AGAnatoliy Gaydamaka

Anatoliy Gaydamaka

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anatoliy Gaydamaka has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • The Technical Condition Monitoring Model of Large Module Gears

    by Anatoliy Gaydamaka, Volodymyr Klitnoi, Hennadii Kulyk, Serhii Bobrytskyi, Andrii Lukashov

  • Open Access

    STRUCTURAL AND FUNCTIONAL MODEL OF BEARING ASSEMBLIES IN LOAD-BEARING UNITS OF RAIL TRANSPORT SYSTEMS

    by Anatoly Gaydamaka, Volodymyr Klitnoi, Viktor Klitnoy

    The type of roller bearings used in axleboxes (supporting units) of rail transport systems (RBSRT) varies depending on the operating conditions specific to each country. In the United Kingdom, the United States, Japan, and Poland, railcars are equipped with wheelsets fitted with double-row tapered roller bearings. In Austria, Germany, and Ukraine, bearing units typically comprise two cylindrical roller bearings, while in Sweden, axlebox assemblies with two spherical roller bearings are standard. For structural and functional analysis, the most common series-produced cylindrical RBSRT units used in Ukrainian freight and passenger rolling stock—representing nearly 99% of the total—were selected as the baseline design. A structural decomposition of the primary bearing assemblies was performed in accordance with their functional roles. Based on the developed structural and functional model of the cylindrical roller bearing, functional interrelations between the bearing components were identified. The analysis focused particularly on the functions of the cage (separator), including prevention of skewing, reduction of interaction forces with the rollers and bearing ring, and minimization of roller slippage. These insights supported the rationale for design modifications of the cage—specifically, increasing the number of windows, altering the shape of the side surfaces of the bridges, and optimizing the cross-section of the cage rings—to enhance the technical performance of RBSRT while maintaining dimensional compatibility.

  • Modeling of Vibration Isolation System Using Quasi-Zero Stiffness with Adaptive Piezoceramic Elements

    by Volodymyr Klitnoi, Anatoliy Gaydamaka, Yevhen Lukashov, Andrew Ruzmetov, Maria Teresa Malheiro

  • Open Access

    Study of the functioning and wear of the teeth of the intermediate gear of the vertical gearbox rolls of the slabing state - 1150

    by Dmytro Borodin, Anatoly Gaydamaka, Volodymyr Klitnoi, Gennady Kulik, Serhii Bobrytskyi

    Gears with large modules are widely used in heavy engineering, for example in rolling mills. The unpredictability of mechanical equipment overloads or operator error lead to premature failure, first of all, of typical parts like gear wheels. This article analyzes the nature of the wear of the...


  • Open Access

    PROBLEMS OF IMPROVING OF DYNAMIC MODELS OF CYLINDRICAL ROLLER BEARINGS

    by Anatoly Gaydamaka, Andrey Lukashov

    Проєктування конструкцій сепараторів вальниць на основі емпіричних даних не дає можливості оцінити вплив багатьох конструкційних та експлуатаційних факторів. Тому виникає потреба у розробці аналітичних моделей функціонування вальниць кочення для визначення величин навантажень, які діють з боку деталей вальниці на сепаратор. Для цього необхідно удосконалити моделі статики, кінематики і динаміки вальниць. В цій публікації розглядаються найбільш навантажені вальниці з циліндричними роликами нормального класу точності, які на відміну від вальниць з конічними роликами допускають вищу швидкість експлуатації. Відсутність науково обґрунтованої моделі кінематики циліндричних роликових вальниць нормального класу точності не дозволяє побудувати адекватну модель їх динаміки, а отже оцінити роботоздатність їх деталей, що впливає на надійність опорних вузлів машин. За аналізом технічної літератури встановлено, що переважна більшість сучасних публікацій з моделей динаміки присвячена швидкісній групі, яку застосовують в авіаційній та космічній галузях. Динаміка нешвидкісних циліндричних вальниць кочення важких режимів експлуатації найбільш досліджена для опорних вузлів рухомого складу залізничного транспорту. Сформульовано основні завдання з удосконалення моделей динаміки нешвидкісних циліндричних роликових вальниць нормального класу точності, які спрямовані на удосконалення моделей кінематики і дослідження динаміки вальниць у навантаженій і ненавантаженій зовнішніми силами зонах з урахуванням перекосу кілець і деформації сепаратора. Завдання з удосконалення моделей динаміки включатимуть розробку 3D-моделей в частині взаємодії сепаратора з роликами у зоні радіального навантаження і сепаратора з базуючим кільцем з урахуванням перекосів деталей. Нові моделі динаміки вальниці дозволять визначати сили взаємодії деталей при будь-яких режимах експлуатації для оцінки їх роботоздатності і проєктування оптимальних конструкцій сепаратора. Ключові слова: роликова вальниця, моделі динаміки, зона радіального навантаження, сепаратор, ролики

  • Modelling of Technical Condition Control of Heavy Loaded Gears Teeth

    by Anatoliy Gaydamaka, Yuriy Muzikin, Volodymyr Klitnoi, Andrew Ruzmetov, Tomáš Čakurda


  • Open Access

    Diagnostics of the technical condition and predic-tion of accident-free guaranteed operating time of heavily loaded machines gear wheels

    by Anatoliy Gaydamaka, Yurii Muzykin, Volodymyr Klitnoi

    Problem. This article highlights the current state of diagnostics of gears on the level of accumulated fatigue damage in operation. The generalization of the known information on determination of a technical condition of separate gear wheels, especially with big modules (m> 20 mm), allows to outline prospects of development of such diagnostics of a technical condition of gear wheels directly in the course of operation. Goal. The goal of this study is to develop an algorithm for diagnosing the technical condition and forecasting a fault-free operation of the gears of heavy-duty machines. Methodology. The least squares method and the confidence interval method are used to predict accident-free guaranteed gear operation. Results. A procedure for diagnosing the technical condition of gears by measuring the hardness of the metal has been developed, which includes five main stages: selection of the device; choice of measurement scheme; selection of the number of measurements, number and relative position of measuring points; development of a design of a template for measurements; development of a device for fastening templates. When determining the accident-free guaranteed operating time on the basis of several criteria of the limit state, the final decision is made on the criterion that determines the minimum term. Originality. The method of forecasting accident-free guaranteed operating time of gears is chosen taking into account the stages of running-in and stable in linear function accumulation of damage in operation. Practical value. The use of the developed procedure for diagnosing the technical condition of the gears of gearboxes of heavy-duty machines will significantly increase the efficiency of their operation due to the transition from scheduled preventive maintenance to maintenance according to the actual technical condition.


  • Selecting the Method for Pre-tightening Threaded Connections of Heavy Engineering Objects

    by Anatoliy Gaydamaka, Yuriy Muzikin, Volodymyr Klitnoi, Yevheniia Basova, Sergey Dobrotvorskiy


  • Studies of the Swirling Submerged Flow Through a Confuser

    by Andrii Rogovyi, Serhii Khovanskyi, Iryna Hrechka, Anatoly Gaydamaka


  • Open Access

    On the problem of vibration protection of rotor systems with elastic adaptive elements of quasi-zero stiffness

    by Volodymyr Klitnoi, Anatoliy Gaydamaka

    The analysis of scientific publications for rotor systems on the elastic supports made it possible to develop a basic version of the design scheme of active elastic support with controlled quasi-zero stiffness based on adaptive piezoceramic elements. The main components of the mathematical model...