Jingchen Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jingchen Zhang has a total of 81 co-authors. Here are the top co-authors by number of shared publications:
- Xiaodong Guo
School of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China
6 shared publications - Jiawen Li
PetroChina Xinjiang Oilfield Company, Karamay 834000, China
4 shared publications - Bobo Xie
PetroChina Xinjiang Oilfield Company, Karamay 834000, China
3 shared publications - Mingxing Wang
PetroChina Xinjiang Oilfield Company, Karamay 834000, China
3 shared publications Nicholas Izuchukwu Osuji
China University of Petroleum, Beijing, China
3 shared publications- Shixin Qiu
College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China
3 shared publications
Latest Publications
- Open Access
A Finite-Domain Robust Framework for Effective Wave-Velocity Calibration and Microseismic Source Location in Meter-Scale Rock Specimens
Locating fracture activity inside meter-scale rock specimens requires converting recorded wave arrivals into reliable source coordinates. In practice, this process is affected by uncertainty in wave velocity, abnormal arrival picks, incomplete sensor coverage, and the finite size of the specimen, which can lead to unstable or physically unreasonable locations. To address these issues, this study develops a finite-domain robust microseismic localization framework that integrates effective-velocity calibration, constrained source location, and robust treatment of abnormal observations within a unified workflow. The method was evaluated using controlled synthetic benchmarks covering different disturbance levels, propagation conditions, and timing errors. The results show that the proposed framework improves source-location accuracy and reduces large localization errors, with the clearest advantage under strongly disturbed arrival-time conditions and for events located near specimen boundaries. Additional sensitivity analyses demonstrate how propagation structure, sensor timing, and array configuration affect the estimated locations and effective velocity. The resulting workflow provides a reproducible and standardized approach for arrival-time-based microseismic localization in meter-scale rock specimens and offers a consistent basis for subsequent fracture interpretation and laboratory monitoring.
Open AccessA Finite-Domain Robust Framework for Effective Wave-Velocity Calibration and Microseismic Source Location in Meter-Scale Rock Specimens
Locating fracture activity inside meter-scale rock specimens requires converting recorded wave arrivals into reliable source coordinates. In practice, this process is affected by uncertainty in wave velocity, abnormal arrival picks, incomplete sensor coverage, and the finite size of the specimen, which can lead to unstable or physically unreasonable locations. To address these issues, this study develops a finite-domain robust microseismic localization framework that integrates effective-velocity calibration, constrained source location, and robust treatment of abnormal observations within a unified workflow. The method was evaluated using controlled synthetic benchmarks covering different disturbance levels, propagation conditions, and timing errors. The results show that the proposed framework improves source-location accuracy and reduces large localization errors, with the clearest advantage under strongly disturbed arrival-time conditions and for events located near specimen boundaries. Additional sensitivity analyses demonstrate how propagation structure, sensor timing, and array configuration affect the estimated locations and effective velocity. The resulting workflow provides a reproducible and standardized approach for arrival-time-based microseismic localization in meter-scale rock specimens and offers a consistent basis for subsequent fracture interpretation and laboratory monitoring.
- Open Access
- 30 September 2026
- Published by International Experts for Research Enrichment and Knowledge Exchange (IEREK) in Resourceedings
- Vol. 6 (2) , 35-61
Large-Scale Experimental Study of Proppant Transport and Placement in Rough Fractures of Conglomerate Reservoirs
Proppant placement in rough fractures is controlled by coupled effects of operating parameters, particle settling, and fracture-surface heterogeneity, yet quantitative criteria for evaluating final placement remain limited. This study reanalyzes previously obtained large-scale visualization data from a 20.3 m × 4.5 m × 10 mm rough-fracture system and develops an engineering-oriented framework for quantitative placement evaluation. Five indicators were introduced: normalized effective supported area, normalized effective supported length, near-wellbore accumulation ratio, distal coverage ratio, and ridge-height coefficient of variation. Their responses to pumping rate, fracturing-fluid viscosity, proppant size, and sand concentration were systematically compared. Results show that pumping rate primarily controls distal transport. Increasing the model pumping rate from 0.12 to 0.24 m³/min increased the normalized supported length from 0.875 to 1.000 and the distal coverage ratio from 0.026 to 0.115. Fluid viscosity and sand concentration showed stronger local sensitivities with respect to overall supported area, whereas particle size mainly affected the balance between distal transport and local deposition. Based on the combined indicators, four representative placement patterns were identified: near-wellbore accumulation, uniform spreading, distal-deficient placement, and bridging-prone high-loading placement. An exploratory four-factor power-law correlation was further evaluated using leave-one-out cross-validation. Although the in-sample fit was moderate, the LOOCV results showed limited predictive robustness, indicating that the correlation should be treated as a geometry-specific summary rather than a validated predictive model. The proposed indicators and classification framework provide a quantitative basis for comparing proppant-placement quality in large-scale rough fractures.
