas handling purpose. These three-dimensional transient Eulerian multiphase simulations are divided into two groups: one group with the traditional fixed bubble size method and the other with the ANSYS population balancing model (PBM) allowing the bubbles to break up and coalesce. The simulation result with the changing bubble size matches well with the experiment data, which supports the previous assumption. The flow field based on PBM simulation is visualized and analyzed. Also the separation of phases is discovered with large volume of gas accumulating at the suction side of the impeller trailing blades, which is also supported by experimental observation.
- 21 September 2018
- Published by ASME International in Journal of Fluids Engineering
- Vol. 141 (2)
Affinity Law Modified to Predict the Pump Head Performance for Different Viscosities Using the Morrison Number
The goal of this study is to provide pump users a simple means to predict a pump's performance change due to changing fluid viscosity. During the initial investigation, it has been demonstrated that pump performance can be represented in terms of the head coefficient, flow coefficient, and rotational Reynolds number with the head coefficient data for all viscosities falling on the same curve when presented as a function of ф*Rew−a. Further evaluation of the pump using computational fluid dynamics (CFD) simulations for wider range of viscosities demonstrated that the value of a (Morrison number) changes as the rotational Reynolds number increases. There is a sharp change in Morrison number in the range of 104<Rew<3*104 indicating a possible flow regime change between laminar and turbulent flow. The experimental data from previously published literature were utilized to determine the variation in the Morrison number as the function of rotational Reynolds number and specific speed. The Morrison number obtained from the CFD study was utilized to predict the head performance for the pump with known design parameters and performance from published literature. The results agree well with experimental data. The method presented in this paper can be used to establish a procedure to predict any pump's performance for different viscosities; however, more data are required to completely build the Morrison number plot.
- 21 September 2018
- Published by ASME International in Journal of Fluids Engineering
- Vol. 141 (2)
Affinity Law Modified to Predict the Pump Head Performance for Different Viscosities Using the Morrison Number
The goal of this study is to provide pump users a simple means to predict a pump's performance change due to changing fluid viscosity. During the initial investigation, it has been demonstrated that pump performance can be represented in terms of the head coefficient, flow coefficient, and rotational Reynolds number with the head coefficient data for all viscosities falling on the same curve when presented as a function of ф*Rew−a. Further evaluation of the pump using computational fluid dynamics (CFD) simulations for wider range of viscosities demonstrated that the value of a (Morrison number) changes as the rotational Reynolds number increases. There is a sharp change in Morrison number in the range of 104<Rew<3*104 indicating a possible flow regime change between laminar and turbulent flow. The experimental data from previously published literature were utilized to determine the variation in the Morrison number as the function of rotational Reynolds number and specific speed. The Morrison number obtained from the CFD study was utilized to predict the head performance for the pump with known design parameters and performance from published literature. The results agree well with experimental data. The method presented in this paper can be used to establish a procedure to predict any pump's performance for different viscosities; however, more data are required to completely build the Morrison number plot.