Vladimir A. Perfilov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vladimir A. Perfilov has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- D. A. Lyashenko
Volgograd State Technical University
2 shared publications - Olga V. Dushko
Волгоградский государственный технический университет (ВолгГТУ)
2 shared publications - Д. А. Ляшенко
Volgograd State Technical University (VSTU)
2 shared publications - Artem Igorevich Bogdanov
Materials Science and Composite Materials Department, Volgograd State Technical University, 400005 Volgograd, Russia
1 shared publication E. Yu. Dubtsova
Volgograd State Technical University
1 shared publicationI A Tomareva
Volgograd State Technical University, Lenin avenue 28, Volgograd 400005, Russia
1 shared publication
Latest Publications
- 22 April 2026
- Published by Volgograd State Technical University in Izvestia Volgograd State Technical University
- No. 4(311)
SYNTHESIS OF A KINEMATIC ALGORITHM FOR CONTROLLING THE MACHINE OF AN AGGREGATE FOR THE CONSTRUCTION OF A PILE FOUNDATION
The design of an automated loading and transport unit is proposed. The technological process of loading, transporting and driving piles is described. The kinematic calculation of the manipulation device is carried out. The problem of positioning the pile when moving it from the transport position to the installation location has been solved. The dependence of the rotation angles of the manipulator links on time is presented.
- 22 April 2026
- Published by Volgograd State Technical University in Izvestia Volgograd State Technical University
- No. 4(311)
SYNTHESIS OF A KINEMATIC ALGORITHM FOR CONTROLLING THE MACHINE OF AN AGGREGATE FOR THE CONSTRUCTION OF A PILE FOUNDATION
The design of an automated loading and transport unit is proposed. The technological process of loading, transporting and driving piles is described. The kinematic calculation of the manipulation device is carried out. The problem of positioning the pile when moving it from the transport position to the installation location has been solved. The dependence of the rotation angles of the manipulator links on time is presented.
- 1 January 2025
- Published by Volgograd State Technical University in ВЕСТНИК ВОЛГОГРАДСКОГО ГОСУДАРСТВЕННОГО АРХИТЕКТУРНО-СТРОИТЕЛЬНОГО УНИВЕРСИТЕТА
- No. 2,p. 51-58
The effect of the combined use of nanomodifiers and steel fiber on the properties of concrete
The article provides literature data on the use of various types of fiber and their effect on the performance properties of concrete. The work investigated the effect of the combined use of the nanomodifying additive TAUNIT-M, superplasticizer SP-3 and steel fiber MIXARM with a diameter of 1 mm and a length of up to 54 mm. The dependence of the strength characteristics of concrete on the amount of injected steel fiber has been established. An improvement in the intensity of concrete strength gain in the early stages of hardening has been established, depending on the complex nanomodifying additive being introduced
- 1 January 2025
- Published by Volgograd State Technical University in ВЕСТНИК ВОЛГОГРАДСКОГО ГОСУДАРСТВЕННОГО АРХИТЕКТУРНО-СТРОИТЕЛЬНОГО УНИВЕРСИТЕТА
- No. 2,p. 51-58
The effect of the combined use of nanomodifiers and steel fiber on the properties of concrete
The article provides literature data on the use of various types of fiber and their effect on the performance properties of concrete. The work investigated the effect of the combined use of the nanomodifying additive TAUNIT-M, superplasticizer SP-3 and steel fiber MIXARM with a diameter of 1 mm and a length of up to 54 mm. The dependence of the strength characteristics of concrete on the amount of injected steel fiber has been established. An improvement in the intensity of concrete strength gain in the early stages of hardening has been established, depending on the complex nanomodifying additive being introduced
- 9 October 2024
- Published by Stroymaterialy in Construction Materials
- No. 9,p. 58-62
Method for introducing carbon nanotubes into fine-grained concrete
This work discusses the use of a modifying complex additive to concrete with the inclusion of carbon nanotubes “Taunit-M” and the SP-3 plasticizer. Two methods of introducing nano-sized additives into the composition of fine-grained concrete, as well as their combination, are considered. The results of a series of tests of beam samples aged 28 days are presented using two methods of introducing nanotubes, namely: the use of an ultrasonic dispersant and the use of a linear induction rotator (LIR). The positive effect of introducing nanotubes on the strength characteristics of concrete has been established. It has been determined that the use of LIR technology provides an increase in strength due to a double effect: activation of the cement binder and distribution of the nanoadditive using active mixing due to vortex action. Ultrasonic dispersion, in turn, ensures the effective introduction of the plasticizer into the mixing water.