- 30 September 2026
- Published by International Experts for Research Enrichment and Knowledge Exchange (IEREK) in Resourceedings
- Vol. 6 (2) , 35-61
Open AccessLarge-Scale Experimental Study of Proppant Transport and Placement in Rough Fractures of Conglomerate Reservoirs
Proppant placement in rough fractures is controlled by coupled effects of operating parameters, particle settling, and fracture-surface heterogeneity, yet quantitative criteria for evaluating final placement remain limited. This study reanalyzes previously obtained large-scale visualization data from a 20.3 m × 4.5 m × 10 mm rough-fracture system and develops an engineering-oriented framework for quantitative placement evaluation. Five indicators were introduced: normalized effective supported area, normalized effective supported length, near-wellbore accumulation ratio, distal coverage ratio, and ridge-height coefficient of variation. Their responses to pumping rate, fracturing-fluid viscosity, proppant size, and sand concentration were systematically compared. Results show that pumping rate primarily controls distal transport. Increasing the model pumping rate from 0.12 to 0.24 m³/min increased the normalized supported length from 0.875 to 1.000 and the distal coverage ratio from 0.026 to 0.115. Fluid viscosity and sand concentration showed stronger local sensitivities with respect to overall supported area, whereas particle size mainly affected the balance between distal transport and local deposition. Based on the combined indicators, four representative placement patterns were identified: near-wellbore accumulation, uniform spreading, distal-deficient placement, and bridging-prone high-loading placement. An exploratory four-factor power-law correlation was further evaluated using leave-one-out cross-validation. Although the in-sample fit was moderate, the LOOCV results showed limited predictive robustness, indicating that the correlation should be treated as a geometry-specific summary rather than a validated predictive model. The proposed indicators and classification framework provide a quantitative basis for comparing proppant-placement quality in large-scale rough fractures.
- Open Access
Large Scale Physical Modeling of Shale Fracture Propagation Under Different Controllable Shock Wave and Perforation Operation Schemes
To address the relatively high near-wellbore fracture-initiation resistance and the tendency of hydraulic fractures to propagate along a dominant path under conventional perforation-based hydraulic fracturing, three large-scale hydraulic-fracturing experiments were conducted using a 10,000-ton ultra-large true-triaxial hydraulic-fracturing physical simulation system to investigate the effects of different controllable shock-wave–perforation operation schemes on shale fracture initiation and propagation. Natural shale outcrop blocks from the Jimsar shale oil reservoir, each measuring 2.0 m × 2.0 m × 1.0 m, were used. Three operation schemes were investigated: conventional perforation–hydraulic fracturing, shock wave–perforation–hydraulic fracturing, and perforation–shock wave–hydraulic fracturing. Post-fracturing fracture observations, three-dimensional fracture reconstruction, and wellhead-pressure responses were jointly analyzed to characterize fracture initiation and propagation under the different operation schemes. The results showed that, under conventional perforation–hydraulic fracturing, fracture propagation was dominated by a principal fracture, with only limited secondary fractures, and the wellhead breakdown pressure reached 21.2 MPa. After breakdown, the pressure remained at a relatively high level and exhibited sustained fluctuations, indicating large and continuously varying fracture-propagation resistance. When one 100 kJ shock was applied before perforation, several large-scale dominant fracture surfaces developed, and the breakdown pressure decreased to 6.6 MPa, representing a reduction of 68.9% relative to the conventional case. The post-breakdown pressure gradually stabilized, indicating reduced variation in fracture-propagation resistance. When two successive 100 kJ shocks were applied after perforation, fractures propagated in multiple directions with more pronounced bending, deflection, and branching. The breakdown pressure further decreased to 4.6 MPa, 78.3% lower than that of the conventional case. Fractures continued to propagate under relatively low pressure, followed by a late-stage pressure increase. The dynamic disturbance induced by controllable shock waves altered the near-wellbore stress distribution and rock-failure conditions, reduced hydraulic-fracture initiation resistance, and modified subsequent fracture-propagation paths. These results reveal the coupled mechanism of near-wellbore stress redistribution and dynamic fracture propagation induced by controllable shock-wave–perforation operations, and provide experimental support for fracture-initiation control and optimization of integrated stimulation parameters in the Jimsar shale oil reservoir.
