NPNicolo Piluso

Nicolo Piluso

*This is an algorithmically generated author record based on publicly available information.

Nicolo Piluso has a total of 92 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Epitaxial Growth and Characterization of 4H-SiC Layer on C-Face and Si-Face Substrates

    by Chiara Nania, Ruggero Anzalone, Domenica Raciti, Nicolò Piluso, Fabiana Vento, Cristiano Calabretta, Andrea Severino

    4H-SiC is a wide-bandgap semiconductor that has become essential for power electronics due to its large bandgap, high critical electric field, and excellent thermal stability. Within the {0001} basal orientation, the two polar surfaces – Si-face and C-face – exhibit distinct behaviours during chemical vapor deposition (CVD) homoepitaxy, with direct implications for device performance and manufacturing. In this work, n -type epitaxial layers were deposited on 150 mm, 4° off-axis Si-face and C-face substrates under identical conditions in a single-wafer hot-wall LP-CVD reactor (T > 1600 °C, P = 3.0 kPa, C/Si = 1.05, silane/propane/ethylene precursors, N₂ doping, HCl additive). Characterization analysis revealed pronounced polarity-dependent differences. AFM analysis showed that C-face epilayers exhibited smoother surfaces and reduced step bunching compared with Si-face layers. Optical and photoluminescence inspections show polarity-dependent defect propagation, with the C-face displaying reduced replication of extended defects under the explored conditions. However, nitrogen incorporation on the C-face orientation was more than 25× higher than Si-face orientation and displayed poor uniformity, highlighting the limited effectiveness of site-competition epitaxy on this orientation. In contrast, the Si-face provides tighter control of doping concentration and lateral uniformity, albeit with higher step bunching and rougher surfaces. These findings emphasize a fundamental trade-off in 4H-SiC homoepitaxy: the C-face offers morphological and structural advantages, while the Si-face ensures superior doping control and process stability. A deeper understanding of these polarity-dependent mechanisms is essential to optimize epitaxial growth strategies and to enable the design of high-performance SiC power devices.

  • Open Access

    Micropipes in SiC Die Observed by Molten KOH Etching

    by Fabiana Vento, Nicolò Piluso, Cristiano Calabretta, Chiara Nania, Domenica Raciti, Ruggero Anzalone, Andrea Severino

    The growing demand for wide-bandgap (WBG) materials in the microelectronics industry has led to increased investment in medium- and high-voltage power products based on SiC technology. SiC offers an excellent balance between high voltage blocking capability, high temperature operation and high switching frequencies [1]. One key step in preparing high-performance devices is improving the growth process of SiC ingot material by Physical Vapor Transport (PVT). Epitaxial growth occurs through the chemical vapor deposition (CVD) method [2]. However, this method is reported to generate extended defects such as Complex Stacking Faults (formerly referred to as carrots) and Polytype Inclusions (formerly referred to as triangles or comets) and propagate defects pre-existing in the bulk material, such as micropipes (MPs) and threading screw dislocations (TSDs), which have a very high killer ratio in SiC devices [3, 4]. In this work, the KOH molten etching method was used to investigate the nature of the defects that caused device failures; Raman spectroscopy was also employed to identify the spectroscopic correspondence of the peaks of interest.

  • Open Access

    Challenges in 1SSF Detection in 4H-SiC Epilayer and Related Failure

    by Cristiano Calabretta, Cettina Bottari, Salvatore Adamo, Beatrice Carbone, Giovanni Maira, Fabiana Vento, Enzo Fontana, Nicolo Piluso, Mario S. Alessandrino, Alfio Russo, et al.

    Basal plane dislocations (BPDs) represent one of the most detrimental defects in 4H-SiC epitaxial wafers, causing forward voltage degradation in bipolar and power FET devices through the formation and expansion of Shockley-type stacking faults (SSFs). This expansion is driven by the recombination-enhanced dislocation glide (REDG) mechanism during forward bias operation. Despite efforts to mitigate BPD effects by converting them into threading edge dislocations (TEDs) via buffer layer engineering, throughout the epitaxial growth SSFs can still nucleate and propagate, particularly under high current injection. This work presents a comprehensive analysis combining electrical characterization, fault localization technique, Scanning Electron Microscopy (SEM) and micro-photoluminescence (μ-PL) to investigate SSF formation, crystallographic features, and their impact on device performance. The results underscore the critical role of advanced diagnostics and epitaxial process optimization in controlling SSF-related degradation and improving the reliability of SiC power devices.

  • Open Access

    Advanced Defects Study and Monitoring in New Generation 4H-SiC Devices

    by Nicolo Piluso, Cristiano Calabretta, Fabiana Vento, Ruggero Anzalone, Chiara Nania, Domenica Raciti, Antonio Rossitto, Alice Lombardo, Mario Coppola, Annalisa Cannizzaro, et al.

    A new design approach on 4H-SiC material is ongoing to improve the electrical performance of devices. As seen in silicon devices, multi-epitaxial growth enhances performance by reducing on-resistance (R on ). However, devices built on SiC face several challenges due to the very low dopant diffusion (e.g. phosphorus and aluminum) and defect evolution during the epitaxial growth. Monitoring defects like prismatic faults, stacking faults, partial dislocations, and micropipes, especially after regrowth, is essential to assess their impact on device performance. Defects with high killer ratio must be closely tracked to understand evolution thereof. In this work, we will show a method for early-stage process characterization and defect root-cause identification through sensitive inspections, effective reviews, and accurate defect classification to detect critical defects in 4H-SiC material when more than one epitaxial step is considered.