- 9 October 2024
- Published by Stroymaterialy in Construction Materials
- No. 9,p. 58-62
Method for introducing carbon nanotubes into fine-grained concrete
This work discusses the use of a modifying complex additive to concrete with the inclusion of carbon nanotubes “Taunit-M” and the SP-3 plasticizer. Two methods of introducing nano-sized additives into the composition of fine-grained concrete, as well as their combination, are considered. The results of a series of tests of beam samples aged 28 days are presented using two methods of introducing nanotubes, namely: the use of an ultrasonic dispersant and the use of a linear induction rotator (LIR). The positive effect of introducing nanotubes on the strength characteristics of concrete has been established. It has been determined that the use of LIR technology provides an increase in strength due to a double effect: activation of the cement binder and distribution of the nanoadditive using active mixing due to vortex action. Ultrasonic dispersion, in turn, ensures the effective introduction of the plasticizer into the mixing water.
- Open Access
- 1 August 2024
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 19 (7) , 1116-1124
Наномодифицированная цементная композиция
Наномодифицированная цементная композиция
- 1 August 2024
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 19 (7) , 1116-1124
Open AccessНаномодифицированная цементная композиция
Наномодифицированная цементная композиция
- Open Access
- 1 July 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1967 (1) , 012056
Effects of various factors on concrete strength and crack-resistance
This paper reviews the methods for evaluation of strength and crack-resistance from the perspective of fracture mechanics and slow expansion of the most dangerous main cracks. Complete concrete stress-deformation and destruction diagrams with the fracture work and energy evaluation have been obtained through testing as well as the force parameter such as the critical stress intensity ratio has been determined. The analysis of test results has proved that crack-resistance of concrete can change depending on the type, size and volumetric content of the aggregate and also on the water-cement ratio, age, hardening conditions and heating temperature of concrete.
- 1 July 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1967 (1) , 012056
Open AccessEffects of various factors on concrete strength and crack-resistance
This paper reviews the methods for evaluation of strength and crack-resistance from the perspective of fracture mechanics and slow expansion of the most dangerous main cracks. Complete concrete stress-deformation and destruction diagrams with the fracture work and energy evaluation have been obtained through testing as well as the force parameter such as the critical stress intensity ratio has been determined. The analysis of test results has proved that crack-resistance of concrete can change depending on the type, size and volumetric content of the aggregate and also on the water-cement ratio, age, hardening conditions and heating temperature of concrete.
- Open Access
- 1 November 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 962 (2) , 022016
Acoustic method for measurement of crack width in concrete
The article presents the results of research and experimental studies aimed at measurement of crack width in concrete under the impact of mechanical loading. During the research, the author simultaneously measured load, deformation, crack width, acoustic emission gross counting by tensiometric and acoustic methods and obtained full diagrams of concrete deformation. The experiments resulted in regression equations and their combined diagrams showing relation between acoustic emission gross counting and mechanical loading level. The author identified the parameters of macro-crack initiation and their width in lightweight concrete depending on the value of the applied load. The conducted experiments and statistic processing of the data produced the correlation between the crack width and acoustic emission gross counting.
- 1 November 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 962 (2) , 022016
Open AccessAcoustic method for measurement of crack width in concrete
The article presents the results of research and experimental studies aimed at measurement of crack width in concrete under the impact of mechanical loading. During the research, the author simultaneously measured load, deformation, crack width, acoustic emission gross counting by tensiometric and acoustic methods and obtained full diagrams of concrete deformation. The experiments resulted in regression equations and their combined diagrams showing relation between acoustic emission gross counting and mechanical loading level. The author identified the parameters of macro-crack initiation and their width in lightweight concrete depending on the value of the applied load. The conducted experiments and statistic processing of the data produced the correlation between the crack width and acoustic emission gross counting.