Open AccessLarge Scale Physical Modeling of Shale Fracture Propagation Under Different Controllable Shock Wave and Perforation Operation Schemes
To address the relatively high near-wellbore fracture-initiation resistance and the tendency of hydraulic fractures to propagate along a dominant path under conventional perforation-based hydraulic fracturing, three large-scale hydraulic-fracturing experiments were conducted using a 10,000-ton ultra-large true-triaxial hydraulic-fracturing physical simulation system to investigate the effects of different controllable shock-wave–perforation operation schemes on shale fracture initiation and propagation. Natural shale outcrop blocks from the Jimsar shale oil reservoir, each measuring 2.0 m × 2.0 m × 1.0 m, were used. Three operation schemes were investigated: conventional perforation–hydraulic fracturing, shock wave–perforation–hydraulic fracturing, and perforation–shock wave–hydraulic fracturing. Post-fracturing fracture observations, three-dimensional fracture reconstruction, and wellhead-pressure responses were jointly analyzed to characterize fracture initiation and propagation under the different operation schemes. The results showed that, under conventional perforation–hydraulic fracturing, fracture propagation was dominated by a principal fracture, with only limited secondary fractures, and the wellhead breakdown pressure reached 21.2 MPa. After breakdown, the pressure remained at a relatively high level and exhibited sustained fluctuations, indicating large and continuously varying fracture-propagation resistance. When one 100 kJ shock was applied before perforation, several large-scale dominant fracture surfaces developed, and the breakdown pressure decreased to 6.6 MPa, representing a reduction of 68.9% relative to the conventional case. The post-breakdown pressure gradually stabilized, indicating reduced variation in fracture-propagation resistance. When two successive 100 kJ shocks were applied after perforation, fractures propagated in multiple directions with more pronounced bending, deflection, and branching. The breakdown pressure further decreased to 4.6 MPa, 78.3% lower than that of the conventional case. Fractures continued to propagate under relatively low pressure, followed by a late-stage pressure increase. The dynamic disturbance induced by controllable shock waves altered the near-wellbore stress distribution and rock-failure conditions, reduced hydraulic-fracture initiation resistance, and modified subsequent fracture-propagation paths. These results reveal the coupled mechanism of near-wellbore stress redistribution and dynamic fracture propagation induced by controllable shock-wave–perforation operations, and provide experimental support for fracture-initiation control and optimization of integrated stimulation parameters in the Jimsar shale oil reservoir.
- Open Access
Adaptive Connectivity and Robust Plane Extraction from Microseismic Event Clouds: A Systematic Benchmark and Conditional Case Study
Two-meter-scale true-triaxial hydraulic-fracturing models involve a large monitoring volume, strongly nonuniform microseismic event densities, and substantial vibration and background noise, making conventional fixed-scale clustering or direct geometric fitting prone to cluster fragmentation, event-band mixing, and low-support false planes. To address these limitations, this study proposes an automatic workflow for extracting dominant event planes from noisy microseismic point clouds. After quality control and spatial-boundary screening, nearest-neighbor statistics are used for adaptive density analysis, followed by support-first RANSAC plane fitting and PCA-based parameter refitting. Parameter sensitivity, null-model testing, and subsampling stability are further used to evaluate robustness. Extended synthetic tests demonstrate that the workflow can identify multiple planes under varying noise levels, event densities, plane spacing, and localization errors, while stage constraints are particularly important for separating spatially overlapping event bands. The method was then applied to three 2 m × 2 m × 1 m tight-sandstone fracturing experiments. For each specimen, 3200 high-quality candidate events were retained from approximately 10,000 located events. The extracted dominant subhorizontal event planes showed support fractions of 12.38%, 15.19%, and 11.94%, dips of 0.97°, 0.59°, and 1.83°, and RMS residuals of 10.96, 10.43, and 11.12 mm, respectively. The results indicate that the proposed workflow can consistently extract coherent dominant event planes from high-noise, nonuniform microseismic datasets in large-scale physical models. These planes represent dominant spatial structures of the located events and should not be interpreted directly as actual opened or conductive hydraulic-fracture surfaces.