  • Open Access

    Unveiling the Role of Crystallographic Defects in SiC Device Reliability with Multi Modal Structural Analysis

    by Cristiano Calabretta, Nicolo Piluso, Ruggero Anzalone, Enzo Fontana, Giovanni Maira, Gabriele Bellocchi, Mario S. Alessandrino, Fabiana Vento, Chiara Nania, Salvatore Adamo, et al.

    The fabrication of high-quality 4H-SiC epitaxial layers for power semiconductor devices involves complex processes including bulk crystal growth, wafer slicing, polishing, and chemical vapor deposition (CVD) epitaxy with precise step-flow control on slightly off-cut Si-face substrates. Despite advances, intrinsic crystallographic defects such as threading dislocations, basal plane dislocations, and stacking faults remain significant challenges, propagating into epitaxial layers and degrading device performance and reliability. This study examines defect types and their impact on 4H-SiC wafers, emphasizing the transition from 150 mm to 200 mm substrates, which introduces increased defect densities and polytype inclusions. Comprehensive defect characterization using advanced microscopy, molten KOH etching, and electrical wafer sorting reveals strong correlations between physical defects—such as micropipes, carrot-like stacking faults, and triangular 3C-SiC inclusions—and device failures, particularly under reliability stress tests like High Temperature Reverse Bias (HTRB). The findings highlight the critical role of substrate quality, epitaxial growth conditions, and defect mapping in improving yield and device robustness. This work underscores the necessity of integrating multi-scale defect inspection and targeted reliability assessments to optimize 4H-SiC power device manufacturing and performance.

  • Open Access

    New Insights in Orientation and Growth of 150 mm GaN on SiC for HEMT

    by Cristiano Calabretta, Nicolo Piluso, Simona Boninelli, Cristophe Iatosti, Emmanuel Roy, Daniele Calabriso, Louise Lilja, Alexandre Ellison, Carlo Riva, Ferdinando Iucolano, et al.

    This work explores the application of gallium nitride (GaN)-based solid-state devices for high-power, high-frequency, and high-temperature technologies. It presents an in-depth study of GaN on semi-insulating SiC substrates. The study demonstrates, through bow range investigation, optical microscopy, and X-ray diffraction (XRD), that by adapting growth parameters from those used for Si substrates to those suitable for SiC substrates, it is possible to achieve high-quality crystalline MOCVD growth both under on-axis and 4°off-axis substrate orientations.

  • Open Access

    Buffer Layer Dependence of Defectivity in 200mm 4H-SiC Homoepitaxy

    by Domenica Raciti, Ruggero Anzalone, Mathias Isacson, Nicolo Piluso, Andrea Severino

    The effect of increasing Buffer Layer (BL) thickness on crystal defectivity has been investigated in 4° off-axis 4H-SiC homoepitaxy on 200mm substrates coming from different suppliers. The results, based on optical microscopy and scatter light methods, show a slight increase in morphological defects in the case of a thicker BL with respect to the standard thickness for both suppliers.


  • Open Access

    Investigation of the Young’s Modulus and the Residual Stress of 4H-SiC Circular Membranes on 4H-SiC Substrates

    by Jaweb Ben Messaoud, Jean-François Michaud, Dominique Certon, Massimo Camarda, Nicolò Piluso, Laurent Colin, Flavien Barcella, Daniel Alquier

    The stress state is a crucial parameter for the design of innovative microelectromechanical systems based on silicon carbide (SiC) material. Hence, mechanical properties of such structures highly depend on the fabrication process. Despite significant progresses in thin-film growth and fabrication process, monitoring the strain of the suspended SiC thin-films is still challenging. However, 3C-SiC membranes on silicon (Si) substrates have been demonstrated, but due to the low quality of the SiC/Si heteroepitaxy, high levels of residual strains were always observed. In order to achieve promising self-standing films with low residual stress, an alternative micromachining technique based on electrochemical etching of high quality homoepitaxy 4H-SiC layers was evaluated. This work is dedicated to the determination of their mechanical properties and more specifically, to the characterization of a 4H-SiC freestanding film with a circular shape. An inverse problem method was implemented, where experimental results obtained from bulge test are fitted with theoretical static load-deflection curves of the stressed membrane. To assess data validity, the dynamic behavior of the membrane was also investigated: Experimentally, by means of laser Doppler vibrometry (LDV) and theoretically, by means of finite element computations. The two methods provided very similar results since one obtained a Young’s modulus of 410 GPa and a residual stress value of 41 MPa from bulge test against 400 GPa and 30 MPa for the LDV analysis. The determined Young’s modulus is in good agreement with literature values. Moreover, residual stress values demonstrate that the fabrication of low-stressed SiC films is achievable thanks to the micromachining process developed.


  • Open Access

    SiCILIA—Silicon Carbide Detectors for Intense Luminosity Investigations and Applications

    by Salvatore Tudisco, Francesco La Via, Clementina Agodi, Carmen Altana, Giacomo Borghi, Maurizio Boscardin, Giancarlo Bussolino, Lucia Calcagno, Massimo Camarda, Francesco Cappuzzello, et al.

    Silicon carbide (SiC) is a compound semiconductor, which is considered as a possible alternative to silicon for particles and photons detection. Its characteristics make it very promising for the next generation of nuclear and particle physics experiments at high beam luminosity. Silicon Carbide detectors for Intense Luminosity Investigations and Applications (SiCILIA) is a project starting as a collaboration between the Italian National Institute of Nuclear Physics (INFN) and IMM-CNR, aiming at the realization of innovative detection systems based on SiC. In this paper, we discuss the main features of silicon carbide as a material and its potential application in the field of particles and photons detectors, the project structure and the strategies used for the prototype realization, and the first results concerning prototype production and their performance.