WZWenying Zhang

Wenying Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wenying Zhang has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Cold-Formed Steel Shear Wall Using Corrugated Steel Sheathing with Slits

    by Cheng Yu, Wenying Zhang, Guowang Yu, Jie Wang

    Recent research shows that shear walls with corrugated steel sheathing demonstrate high strength and high initial stiffness but low ductility. This paper presents an experimental study and numerical simulation aimed at improving the ductility of cold-formed steel shear walls sheathed with corrugated steel sheathing. A method of introducing slit openings in the field of sheathing is used to improve the shear wall’s ductility and control the failure mode and location. Ten full-scale shear wall specimens are tested, including six different slit configurations. The results show that with proper a slit pattern in the sheathing, the corrugated steel sheathed shear wall can yield significantly improved ductility while maintaining a high level of shear strength. Additionally, nonlinear dynamic analyses are carried out to verify the improvement of the building’s seismic performance when the innovative shear wall is installed. The dynamic analyses show that the new shear wall system can greatly reduce the seismic effects and decrease the collapse probability of cold-formed steel buildings.


  • Seismic Performance Evaluation of Cold-Formed Steel Shear Walls Using Corrugated Steel Sheathing

    by Wenying Zhang, Mahsa Mahdavian, Yuanqi Li, Cheng Yu

    Cold-formed steel shear wall with corrugated sheet steel sheathing is a newly proposed lateral force resisting system from recent research work. The advantages of noncombustibility, high shear strength and high shear stiffness enable this new wall system to be a feasible solution for low- and midrise construction at high wind and seismic zones. The design provisions for this new type of shear wall have not been developed in current design specifications. The initial phase of this research project involved the displacement-based testing of bearing wall and shear wall specimens under combined lateral and gravity loading. The phase two research, presented here, includes the nonlinear finite element analysis and the performance evaluation of a set of light framed steel buildings using the corrugated sheet sheathed shear walls. Incremental dynamic analyses were performed on six archetype buildings and seismic performance assessment was evaluated. The results verify a set of seismic performance factors (R=Cd=6.5 and Ω=3.0 ) for the corrugated sheet sheathed shear wall systems.


  • Design of Cold-Formed Steel Clip Angles in Compression

    by Cheng Yu, Mohamad Yousof, Mahsa Mahdavian, Wenying Zhang

    The paper presents the experimental results and proposed design method for the compression strength of the cantilevered leg of cold-formed steel clip angle connectors. The variations of the test specimens included the plate aspect ratio, material thickness, and material strength. The test results were compared to three existing standard design methods for cold-formed steel members similar to the clip angles, but no good agreement was found. A new design method was therefore developed to calculate the nominal compression strength of the cantilevered leg of clip angles. The new method was based on the elastic buckling solution of thin-walled plate columns. The allowable-strength design safety factors, load and resistance factor design, and limit-state design resistance factors were also produced to support the proposed design method.


  • Experiments and Simulations of Cold-Formed Steel Wall Assemblies Using Corrugated Steel Sheathing Subjected to Shear and Gravity Loads

    by Wenying Zhang, Mahsa Mahdavian, Yuanqi Li, Cheng Yu

    The paper presents experimental and numerical investigation of cold-formed steel (CFS)–framed walls sheathed with corrugated steel sheets. The new wall technology is considered as an alternative shear wall configuration for midrise buildings at strong earthquake and high-wind regions because of its attributes of noncombustibility and higher structural performance than the conventional shear wall types. However, design provisions of such corrugated sheathed CFS-framed shear walls have not been included in the current design standards. To establish comprehensive database information and to observe the performance of the bearing wall for the first time, a test program of full-scale wall assemblies using corrugated steel sheathing was conducted. The test specimens included both shear wall specimens and bearing wall specimens under lateral and vertical/gravity loading. In accordance with the full-scale tests, a numerical model was developed in a computer program, and seismic performance assessment was ...


  • Behavior and Design of Thin-Walled Cold-Formed Steel Clip Angles Subjected to Shear Load

    by Cheng Yu, Mohamad Yousof, Mahsa Mahdavian, Wenying Zhang

    Thin-walled cold-formed steel (CFS) clip angles are commonly used to connect CFS framing members or attach CFS members to the main building structure. The design provisions for CFS clip angle connectors have not been included in the AISI design specifications and standards. This paper presents a research project aimed at developing a design method for the thin-walled cold-formed steel load bearing clip angles subjected to shear forces. An extensive test program was conducted to investigate the behavior and shear capacity of clip angles with various dimensions and thicknesses. It was found that the local buckling and the distortional buckling could dominate the failure mechanism dependent on the plate slenderness ratio. Based on the test results, two design methods were developed for determining the nominal shear strength of load bearing clip angles with and without consideration of the clip deformation, respectively. The ASD safety factors and the LRFD resistance factor were also produced to suppo...


  • Seismic Performance of Cold-Formed Steel Framed Buildings Using Corrugated Sheet Shear Walls

    by Wenying Zhang, Jie Wang, Mahsa Mahdavian, Cheng Yu

    Cold-formed steel framed shear wall sheathed with corrugated steel sheets is a promising shear wall system for low- and mid-rise constructions at high wind and seismic zones due to its advantages of non-combustibility, high shear strength, and high shear stiffness. A series of full-scale shear wall tests on corrugated sheet steel shear walls have been conducted at University of North Texas. This paper presents the dynamic model in OPENSEES and incremental dynamic analysis on one two-story and one five-story cold-formed steel framed building. The analysis results provide a systematic assessment of the building performances subjected to earthquake loads.