Open AccessAdaptive Connectivity and Robust Plane Extraction from Microseismic Event Clouds: A Systematic Benchmark and Conditional Case Study
Two-meter-scale true-triaxial hydraulic-fracturing models involve a large monitoring volume, strongly nonuniform microseismic event densities, and substantial vibration and background noise, making conventional fixed-scale clustering or direct geometric fitting prone to cluster fragmentation, event-band mixing, and low-support false planes. To address these limitations, this study proposes an automatic workflow for extracting dominant event planes from noisy microseismic point clouds. After quality control and spatial-boundary screening, nearest-neighbor statistics are used for adaptive density analysis, followed by support-first RANSAC plane fitting and PCA-based parameter refitting. Parameter sensitivity, null-model testing, and subsampling stability are further used to evaluate robustness. Extended synthetic tests demonstrate that the workflow can identify multiple planes under varying noise levels, event densities, plane spacing, and localization errors, while stage constraints are particularly important for separating spatially overlapping event bands. The method was then applied to three 2 m × 2 m × 1 m tight-sandstone fracturing experiments. For each specimen, 3200 high-quality candidate events were retained from approximately 10,000 located events. The extracted dominant subhorizontal event planes showed support fractions of 12.38%, 15.19%, and 11.94%, dips of 0.97°, 0.59°, and 1.83°, and RMS residuals of 10.96, 10.43, and 11.12 mm, respectively. The results indicate that the proposed workflow can consistently extract coherent dominant event planes from high-noise, nonuniform microseismic datasets in large-scale physical models. These planes represent dominant spatial structures of the located events and should not be interpreted directly as actual opened or conductive hydraulic-fracture surfaces.
- Open Access
Hydraulic Fracture Propagation in Three Meter-Scale Reconstituted Tight Conglomerate Specimens Under Different Formulation Conditions
A tight conglomerate is mechanically heterogeneous because gravel particles, the matrix, and their contacts can perturb hydraulic-fracture paths. This study presents an exploratory comparison of three 2.0 m × 2.0 m × 1.0 m reconstituted conglomerate specimens, identified as specimen 97 (Condition A), specimen 98 (Condition B), and specimen 99 (Condition C). One meter-scale specimen was tested under each formulation condition using the same applied boundary stresses, nominal pumping rate, and fluid viscosity. Post-fracturing surface observations, inlet-pressure histories, and laboratory acoustic-emission (AE) event locations were examined. After event-quality control, DBSCAN-based spatial filtering was performed in Z-score-standardized coordinates, and three-dimensional alpha shapes were constructed from the retained event coordinates in meters to calculate geometric AE-event-envelope volumes. The external surface-fracture traces were more spatially distributed in specimen 97 and more localized in specimen 99. The available DBSCAN–alpha-shape calculation outputs yielded geometric AE-event-envelope volumes of 0.2832, 0.2460, and 0.0937 m3 for specimens 97, 98, and 99, respectively. Because only one specimen was tested under each condition, the specimen formulations and gravel characteristics were not identical, the gravel–matrix interfacial properties were not measured directly, and the pumping histories differed, the observations were interpreted as descriptive case differences rather than as a statistically validated single-factor relationship.
Open AccessHydraulic Fracture Propagation in Three Meter-Scale Reconstituted Tight Conglomerate Specimens Under Different Formulation Conditions
A tight conglomerate is mechanically heterogeneous because gravel particles, the matrix, and their contacts can perturb hydraulic-fracture paths. This study presents an exploratory comparison of three 2.0 m × 2.0 m × 1.0 m reconstituted conglomerate specimens, identified as specimen 97 (Condition A), specimen 98 (Condition B), and specimen 99 (Condition C). One meter-scale specimen was tested under each formulation condition using the same applied boundary stresses, nominal pumping rate, and fluid viscosity. Post-fracturing surface observations, inlet-pressure histories, and laboratory acoustic-emission (AE) event locations were examined. After event-quality control, DBSCAN-based spatial filtering was performed in Z-score-standardized coordinates, and three-dimensional alpha shapes were constructed from the retained event coordinates in meters to calculate geometric AE-event-envelope volumes. The external surface-fracture traces were more spatially distributed in specimen 97 and more localized in specimen 99. The available DBSCAN–alpha-shape calculation outputs yielded geometric AE-event-envelope volumes of 0.2832, 0.2460, and 0.0937 m3 for specimens 97, 98, and 99, respectively. Because only one specimen was tested under each condition, the specimen formulations and gravel characteristics were not identical, the gravel–matrix interfacial properties were not measured directly, and the pumping histories differed, the observations were interpreted as descriptive case differences rather than as a statistically validated single-factor relationship.
