Kodji Deli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Kodji Deli has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Dieudonné Kaoga Kidmo
Affiliation Department of Renewable Energy, University of Maroua, National Advanced School of Engineering of Maroua, Maroua, Cameroon
4 shared publications - Bachirou Bogno
Affiliations Faculty of Science, University of Garoua, Cameroon, Garoua, Cameroon, Laboratoire Matériaux Optiques, Photonique et Systèmes (LMOPS), Université de Lorraine & CentraleSupélec, Metz, France
3 shared publications - Etienne Tchoffo Houdji
Advanced School of Mines Processing and Energy Resources, The University of Bertoua, PO Box 416, Bertoua, Cameroon
3 shared publications - Noël Djongyang
Department of Renewable Energy, National Advanced School of Engineering of Maroua, University of Maroua, Maroua, Cameroon
3 shared publications - Albert Ayang
Department of Renewable Energy, National Advanced School of Engineering, University of Maroua, Maroua, Cameroon
2 shared publications - Michel Aillerie
Affiliation Laboratoire Matériaux Optiques, Photonique et Systèmes (LMOPS), Université de Lorraine & CentraleSupélec, Metz, France
2 shared publications
Latest Publications
- Open Access
- 17 May 2024
- Published by Science Publishing Group in International Journal of Sustainable and Green Energy
- Vol. 13 (2) , 28-42
Performance Comparison of Empirical Models for Estimating Global Solar Irradiation in the Soudano-Sahelian Zone of Cameroon: The Case of the City of Maroua and Garoua
The main objective of this study is to compare thirty-five (35) solar radiation models available in the open literature in order to predict monthly solar radiation in two main cities of Cameroon. This estimation and comparison are based on selected statistical comparison parameters named, root mean square error (RMSE), mean bias error (MBE), mean percentage error (MPE) and determination coefficient (R 2 ). These different models are implemented using regression analysis tools named Exel and MATLAB. Estimated values were compared with measured values according to normalized values of statistical parameters, using measured meteorological data of more than 19 years, from 1984 to 2015. All the models have been classified with their associated ranking according to their statistical parameter accuracy. From this study it appears that the models of Ertekin and Yaldiz (MOD20), Togrul and Onat (MOD28), are more accurate than other models. Indeed, for the city of Maroua (MBE%=-2.82E-14; RMSE%=0.862; MPE=-0.00845; R 2 =0.985), while for Garoua (MBE%=-9.21E-15; RMSE%=0.806; MPE=-0.00631; R 2 =0.959). according to their accuracy these models can be therefore be used to predict monthly solar radiation for soudano-sahelian regions of Cameroon. Correlation equations found in this paper will help solar energy researcher to estimate data with trust because of its fine agreement with the observed one. hence the models presented in this study could be used to evaluate accurately the solar radiation at any locations with similar climate.
- 17 May 2024
- Published by Science Publishing Group in International Journal of Sustainable and Green Energy
- Vol. 13 (2) , 28-42
Open AccessPerformance Comparison of Empirical Models for Estimating Global Solar Irradiation in the Soudano-Sahelian Zone of Cameroon: The Case of the City of Maroua and Garoua
The main objective of this study is to compare thirty-five (35) solar radiation models available in the open literature in order to predict monthly solar radiation in two main cities of Cameroon. This estimation and comparison are based on selected statistical comparison parameters named, root mean square error (RMSE), mean bias error (MBE), mean percentage error (MPE) and determination coefficient (R 2 ). These different models are implemented using regression analysis tools named Exel and MATLAB. Estimated values were compared with measured values according to normalized values of statistical parameters, using measured meteorological data of more than 19 years, from 1984 to 2015. All the models have been classified with their associated ranking according to their statistical parameter accuracy. From this study it appears that the models of Ertekin and Yaldiz (MOD20), Togrul and Onat (MOD28), are more accurate than other models. Indeed, for the city of Maroua (MBE%=-2.82E-14; RMSE%=0.862; MPE=-0.00845; R 2 =0.985), while for Garoua (MBE%=-9.21E-15; RMSE%=0.806; MPE=-0.00631; R 2 =0.959). according to their accuracy these models can be therefore be used to predict monthly solar radiation for soudano-sahelian regions of Cameroon. Correlation equations found in this paper will help solar energy researcher to estimate data with trust because of its fine agreement with the observed one. hence the models presented in this study could be used to evaluate accurately the solar radiation at any locations with similar climate.