- Open Access
- 1 November 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 962 (2) , 022018
Measurement of crack growth speed in concrete by acoustic emission and mechanics of damage methods
The article presents the results of research and experimental studies aimed at measurement of crack growth speed in concrete of different types and composition. The study included complex methods to measure the parameters of concrete destruction under the impact of mechanic loads and aggressive factors. The experiments were performed using mechanics of damage methods and acoustic measurement of such parameters as acoustic emission gross counting and counting rate. The experiments resulted in regression equations showing change of acoustic emission gross counting depending on the speed of a specimen loading. Data on slow growth of cracks in heat-resistant concrete during heating up to 800°C have been obtained by acoustic emission and mechanics of damage methods. The performed studies and statistic processing of the obtained data allowed identifying that parameters of acoustic emission are directly related to the characteristics of mechanics of damage that reveals a considerable capacity of acoustic emission as a method for forecasting destruction of concrete.
- 1 November 2020
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 962 (2) , 022018
Open AccessMeasurement of crack growth speed in concrete by acoustic emission and mechanics of damage methods
The article presents the results of research and experimental studies aimed at measurement of crack growth speed in concrete of different types and composition. The study included complex methods to measure the parameters of concrete destruction under the impact of mechanic loads and aggressive factors. The experiments were performed using mechanics of damage methods and acoustic measurement of such parameters as acoustic emission gross counting and counting rate. The experiments resulted in regression equations showing change of acoustic emission gross counting depending on the speed of a specimen loading. Data on slow growth of cracks in heat-resistant concrete during heating up to 800°C have been obtained by acoustic emission and mechanics of damage methods. The performed studies and statistic processing of the obtained data allowed identifying that parameters of acoustic emission are directly related to the characteristics of mechanics of damage that reveals a considerable capacity of acoustic emission as a method for forecasting destruction of concrete.
- Open Access
- 1 December 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 687 (2) , 022013
Fine-aggregate concrete with polymer and basalt fiber
The article covers the results of research and experimental studies aimed at determination of the impact of polymer and basalt fibre as well as plasticizing agents on the properties of fine-aggregate concrete. The authors identified the physical and mechanical properties of fine-aggregate fibre-reinforced concrete depending on the amount of basalt and polymer fibres. The article also dwells on the impact of different plasticizing agents on the properties of fine-aggregate fibre-reinforced concrete. It was determined that the optimal concentration of polymer and basalt fibre is 0.9-1.0 kg/m3 when maximum compression strength and tension in bending have been reached. The authors managed to select efficient superplasticizing agents Sika ViscoCrete 5-800 and POLIPLAST SP-4 which provided maximum increase in strength of fine-aggregate concrete. It was determined that the use of polymer and basalt fibres ensures increase in strength and crack resistance of the obtained fire-aggregate concrete compositions.
- 1 December 2019
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 687 (2) , 022013
Open AccessFine-aggregate concrete with polymer and basalt fiber
The article covers the results of research and experimental studies aimed at determination of the impact of polymer and basalt fibre as well as plasticizing agents on the properties of fine-aggregate concrete. The authors identified the physical and mechanical properties of fine-aggregate fibre-reinforced concrete depending on the amount of basalt and polymer fibres. The article also dwells on the impact of different plasticizing agents on the properties of fine-aggregate fibre-reinforced concrete. It was determined that the optimal concentration of polymer and basalt fibre is 0.9-1.0 kg/m3 when maximum compression strength and tension in bending have been reached. The authors managed to select efficient superplasticizing agents Sika ViscoCrete 5-800 and POLIPLAST SP-4 which provided maximum increase in strength of fine-aggregate concrete. It was determined that the use of polymer and basalt fibres ensures increase in strength and crack resistance of the obtained fire-aggregate concrete compositions.
- Open Access
- 1 June 2019
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 272 (3) , 032080
Strength and Fracture Toughness of Heat-Resistant Fiber-Reinforced Concrete
A technique is proposed for determining the critical length of a main crack in concretes at different loading rates. A composition of light, heat-resistant fiber-reinforced concrete of increased strength and crack resistance, which does not require heat treatment, has been developed. The effect of high temperatures on the change in the strength and fracture resistance of heat-resistant heavy and light concretes was studied.
- 1 June 2019
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 272 (3) , 032080
Open AccessStrength and Fracture Toughness of Heat-Resistant Fiber-Reinforced Concrete
A technique is proposed for determining the critical length of a main crack in concretes at different loading rates. A composition of light, heat-resistant fiber-reinforced concrete of increased strength and crack resistance, which does not require heat treatment, has been developed. The effect of high temperatures on the change in the strength and fracture resistance of heat-resistant heavy and light concretes was studied.