- Open Access
An Integrated Fluent and CFD-DEM Screening Framework for Proppant Transport in a 20 m Rough-Wall Fracture System
Rough-walled fractures in conglomerate reservoirs promote near-wellbore proppant deposition, nonuniform flow, and insufficient distal support, making proppant-schedule screening difficult using small-scale smooth-slot tests alone. This study develops a benchmark-constrained and cost-aware hierarchical screening workflow by integrating a 20 m rough-wall physical experiment, transient Fluent simulations, and archived short-time EDEM sensitivity records. The benchmark experiment used a 20 m × 4.5 m × 10 mm artificial rough-wall fracture and ten operating conditions involving pumping rate, fluid viscosity, proppant size, and sand concentration. In the Fluent model, wall roughness was treated as a regularized roughness representation, and the carrier fluids were modeled using Newtonian constant viscosities measured from laboratory calibration. The experimental effective propped area ranged from 25.5% to 65.1%. Within single-factor comparison subsets, medium viscosity improved support continuity, pumping-rate gains became limited near 0.20 m3/min, particle size affected the balance between distal coverage and bed stability, and 300 kg/m3 sand concentration caused blockage. Image-segmentation-based comparison showed that Fluent captured the main wedge-shaped deposition morphology and screening-level geometric trends. The archived EDEM records indicated that grid-resolution refinement and mixed particle-size representation substantially increased computational cost. A Case 10 mesh-sensitivity check further confirmed that mesh refinement did not alter the first-order deposition morphology. The proposed workflow uses Fluent for whole-domain rapid screening and reserves EDEM/CFD-DEM for targeted short-time sensitivity checks.
Open AccessAn Integrated Fluent and CFD-DEM Screening Framework for Proppant Transport in a 20 m Rough-Wall Fracture System
Rough-walled fractures in conglomerate reservoirs promote near-wellbore proppant deposition, nonuniform flow, and insufficient distal support, making proppant-schedule screening difficult using small-scale smooth-slot tests alone. This study develops a benchmark-constrained and cost-aware hierarchical screening workflow by integrating a 20 m rough-wall physical experiment, transient Fluent simulations, and archived short-time EDEM sensitivity records. The benchmark experiment used a 20 m × 4.5 m × 10 mm artificial rough-wall fracture and ten operating conditions involving pumping rate, fluid viscosity, proppant size, and sand concentration. In the Fluent model, wall roughness was treated as a regularized roughness representation, and the carrier fluids were modeled using Newtonian constant viscosities measured from laboratory calibration. The experimental effective propped area ranged from 25.5% to 65.1%. Within single-factor comparison subsets, medium viscosity improved support continuity, pumping-rate gains became limited near 0.20 m3/min, particle size affected the balance between distal coverage and bed stability, and 300 kg/m3 sand concentration caused blockage. Image-segmentation-based comparison showed that Fluent captured the main wedge-shaped deposition morphology and screening-level geometric trends. The archived EDEM records indicated that grid-resolution refinement and mixed particle-size representation substantially increased computational cost. A Case 10 mesh-sensitivity check further confirmed that mesh refinement did not alter the first-order deposition morphology. The proposed workflow uses Fluent for whole-domain rapid screening and reserves EDEM/CFD-DEM for targeted short-time sensitivity checks.
- Open Access
- 28 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (5) , 2350
Wide-Field Electromagnetic Monitoring of Multi-Cluster Fracture Propagation in Conglomerate Reservoirs: A Field Case from the Baikouquan Formation, Mahu Sag
Multi-stage multi-cluster hydraulic fracturing in conglomerate reservoirs is often characterized by strong cluster-to-cluster variability in fluid distribution, which can reduce stimulation efficiency. However, field-scale observations that constrain how injected fluid is partitioned among clusters remain limited, especially in strongly heterogeneous formations. In this study, wide-field electromagnetic (WFEM) monitoring was applied to a horizontal well completed in the Baikouquan Formation sandstone–conglomerate reservoir of the Mahu Sag, Junggar Basin. The monitored treatment consisted of 13 fracturing stages, each containing six perforation clusters. Time-lapse electromagnetic data acquired during pumping were inverted to reconstruct the spatiotemporal evolution of the effective conductive fluid-swept region. Based on the inversion results, we introduce a set of quantitative proxy indicators (swept area, swept length, cluster-specific sweep, and an asymmetric index) to support relative comparison of fluid distribution patterns at both stage and cluster scales. Results show pronounced non-uniformity within and between stages, even under similar pumping conditions. A limited number of clusters exhibit stronger and farther-reaching WFEM-inferred conductive-fluid responses, whereas other clusters show weaker or more localized responses. Asymmetric sweep patterns on opposite sides of the wellbore are also commonly observed. These patterns are consistent with the combined influences of reservoir heterogeneity, local structural/stress disturbances, and operational factors, although WFEM alone does not uniquely validate causal mechanisms of fracture growth. Overall, this study demonstrates that WFEM monitoring provides a field-scale proxy tool for delineating effective conductive fluid-swept regions and for evaluating cluster-to-cluster variability under consistent acquisition and inversion settings. The findings offer practical guidance for interpreting fluid distribution and optimizing multi-cluster fracturing in strongly heterogeneous unconventional reservoirs.