- Open Access
- 1 November 2021
- Published by Elsevier in Energy Reports
- Vol. 7, 780-797
Prospects of hydropower for electricity generation in the East Region of Cameroon
- 1 November 2021
- Published by Elsevier in Energy Reports
- Vol. 7, 780-797
Open AccessProspects of hydropower for electricity generation in the East Region of Cameroon
- Open Access
- 7 April 2021
- Published by EDP Sciences in Renewable Energy and Environmental Sustainability
- Vol. 6, 6
Economic assessment of WECS for water pumping systems in the North Region of Cameroon
This paper analyses the potential utilization of wind electric pumping for water distribution in off-grid locations of the North Region of Cameroon (NRoC), using ground measured data as well as long-term satellite-derived data. Furthermore, this paper puts emphasis on statistical indexes of accuracy for the comparison of measured (2007–2012) and long-term satellite-derived (2005–2020) data. The outcome of this study clearly indicates that long-term satellite-derived data, obtained through the Prediction of Worldwide Renewable Energy Resources, can be considered as a viable alternative to missing site-specific data from ground stations, mainly in developing countries. The accuracy of satellite-based wind resource is deemed sufficient to provide a reasonable assessment in the initial phase of wind project planning, before in situ measurements with high accuracy are available. To model wind speeds characteristics, the energy pattern factor method (EPF) has been utilized as one of the reliable Weibull distribution methods for the assessment of wind energy potential at desired turbines heights in the selected locations. Five 20-kW pitch-controlled wind turbines (WT) with a hub height of 30 m, are considered to evaluate the power output and energy produced. Volumetric flow rates and costs of water produced are estimated. The results showed that, out of the eight chosen locations, Figuil shows the best combination of capacity factors (CF) and costs of energy (COE), while the site of Poli displays the worst values of CF and COE, no matter which of the five WT is employed. Thus, selecting WT for low wind speeds regimes, should require to combine location wind resource and WT characteristics such as lower cut-in wind speed (1.5 m/s) as well as lower rated wind speed (8.0 m/s) in order to successfully and affordably implement the wind technology in the NRoC.
- 7 April 2021
- Published by EDP Sciences in Renewable Energy and Environmental Sustainability
- Vol. 6, 6
Open AccessEconomic assessment of WECS for water pumping systems in the North Region of Cameroon
This paper analyses the potential utilization of wind electric pumping for water distribution in off-grid locations of the North Region of Cameroon (NRoC), using ground measured data as well as long-term satellite-derived data. Furthermore, this paper puts emphasis on statistical indexes of accuracy for the comparison of measured (2007–2012) and long-term satellite-derived (2005–2020) data. The outcome of this study clearly indicates that long-term satellite-derived data, obtained through the Prediction of Worldwide Renewable Energy Resources, can be considered as a viable alternative to missing site-specific data from ground stations, mainly in developing countries. The accuracy of satellite-based wind resource is deemed sufficient to provide a reasonable assessment in the initial phase of wind project planning, before in situ measurements with high accuracy are available. To model wind speeds characteristics, the energy pattern factor method (EPF) has been utilized as one of the reliable Weibull distribution methods for the assessment of wind energy potential at desired turbines heights in the selected locations. Five 20-kW pitch-controlled wind turbines (WT) with a hub height of 30 m, are considered to evaluate the power output and energy produced. Volumetric flow rates and costs of water produced are estimated. The results showed that, out of the eight chosen locations, Figuil shows the best combination of capacity factors (CF) and costs of energy (COE), while the site of Poli displays the worst values of CF and COE, no matter which of the five WT is employed. Thus, selecting WT for low wind speeds regimes, should require to combine location wind resource and WT characteristics such as lower cut-in wind speed (1.5 m/s) as well as lower rated wind speed (8.0 m/s) in order to successfully and affordably implement the wind technology in the NRoC.
