Jiawen Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jiawen Li has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Jingchen Zhang
National Key Laboratory of Oil and Gas Resources and Engineering, China University of Petroleum (Beijing), Beijing 102249, China
4 shared publications - Bobo Xie
PetroChina Xinjiang Oilfield Company, Karamay 834000, China
2 shared publications - Jinchi Teng
PetroChina Xinjiang Oilfield Company, Karamay 834000, China
2 shared publications - Linjie Wang
College of Petroleum Engineering, China University of Petroleum (Beijing), Beijing 102249, China
2 shared publications - Xi Chen
PetroChina Xinjiang Oilfield Company, Karamay 834000, China
2 shared publications - Zhanjie Li
PetroChina Xinjiang Oilfield Company, Karamay 834000, China
2 shared publications
Latest Publications
- Open Access
A Finite-Domain Robust Framework for Effective Wave-Velocity Calibration and Microseismic Source Location in Meter-Scale Rock Specimens
Locating fracture activity inside meter-scale rock specimens requires converting recorded wave arrivals into reliable source coordinates. In practice, this process is affected by uncertainty in wave velocity, abnormal arrival picks, incomplete sensor coverage, and the finite size of the specimen, which can lead to unstable or physically unreasonable locations. To address these issues, this study develops a finite-domain robust microseismic localization framework that integrates effective-velocity calibration, constrained source location, and robust treatment of abnormal observations within a unified workflow. The method was evaluated using controlled synthetic benchmarks covering different disturbance levels, propagation conditions, and timing errors. The results show that the proposed framework improves source-location accuracy and reduces large localization errors, with the clearest advantage under strongly disturbed arrival-time conditions and for events located near specimen boundaries. Additional sensitivity analyses demonstrate how propagation structure, sensor timing, and array configuration affect the estimated locations and effective velocity. The resulting workflow provides a reproducible and standardized approach for arrival-time-based microseismic localization in meter-scale rock specimens and offers a consistent basis for subsequent fracture interpretation and laboratory monitoring.
Open AccessA Finite-Domain Robust Framework for Effective Wave-Velocity Calibration and Microseismic Source Location in Meter-Scale Rock Specimens
Locating fracture activity inside meter-scale rock specimens requires converting recorded wave arrivals into reliable source coordinates. In practice, this process is affected by uncertainty in wave velocity, abnormal arrival picks, incomplete sensor coverage, and the finite size of the specimen, which can lead to unstable or physically unreasonable locations. To address these issues, this study develops a finite-domain robust microseismic localization framework that integrates effective-velocity calibration, constrained source location, and robust treatment of abnormal observations within a unified workflow. The method was evaluated using controlled synthetic benchmarks covering different disturbance levels, propagation conditions, and timing errors. The results show that the proposed framework improves source-location accuracy and reduces large localization errors, with the clearest advantage under strongly disturbed arrival-time conditions and for events located near specimen boundaries. Additional sensitivity analyses demonstrate how propagation structure, sensor timing, and array configuration affect the estimated locations and effective velocity. The resulting workflow provides a reproducible and standardized approach for arrival-time-based microseismic localization in meter-scale rock specimens and offers a consistent basis for subsequent fracture interpretation and laboratory monitoring.
- Open Access
Large Scale Physical Modeling of Shale Fracture Propagation Under Different Controllable Shock Wave and Perforation Operation Schemes
To address the relatively high near-wellbore fracture-initiation resistance and the tendency of hydraulic fractures to propagate along a dominant path under conventional perforation-based hydraulic fracturing, three large-scale hydraulic-fracturing experiments were conducted using a 10,000-ton ultra-large true-triaxial hydraulic-fracturing physical simulation system to investigate the effects of different controllable shock-wave–perforation operation schemes on shale fracture initiation and propagation. Natural shale outcrop blocks from the Jimsar shale oil reservoir, each measuring 2.0 m × 2.0 m × 1.0 m, were used. Three operation schemes were investigated: conventional perforation–hydraulic fracturing, shock wave–perforation–hydraulic fracturing, and perforation–shock wave–hydraulic fracturing. Post-fracturing fracture observations, three-dimensional fracture reconstruction, and wellhead-pressure responses were jointly analyzed to characterize fracture initiation and propagation under the different operation schemes. The results showed that, under conventional perforation–hydraulic fracturing, fracture propagation was dominated by a principal fracture, with only limited secondary fractures, and the wellhead breakdown pressure reached 21.2 MPa. After breakdown, the pressure remained at a relatively high level and exhibited sustained fluctuations, indicating large and continuously varying fracture-propagation resistance. When one 100 kJ shock was applied before perforation, several large-scale dominant fracture surfaces developed, and the breakdown pressure decreased to 6.6 MPa, representing a reduction of 68.9% relative to the conventional case. The post-breakdown pressure gradually stabilized, indicating reduced variation in fracture-propagation resistance. When two successive 100 kJ shocks were applied after perforation, fractures propagated in multiple directions with more pronounced bending, deflection, and branching. The breakdown pressure further decreased to 4.6 MPa, 78.3% lower than that of the conventional case. Fractures continued to propagate under relatively low pressure, followed by a late-stage pressure increase. The dynamic disturbance induced by controllable shock waves altered the near-wellbore stress distribution and rock-failure conditions, reduced hydraulic-fracture initiation resistance, and modified subsequent fracture-propagation paths. These results reveal the coupled mechanism of near-wellbore stress redistribution and dynamic fracture propagation induced by controllable shock-wave–perforation operations, and provide experimental support for fracture-initiation control and optimization of integrated stimulation parameters in the Jimsar shale oil reservoir.