- 28 February 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (5) , 2350
Open AccessWide-Field Electromagnetic Monitoring of Multi-Cluster Fracture Propagation in Conglomerate Reservoirs: A Field Case from the Baikouquan Formation, Mahu Sag
Multi-stage multi-cluster hydraulic fracturing in conglomerate reservoirs is often characterized by strong cluster-to-cluster variability in fluid distribution, which can reduce stimulation efficiency. However, field-scale observations that constrain how injected fluid is partitioned among clusters remain limited, especially in strongly heterogeneous formations. In this study, wide-field electromagnetic (WFEM) monitoring was applied to a horizontal well completed in the Baikouquan Formation sandstone–conglomerate reservoir of the Mahu Sag, Junggar Basin. The monitored treatment consisted of 13 fracturing stages, each containing six perforation clusters. Time-lapse electromagnetic data acquired during pumping were inverted to reconstruct the spatiotemporal evolution of the effective conductive fluid-swept region. Based on the inversion results, we introduce a set of quantitative proxy indicators (swept area, swept length, cluster-specific sweep, and an asymmetric index) to support relative comparison of fluid distribution patterns at both stage and cluster scales. Results show pronounced non-uniformity within and between stages, even under similar pumping conditions. A limited number of clusters exhibit stronger and farther-reaching WFEM-inferred conductive-fluid responses, whereas other clusters show weaker or more localized responses. Asymmetric sweep patterns on opposite sides of the wellbore are also commonly observed. These patterns are consistent with the combined influences of reservoir heterogeneity, local structural/stress disturbances, and operational factors, although WFEM alone does not uniquely validate causal mechanisms of fracture growth. Overall, this study demonstrates that WFEM monitoring provides a field-scale proxy tool for delineating effective conductive fluid-swept regions and for evaluating cluster-to-cluster variability under consistent acquisition and inversion settings. The findings offer practical guidance for interpreting fluid distribution and optimizing multi-cluster fracturing in strongly heterogeneous unconventional reservoirs.
- Open Access
Large-Scale Mine Experimental Study on the Crack Extension Law of Deep-Seated Coal Rock
Deep-seated coalbed methane (CBM) resources in the Daniudi Gas Field of the Ordos Basin are abundant; however, conventional laboratory-scale hydraulic fracturing experiments are unable to realistically reproduce fracture propagation behavior due to pronounced reservoir heterogeneity and the complex development of bedding and cleat structures. In this study, a self-developed 10,000-ton true triaxial hydraulic fracturing simulation platform was employed to conduct mine-scale experiments using large 2 m × 2 m × 1 m No. 8 coal-rock outcrop specimens. A full-scale steel-casing wellbore and an industrial fracturing fluid system were incorporated to replicate field conditions. Experiments were performed under varying pumping rates (0.2–0.4 m3/min) and fracturing fluid viscosities (10–50 mPa·s). The results indicate that post-failure fractures in deep coal formations primarily develop into complex fracture zones extending vertically from the wellbore. Their morphology is strongly governed by bedding planes and cleats, producing tortuous, banded, and mesh-like patterns. When the fracturing fluid viscosity is maintained between 18 and 27 mPa·s, longitudinal fracture diversion along the wellbore is effectively suppressed, while the increased static pressure promotes the activation of natural fractures. Increasing the pumping rate to 0.4 m3/min markedly enhances the stimulated reservoir volume (SRV), with an increase of approximately 1354%, and significantly increases fracture branch density. However, higher viscosities (>27 mPa·s), despite promoting fracture complexity, reduce proppant transport efficiency due to increased in-fracture tortuosity. This study quantitatively characterizes the coupled responses of fracture volume fraction, branch density, and fracture-surface roughness, and elucidates the interplay between displacement and viscosity in governing fracture network evolution. The findings provide an important experimental foundation for optimizing hydraulic fracturing parameters in the efficient development of deep-seated CBM reservoirs.
