CNChiara Nania

Chiara Nania

*This is an algorithmically generated author record based on publicly available information.

Chiara Nania has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Epitaxial Growth and Characterization of 4H-SiC Layer on C-Face and Si-Face Substrates

    by Chiara Nania, Ruggero Anzalone, Domenica Raciti, Nicolò Piluso, Fabiana Vento, Cristiano Calabretta, Andrea Severino

    4H-SiC is a wide-bandgap semiconductor that has become essential for power electronics due to its large bandgap, high critical electric field, and excellent thermal stability. Within the {0001} basal orientation, the two polar surfaces – Si-face and C-face – exhibit distinct behaviours during chemical vapor deposition (CVD) homoepitaxy, with direct implications for device performance and manufacturing. In this work, n -type epitaxial layers were deposited on 150 mm, 4° off-axis Si-face and C-face substrates under identical conditions in a single-wafer hot-wall LP-CVD reactor (T > 1600 °C, P = 3.0 kPa, C/Si = 1.05, silane/propane/ethylene precursors, N₂ doping, HCl additive). Characterization analysis revealed pronounced polarity-dependent differences. AFM analysis showed that C-face epilayers exhibited smoother surfaces and reduced step bunching compared with Si-face layers. Optical and photoluminescence inspections show polarity-dependent defect propagation, with the C-face displaying reduced replication of extended defects under the explored conditions. However, nitrogen incorporation on the C-face orientation was more than 25× higher than Si-face orientation and displayed poor uniformity, highlighting the limited effectiveness of site-competition epitaxy on this orientation. In contrast, the Si-face provides tighter control of doping concentration and lateral uniformity, albeit with higher step bunching and rougher surfaces. These findings emphasize a fundamental trade-off in 4H-SiC homoepitaxy: the C-face offers morphological and structural advantages, while the Si-face ensures superior doping control and process stability. A deeper understanding of these polarity-dependent mechanisms is essential to optimize epitaxial growth strategies and to enable the design of high-performance SiC power devices.

  • Open Access

    Micropipes in SiC Die Observed by Molten KOH Etching

    by Fabiana Vento, Nicolò Piluso, Cristiano Calabretta, Chiara Nania, Domenica Raciti, Ruggero Anzalone, Andrea Severino

    The growing demand for wide-bandgap (WBG) materials in the microelectronics industry has led to increased investment in medium- and high-voltage power products based on SiC technology. SiC offers an excellent balance between high voltage blocking capability, high temperature operation and high switching frequencies [1]. One key step in preparing high-performance devices is improving the growth process of SiC ingot material by Physical Vapor Transport (PVT). Epitaxial growth occurs through the chemical vapor deposition (CVD) method [2]. However, this method is reported to generate extended defects such as Complex Stacking Faults (formerly referred to as carrots) and Polytype Inclusions (formerly referred to as triangles or comets) and propagate defects pre-existing in the bulk material, such as micropipes (MPs) and threading screw dislocations (TSDs), which have a very high killer ratio in SiC devices [3, 4]. In this work, the KOH molten etching method was used to investigate the nature of the defects that caused device failures; Raman spectroscopy was also employed to identify the spectroscopic correspondence of the peaks of interest.

  • Open Access

    Advanced Defects Study and Monitoring in New Generation 4H-SiC Devices

    by Nicolo Piluso, Cristiano Calabretta, Fabiana Vento, Ruggero Anzalone, Chiara Nania, Domenica Raciti, Antonio Rossitto, Alice Lombardo, Mario Coppola, Annalisa Cannizzaro, et al.

    A new design approach on 4H-SiC material is ongoing to improve the electrical performance of devices. As seen in silicon devices, multi-epitaxial growth enhances performance by reducing on-resistance (R on ). However, devices built on SiC face several challenges due to the very low dopant diffusion (e.g. phosphorus and aluminum) and defect evolution during the epitaxial growth. Monitoring defects like prismatic faults, stacking faults, partial dislocations, and micropipes, especially after regrowth, is essential to assess their impact on device performance. Defects with high killer ratio must be closely tracked to understand evolution thereof. In this work, we will show a method for early-stage process characterization and defect root-cause identification through sensitive inspections, effective reviews, and accurate defect classification to detect critical defects in 4H-SiC material when more than one epitaxial step is considered.

  • Open Access

    Unveiling the Role of Crystallographic Defects in SiC Device Reliability with Multi Modal Structural Analysis

    by Cristiano Calabretta, Nicolo Piluso, Ruggero Anzalone, Enzo Fontana, Giovanni Maira, Gabriele Bellocchi, Mario S. Alessandrino, Fabiana Vento, Chiara Nania, Salvatore Adamo, et al.

    The fabrication of high-quality 4H-SiC epitaxial layers for power semiconductor devices involves complex processes including bulk crystal growth, wafer slicing, polishing, and chemical vapor deposition (CVD) epitaxy with precise step-flow control on slightly off-cut Si-face substrates. Despite advances, intrinsic crystallographic defects such as threading dislocations, basal plane dislocations, and stacking faults remain significant challenges, propagating into epitaxial layers and degrading device performance and reliability. This study examines defect types and their impact on 4H-SiC wafers, emphasizing the transition from 150 mm to 200 mm substrates, which introduces increased defect densities and polytype inclusions. Comprehensive defect characterization using advanced microscopy, molten KOH etching, and electrical wafer sorting reveals strong correlations between physical defects—such as micropipes, carrot-like stacking faults, and triangular 3C-SiC inclusions—and device failures, particularly under reliability stress tests like High Temperature Reverse Bias (HTRB). The findings highlight the critical role of substrate quality, epitaxial growth conditions, and defect mapping in improving yield and device robustness. This work underscores the necessity of integrating multi-scale defect inspection and targeted reliability assessments to optimize 4H-SiC power device manufacturing and performance.

  • Open Access

    Evaluation of 4HSiC Epitaxial CVD Process on Different 200 mm Substrates for Power Device Applications

    by Chiara Nania, Domenica Raciti, Cristiano Calabretta, Fabiana Vento, Ruggero Anzalone, Enzo Fontana, Andrea Severino

    The increasing demand for WBG materials like SiC has led STMicroelectronics to expand wafer diameter from 150 mm to 200 mm, enhancing production yield and reducing costs. However, this expansion poses challenges in preserving crystalline quality. This investigation examines the impact of defects on 200 mm wafers, focusing on Total Usable Area (TUA) and electrical performance, particularly in wafers with polytype inclusions and high basal plane dislocation (BPD) density. Although the results for non-standard wafers show a significant reduction in TUA and an increase in electrical failures, the overall distribution of functional and non-functional devices remains stable, indicating process consistency.