Open AccessLarge Scale Physical Modeling of Shale Fracture Propagation Under Different Controllable Shock Wave and Perforation Operation Schemes
To address the relatively high near-wellbore fracture-initiation resistance and the tendency of hydraulic fractures to propagate along a dominant path under conventional perforation-based hydraulic fracturing, three large-scale hydraulic-fracturing experiments were conducted using a 10,000-ton ultra-large true-triaxial hydraulic-fracturing physical simulation system to investigate the effects of different controllable shock-wave–perforation operation schemes on shale fracture initiation and propagation. Natural shale outcrop blocks from the Jimsar shale oil reservoir, each measuring 2.0 m × 2.0 m × 1.0 m, were used. Three operation schemes were investigated: conventional perforation–hydraulic fracturing, shock wave–perforation–hydraulic fracturing, and perforation–shock wave–hydraulic fracturing. Post-fracturing fracture observations, three-dimensional fracture reconstruction, and wellhead-pressure responses were jointly analyzed to characterize fracture initiation and propagation under the different operation schemes. The results showed that, under conventional perforation–hydraulic fracturing, fracture propagation was dominated by a principal fracture, with only limited secondary fractures, and the wellhead breakdown pressure reached 21.2 MPa. After breakdown, the pressure remained at a relatively high level and exhibited sustained fluctuations, indicating large and continuously varying fracture-propagation resistance. When one 100 kJ shock was applied before perforation, several large-scale dominant fracture surfaces developed, and the breakdown pressure decreased to 6.6 MPa, representing a reduction of 68.9% relative to the conventional case. The post-breakdown pressure gradually stabilized, indicating reduced variation in fracture-propagation resistance. When two successive 100 kJ shocks were applied after perforation, fractures propagated in multiple directions with more pronounced bending, deflection, and branching. The breakdown pressure further decreased to 4.6 MPa, 78.3% lower than that of the conventional case. Fractures continued to propagate under relatively low pressure, followed by a late-stage pressure increase. The dynamic disturbance induced by controllable shock waves altered the near-wellbore stress distribution and rock-failure conditions, reduced hydraulic-fracture initiation resistance, and modified subsequent fracture-propagation paths. These results reveal the coupled mechanism of near-wellbore stress redistribution and dynamic fracture propagation induced by controllable shock-wave–perforation operations, and provide experimental support for fracture-initiation control and optimization of integrated stimulation parameters in the Jimsar shale oil reservoir.
- Open Access
Hydraulic Fracture Propagation in Three Meter-Scale Reconstituted Tight Conglomerate Specimens Under Different Formulation Conditions
A tight conglomerate is mechanically heterogeneous because gravel particles, the matrix, and their contacts can perturb hydraulic-fracture paths. This study presents an exploratory comparison of three 2.0 m × 2.0 m × 1.0 m reconstituted conglomerate specimens, identified as specimen 97 (Condition A), specimen 98 (Condition B), and specimen 99 (Condition C). One meter-scale specimen was tested under each formulation condition using the same applied boundary stresses, nominal pumping rate, and fluid viscosity. Post-fracturing surface observations, inlet-pressure histories, and laboratory acoustic-emission (AE) event locations were examined. After event-quality control, DBSCAN-based spatial filtering was performed in Z-score-standardized coordinates, and three-dimensional alpha shapes were constructed from the retained event coordinates in meters to calculate geometric AE-event-envelope volumes. The external surface-fracture traces were more spatially distributed in specimen 97 and more localized in specimen 99. The available DBSCAN–alpha-shape calculation outputs yielded geometric AE-event-envelope volumes of 0.2832, 0.2460, and 0.0937 m3 for specimens 97, 98, and 99, respectively. Because only one specimen was tested under each condition, the specimen formulations and gravel characteristics were not identical, the gravel–matrix interfacial properties were not measured directly, and the pumping histories differed, the observations were interpreted as descriptive case differences rather than as a statistically validated single-factor relationship.