Open AccessLarge-Scale Mine Experimental Study on the Crack Extension Law of Deep-Seated Coal Rock
Deep-seated coalbed methane (CBM) resources in the Daniudi Gas Field of the Ordos Basin are abundant; however, conventional laboratory-scale hydraulic fracturing experiments are unable to realistically reproduce fracture propagation behavior due to pronounced reservoir heterogeneity and the complex development of bedding and cleat structures. In this study, a self-developed 10,000-ton true triaxial hydraulic fracturing simulation platform was employed to conduct mine-scale experiments using large 2 m × 2 m × 1 m No. 8 coal-rock outcrop specimens. A full-scale steel-casing wellbore and an industrial fracturing fluid system were incorporated to replicate field conditions. Experiments were performed under varying pumping rates (0.2–0.4 m3/min) and fracturing fluid viscosities (10–50 mPa·s). The results indicate that post-failure fractures in deep coal formations primarily develop into complex fracture zones extending vertically from the wellbore. Their morphology is strongly governed by bedding planes and cleats, producing tortuous, banded, and mesh-like patterns. When the fracturing fluid viscosity is maintained between 18 and 27 mPa·s, longitudinal fracture diversion along the wellbore is effectively suppressed, while the increased static pressure promotes the activation of natural fractures. Increasing the pumping rate to 0.4 m3/min markedly enhances the stimulated reservoir volume (SRV), with an increase of approximately 1354%, and significantly increases fracture branch density. However, higher viscosities (>27 mPa·s), despite promoting fracture complexity, reduce proppant transport efficiency due to increased in-fracture tortuosity. This study quantitatively characterizes the coupled responses of fracture volume fraction, branch density, and fracture-surface roughness, and elucidates the interplay between displacement and viscosity in governing fracture network evolution. The findings provide an important experimental foundation for optimizing hydraulic fracturing parameters in the efficient development of deep-seated CBM reservoirs.
- Open Access
Capillary–Viscoelastic Coupling and Multiscale Imbibition Dynamics in Tight Conglomerate Rocks
Tight conglomerate reservoirs exhibit strong pore-scale heterogeneity and extremely low permeability, in which spontaneous imbibition is primarily governed by capillary and viscoelastic effects. In this study, the imbibition dynamics of four representative fracturing fluid systems, including slickwater, 3% potassium chloride (KCl) brine, hydrolyzed polyacrylamide (HPAM) viscoelastic fluid, and a nanoemulsion (NE), were investigated using a temperature-controlled nuclear magnetic resonance (NMR) monitoring system. This approach enables real-time quantification of fluid uptake and pore-scale redistribution through time-resolved T2 spectral analysis. The experimental results reveal a three-stage imbibition process consisting of rapid capillary-driven uptake, viscoelastic-retarded transition, and final equilibrium. Among the four fracturing fluid systems, the nanoemulsion exhibits the lowest interfacial tension (1.72 mN/m), the strongest wettability alteration, and the highest equilibrium recovery (0.76), which is nearly 80% greater than that of slickwater. Based on these observations, a multiscale capillary–viscoelastic coupling model was developed by extending the Lucas–Washburn framework to incorporate pore-size distribution, time-dependent wettability evolution, and viscoelastic damping. The model fits the experimental data well (R2 > 0.90) and identifies viscosity as the most influential parameter controlling the imbibition rate (sensitivity = 0.78). Energy analysis further indicates that capillary energy dominates the early stage, whereas viscoelastic energy storage sustains fluid transport during the later stage. SEM observations were further used to qualitatively corroborate pore heterogeneity and pore–mineral associations, supporting the NMR-based pore-scale interpretation. This study provides a quantitative framework for describing non-Newtonian capillary flow in tight conglomerate rocks and enhances the understanding of capillary–viscoelastic interactions relevant to multiphase fluid migration.
