Mahsa Mahdavian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mahsa Mahdavian has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Cheng Yu
Department of Engineering Technology, University of North Texas, Denton, TX, USA
5 shared publications - Wenying Zhang
Ph.D. Candidate, Dept. of Structural Engineering, Tongji Univ., Shanghai 200092, China
5 shared publications - Mohamad Yousof
Graduate Research Assistant, Dept. of Engineering Technology, Univ. of North Texas, Denton, TX 76207
2 shared publications - Yuanqi Li
Department of Structural Engineering, Tongji University, Shanghai 200092, China
2 shared publications - Jie Wang
Graduate Research Assistant, Dept. of Civil Engineering, Tsinghua Univ., Beijing 100083, China
1 shared publication
Latest Publications
- 1 November 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 143 (11)
Seismic Performance Evaluation of Cold-Formed Steel Shear Walls Using Corrugated Steel Sheathing
Cold-formed steel shear wall with corrugated sheet steel sheathing is a newly proposed lateral force resisting system from recent research work. The advantages of noncombustibility, high shear strength and high shear stiffness enable this new wall system to be a feasible solution for low- and midrise construction at high wind and seismic zones. The design provisions for this new type of shear wall have not been developed in current design specifications. The initial phase of this research project involved the displacement-based testing of bearing wall and shear wall specimens under combined lateral and gravity loading. The phase two research, presented here, includes the nonlinear finite element analysis and the performance evaluation of a set of light framed steel buildings using the corrugated sheet sheathed shear walls. Incremental dynamic analyses were performed on six archetype buildings and seismic performance assessment was evaluated. The results verify a set of seismic performance factors ( and ) for the corrugated sheet sheathed shear wall systems.- 1 November 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 143 (11)
Seismic Performance Evaluation of Cold-Formed Steel Shear Walls Using Corrugated Steel Sheathing
Cold-formed steel shear wall with corrugated sheet steel sheathing is a newly proposed lateral force resisting system from recent research work. The advantages of noncombustibility, high shear strength and high shear stiffness enable this new wall system to be a feasible solution for low- and midrise construction at high wind and seismic zones. The design provisions for this new type of shear wall have not been developed in current design specifications. The initial phase of this research project involved the displacement-based testing of bearing wall and shear wall specimens under combined lateral and gravity loading. The phase two research, presented here, includes the nonlinear finite element analysis and the performance evaluation of a set of light framed steel buildings using the corrugated sheet sheathed shear walls. Incremental dynamic analyses were performed on six archetype buildings and seismic performance assessment was evaluated. The results verify a set of seismic performance factors ( and ) for the corrugated sheet sheathed shear wall systems.- 1 June 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 143 (6)
Design of Cold-Formed Steel Clip Angles in Compression
The paper presents the experimental results and proposed design method for the compression strength of the cantilevered leg of cold-formed steel clip angle connectors. The variations of the test specimens included the plate aspect ratio, material thickness, and material strength. The test results were compared to three existing standard design methods for cold-formed steel members similar to the clip angles, but no good agreement was found. A new design method was therefore developed to calculate the nominal compression strength of the cantilevered leg of clip angles. The new method was based on the elastic buckling solution of thin-walled plate columns. The allowable-strength design safety factors, load and resistance factor design, and limit-state design resistance factors were also produced to support the proposed design method.
- 1 June 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 143 (6)
Design of Cold-Formed Steel Clip Angles in Compression
The paper presents the experimental results and proposed design method for the compression strength of the cantilevered leg of cold-formed steel clip angle connectors. The variations of the test specimens included the plate aspect ratio, material thickness, and material strength. The test results were compared to three existing standard design methods for cold-formed steel members similar to the clip angles, but no good agreement was found. A new design method was therefore developed to calculate the nominal compression strength of the cantilevered leg of clip angles. The new method was based on the elastic buckling solution of thin-walled plate columns. The allowable-strength design safety factors, load and resistance factor design, and limit-state design resistance factors were also produced to support the proposed design method.
- 1 March 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 143 (3)
Experiments and Simulations of Cold-Formed Steel Wall Assemblies Using Corrugated Steel Sheathing Subjected to Shear and Gravity Loads
The paper presents experimental and numerical investigation of cold-formed steel (CFS)–framed walls sheathed with corrugated steel sheets. The new wall technology is considered as an alternative shear wall configuration for midrise buildings at strong earthquake and high-wind regions because of its attributes of noncombustibility and higher structural performance than the conventional shear wall types. However, design provisions of such corrugated sheathed CFS-framed shear walls have not been included in the current design standards. To establish comprehensive database information and to observe the performance of the bearing wall for the first time, a test program of full-scale wall assemblies using corrugated steel sheathing was conducted. The test specimens included both shear wall specimens and bearing wall specimens under lateral and vertical/gravity loading. In accordance with the full-scale tests, a numerical model was developed in a computer program, and seismic performance assessment was ...