Open AccessHydraulic Fracture Propagation in Three Meter-Scale Reconstituted Tight Conglomerate Specimens Under Different Formulation Conditions
A tight conglomerate is mechanically heterogeneous because gravel particles, the matrix, and their contacts can perturb hydraulic-fracture paths. This study presents an exploratory comparison of three 2.0 m × 2.0 m × 1.0 m reconstituted conglomerate specimens, identified as specimen 97 (Condition A), specimen 98 (Condition B), and specimen 99 (Condition C). One meter-scale specimen was tested under each formulation condition using the same applied boundary stresses, nominal pumping rate, and fluid viscosity. Post-fracturing surface observations, inlet-pressure histories, and laboratory acoustic-emission (AE) event locations were examined. After event-quality control, DBSCAN-based spatial filtering was performed in Z-score-standardized coordinates, and three-dimensional alpha shapes were constructed from the retained event coordinates in meters to calculate geometric AE-event-envelope volumes. The external surface-fracture traces were more spatially distributed in specimen 97 and more localized in specimen 99. The available DBSCAN–alpha-shape calculation outputs yielded geometric AE-event-envelope volumes of 0.2832, 0.2460, and 0.0937 m3 for specimens 97, 98, and 99, respectively. Because only one specimen was tested under each condition, the specimen formulations and gravel characteristics were not identical, the gravel–matrix interfacial properties were not measured directly, and the pumping histories differed, the observations were interpreted as descriptive case differences rather than as a statistically validated single-factor relationship.
- Open Access
An Integrated Fluent and CFD-DEM Screening Framework for Proppant Transport in a 20 m Rough-Wall Fracture System
Rough-walled fractures in conglomerate reservoirs promote near-wellbore proppant deposition, nonuniform flow, and insufficient distal support, making proppant-schedule screening difficult using small-scale smooth-slot tests alone. This study develops a benchmark-constrained and cost-aware hierarchical screening workflow by integrating a 20 m rough-wall physical experiment, transient Fluent simulations, and archived short-time EDEM sensitivity records. The benchmark experiment used a 20 m × 4.5 m × 10 mm artificial rough-wall fracture and ten operating conditions involving pumping rate, fluid viscosity, proppant size, and sand concentration. In the Fluent model, wall roughness was treated as a regularized roughness representation, and the carrier fluids were modeled using Newtonian constant viscosities measured from laboratory calibration. The experimental effective propped area ranged from 25.5% to 65.1%. Within single-factor comparison subsets, medium viscosity improved support continuity, pumping-rate gains became limited near 0.20 m3/min, particle size affected the balance between distal coverage and bed stability, and 300 kg/m3 sand concentration caused blockage. Image-segmentation-based comparison showed that Fluent captured the main wedge-shaped deposition morphology and screening-level geometric trends. The archived EDEM records indicated that grid-resolution refinement and mixed particle-size representation substantially increased computational cost. A Case 10 mesh-sensitivity check further confirmed that mesh refinement did not alter the first-order deposition morphology. The proposed workflow uses Fluent for whole-domain rapid screening and reserves EDEM/CFD-DEM for targeted short-time sensitivity checks.
Open AccessAn Integrated Fluent and CFD-DEM Screening Framework for Proppant Transport in a 20 m Rough-Wall Fracture System
Rough-walled fractures in conglomerate reservoirs promote near-wellbore proppant deposition, nonuniform flow, and insufficient distal support, making proppant-schedule screening difficult using small-scale smooth-slot tests alone. This study develops a benchmark-constrained and cost-aware hierarchical screening workflow by integrating a 20 m rough-wall physical experiment, transient Fluent simulations, and archived short-time EDEM sensitivity records. The benchmark experiment used a 20 m × 4.5 m × 10 mm artificial rough-wall fracture and ten operating conditions involving pumping rate, fluid viscosity, proppant size, and sand concentration. In the Fluent model, wall roughness was treated as a regularized roughness representation, and the carrier fluids were modeled using Newtonian constant viscosities measured from laboratory calibration. The experimental effective propped area ranged from 25.5% to 65.1%. Within single-factor comparison subsets, medium viscosity improved support continuity, pumping-rate gains became limited near 0.20 m3/min, particle size affected the balance between distal coverage and bed stability, and 300 kg/m3 sand concentration caused blockage. Image-segmentation-based comparison showed that Fluent captured the main wedge-shaped deposition morphology and screening-level geometric trends. The archived EDEM records indicated that grid-resolution refinement and mixed particle-size representation substantially increased computational cost. A Case 10 mesh-sensitivity check further confirmed that mesh refinement did not alter the first-order deposition morphology. The proposed workflow uses Fluent for whole-domain rapid screening and reserves EDEM/CFD-DEM for targeted short-time sensitivity checks.