Open AccessCapillary–Viscoelastic Coupling and Multiscale Imbibition Dynamics in Tight Conglomerate Rocks
Tight conglomerate reservoirs exhibit strong pore-scale heterogeneity and extremely low permeability, in which spontaneous imbibition is primarily governed by capillary and viscoelastic effects. In this study, the imbibition dynamics of four representative fracturing fluid systems, including slickwater, 3% potassium chloride (KCl) brine, hydrolyzed polyacrylamide (HPAM) viscoelastic fluid, and a nanoemulsion (NE), were investigated using a temperature-controlled nuclear magnetic resonance (NMR) monitoring system. This approach enables real-time quantification of fluid uptake and pore-scale redistribution through time-resolved T2 spectral analysis. The experimental results reveal a three-stage imbibition process consisting of rapid capillary-driven uptake, viscoelastic-retarded transition, and final equilibrium. Among the four fracturing fluid systems, the nanoemulsion exhibits the lowest interfacial tension (1.72 mN/m), the strongest wettability alteration, and the highest equilibrium recovery (0.76), which is nearly 80% greater than that of slickwater. Based on these observations, a multiscale capillary–viscoelastic coupling model was developed by extending the Lucas–Washburn framework to incorporate pore-size distribution, time-dependent wettability evolution, and viscoelastic damping. The model fits the experimental data well (R2 > 0.90) and identifies viscosity as the most influential parameter controlling the imbibition rate (sensitivity = 0.78). Energy analysis further indicates that capillary energy dominates the early stage, whereas viscoelastic energy storage sustains fluid transport during the later stage. SEM observations were further used to qualitatively corroborate pore heterogeneity and pore–mineral associations, supporting the NMR-based pore-scale interpretation. This study provides a quantitative framework for describing non-Newtonian capillary flow in tight conglomerate rocks and enhances the understanding of capillary–viscoelastic interactions relevant to multiphase fluid migration.
- Open Access
Proppant Transport and Deposition Mechanisms in Rough-Wall Fractures of the Mahu Conglomerate Reservoir: Insights from a 20 m Multiscale Physical Simulation
Efficient proppant transport in conglomerate reservoirs is severely constrained by rough fracture surfaces and strong geometric heterogeneity, leading to premature near-wellbore deposition and insufficient distal support. To address this challenge, this study aims to clarify the transport and deposition mechanisms of proppants in rough-wall fractures representative of the Mahu conglomerate reservoir. A large-scale visualized physical simulation system with an artificial rough fracture (20 m length × 4.5 m height) was developed based on dynamic similarity principles, enabling long-distance proppant transport observation under controlled pumping rate, fluid viscosity, proppant size, and sand concentration. Ten systematic experiments were conducted, and real-time particle motion and sand ridge evolution were captured using high-speed imaging and pressure monitoring. The results show that proppants form longitudinally layered sand ridges that evolve through three stages: leading-edge initiation, equilibrium-height growth, and distal extension. Viscosity and sand concentration primarily control propped-area continuity, while pumping rate governs transport distance and particle size affects structural stability. Rough fracture surfaces significantly intensify near-wellbore accumulation by enhancing energy dissipation and local flow heterogeneity. These findings provide mechanistic insights into proppant transport in rough fractures and offer quantitative guidance for optimizing fracturing parameters in conglomerate reservoirs.
Open AccessProppant Transport and Deposition Mechanisms in Rough-Wall Fractures of the Mahu Conglomerate Reservoir: Insights from a 20 m Multiscale Physical Simulation
Efficient proppant transport in conglomerate reservoirs is severely constrained by rough fracture surfaces and strong geometric heterogeneity, leading to premature near-wellbore deposition and insufficient distal support. To address this challenge, this study aims to clarify the transport and deposition mechanisms of proppants in rough-wall fractures representative of the Mahu conglomerate reservoir. A large-scale visualized physical simulation system with an artificial rough fracture (20 m length × 4.5 m height) was developed based on dynamic similarity principles, enabling long-distance proppant transport observation under controlled pumping rate, fluid viscosity, proppant size, and sand concentration. Ten systematic experiments were conducted, and real-time particle motion and sand ridge evolution were captured using high-speed imaging and pressure monitoring. The results show that proppants form longitudinally layered sand ridges that evolve through three stages: leading-edge initiation, equilibrium-height growth, and distal extension. Viscosity and sand concentration primarily control propped-area continuity, while pumping rate governs transport distance and particle size affects structural stability. Rough fracture surfaces significantly intensify near-wellbore accumulation by enhancing energy dissipation and local flow heterogeneity. These findings provide mechanistic insights into proppant transport in rough fractures and offer quantitative guidance for optimizing fracturing parameters in conglomerate reservoirs.