- 1 March 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 143 (3)
Experiments and Simulations of Cold-Formed Steel Wall Assemblies Using Corrugated Steel Sheathing Subjected to Shear and Gravity Loads
The paper presents experimental and numerical investigation of cold-formed steel (CFS)–framed walls sheathed with corrugated steel sheets. The new wall technology is considered as an alternative shear wall configuration for midrise buildings at strong earthquake and high-wind regions because of its attributes of noncombustibility and higher structural performance than the conventional shear wall types. However, design provisions of such corrugated sheathed CFS-framed shear walls have not been included in the current design standards. To establish comprehensive database information and to observe the performance of the bearing wall for the first time, a test program of full-scale wall assemblies using corrugated steel sheathing was conducted. The test specimens included both shear wall specimens and bearing wall specimens under lateral and vertical/gravity loading. In accordance with the full-scale tests, a numerical model was developed in a computer program, and seismic performance assessment was ...
- 1 July 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 142 (7)
Behavior and Design of Thin-Walled Cold-Formed Steel Clip Angles Subjected to Shear Load
Thin-walled cold-formed steel (CFS) clip angles are commonly used to connect CFS framing members or attach CFS members to the main building structure. The design provisions for CFS clip angle connectors have not been included in the AISI design specifications and standards. This paper presents a research project aimed at developing a design method for the thin-walled cold-formed steel load bearing clip angles subjected to shear forces. An extensive test program was conducted to investigate the behavior and shear capacity of clip angles with various dimensions and thicknesses. It was found that the local buckling and the distortional buckling could dominate the failure mechanism dependent on the plate slenderness ratio. Based on the test results, two design methods were developed for determining the nominal shear strength of load bearing clip angles with and without consideration of the clip deformation, respectively. The ASD safety factors and the LRFD resistance factor were also produced to suppo...
- 1 July 2016
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 142 (7)
Behavior and Design of Thin-Walled Cold-Formed Steel Clip Angles Subjected to Shear Load
Thin-walled cold-formed steel (CFS) clip angles are commonly used to connect CFS framing members or attach CFS members to the main building structure. The design provisions for CFS clip angle connectors have not been included in the AISI design specifications and standards. This paper presents a research project aimed at developing a design method for the thin-walled cold-formed steel load bearing clip angles subjected to shear forces. An extensive test program was conducted to investigate the behavior and shear capacity of clip angles with various dimensions and thicknesses. It was found that the local buckling and the distortional buckling could dominate the failure mechanism dependent on the plate slenderness ratio. Based on the test results, two design methods were developed for determining the nominal shear strength of load bearing clip angles with and without consideration of the clip deformation, respectively. The ASD safety factors and the LRFD resistance factor were also produced to suppo...
- 8 February 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 252-263
Seismic Performance of Cold-Formed Steel Framed Buildings Using Corrugated Sheet Shear Walls
Cold-formed steel framed shear wall sheathed with corrugated steel sheets is a promising shear wall system for low- and mid-rise constructions at high wind and seismic zones due to its advantages of non-combustibility, high shear strength, and high shear stiffness. A series of full-scale shear wall tests on corrugated sheet steel shear walls have been conducted at University of North Texas. This paper presents the dynamic model in OPENSEES and incremental dynamic analysis on one two-story and one five-story cold-formed steel framed building. The analysis results provide a systematic assessment of the building performances subjected to earthquake loads.
- 8 February 2016
- Published by American Society of Civil Engineers (ASCE)
- p. 252-263
Seismic Performance of Cold-Formed Steel Framed Buildings Using Corrugated Sheet Shear Walls
Cold-formed steel framed shear wall sheathed with corrugated steel sheets is a promising shear wall system for low- and mid-rise constructions at high wind and seismic zones due to its advantages of non-combustibility, high shear strength, and high shear stiffness. A series of full-scale shear wall tests on corrugated sheet steel shear walls have been conducted at University of North Texas. This paper presents the dynamic model in OPENSEES and incremental dynamic analysis on one two-story and one five-story cold-formed steel framed building. The analysis results provide a systematic assessment of the building performances subjected to earthquake loads.