- Open Access
- 17 February 2021
- Published by EDP Sciences in Renewable Energy and Environmental Sustainability
- Vol. 6, 2
Status of renewable energy in Cameroon
Globally, the continuous increase of energy consumption coupled with the depletion of the limited fossil fuel sources and their negative impacts on the environment, has shifted focus towards renewables for a sustainable development. For the last fifteen years, the world has enjoyed renewables generation capacity increases in a double-digit Terawatt-hours range. Although renewables consumption is fast developing in Asia Pacific, Europe and North America, significant coordination efforts are required among stakeholders in sub-Saharan Africans countries such as Cameroon. In 2018, the total final energy consumption in Cameroon was 7.41 Mtoe, 74.22% of which was from biomass, 18.48% from fossil fuels and 7.30% from electricity. Furthermore, 6977 GWh of electricity was produced, 78.29% of which from the major electricity operator (ENEO S.A. Cameroon) and 21.71% from independent producers (GLOBELEQ, ALTAAQA Sinohydro China and AGGREKO). More than three quarter of electricity produced were consumed by industry (57.04%) and residential (20.74%) sectors. The country's installed electricity generation capacity rose to 1402 MW, 56.15% of which was from hydropower, 43.84% from fossil fuels (17.55% from natural gas and 26.29% from oil) and 0.01% from solar photovoltaic. The promotion of renewable energy is an important part of Cameroon's plan to increase energy security and provide job opportunities to the country. Yet, the lack of proactive and long-term renewable energy policy and laws, in addition to less attention paid to renewable energy training and research, financing mechanisms, and unaffordable costs of renewable energy technologies to the poor population are amongst present issues hindering the development of renewable energy in the country. Hence, this paper aims to highlight the present status of renewable energy exploitation and development in Cameroon.
- 17 February 2021
- Published by EDP Sciences in Renewable Energy and Environmental Sustainability
- Vol. 6, 2
Open AccessStatus of renewable energy in Cameroon
Globally, the continuous increase of energy consumption coupled with the depletion of the limited fossil fuel sources and their negative impacts on the environment, has shifted focus towards renewables for a sustainable development. For the last fifteen years, the world has enjoyed renewables generation capacity increases in a double-digit Terawatt-hours range. Although renewables consumption is fast developing in Asia Pacific, Europe and North America, significant coordination efforts are required among stakeholders in sub-Saharan Africans countries such as Cameroon. In 2018, the total final energy consumption in Cameroon was 7.41 Mtoe, 74.22% of which was from biomass, 18.48% from fossil fuels and 7.30% from electricity. Furthermore, 6977 GWh of electricity was produced, 78.29% of which from the major electricity operator (ENEO S.A. Cameroon) and 21.71% from independent producers (GLOBELEQ, ALTAAQA Sinohydro China and AGGREKO). More than three quarter of electricity produced were consumed by industry (57.04%) and residential (20.74%) sectors. The country's installed electricity generation capacity rose to 1402 MW, 56.15% of which was from hydropower, 43.84% from fossil fuels (17.55% from natural gas and 26.29% from oil) and 0.01% from solar photovoltaic. The promotion of renewable energy is an important part of Cameroon's plan to increase energy security and provide job opportunities to the country. Yet, the lack of proactive and long-term renewable energy policy and laws, in addition to less attention paid to renewable energy training and research, financing mechanisms, and unaffordable costs of renewable energy technologies to the poor population are amongst present issues hindering the development of renewable energy in the country. Hence, this paper aims to highlight the present status of renewable energy exploitation and development in Cameroon.
- Open Access
- 30 September 2018
- Published by Centre de Developpement des Energie Renouvelables in Journal of Renewable Energies
- Vol. 21 (3) , 455-472
An investigation of incremental conductance based maximum power point tracking for photovoltaic water pumping system performances
In this work, each components of the photovoltaic water pumping system have been modeled in the Matlab/Simulink platform using meteorological data obtained from the field for the specific month corresponding to the hottest one of the year and for different total heads or pump loads. Optimization is done using the incremental conductance MPPT techniques which help to track the maximum power available in the photovoltaic module at each time and then feed the pump with optimal power. The results of this simulations show the effectiveness of the optimized system compare to the direct-coupled one. For the considered water pumps, daily flow rates are predicted and permit to calculate monthly total volume of water which is in the range of 122 m3 to 200 m3 for the total heads in the range of 60 m to 24 m with optimization and in the range of 12 m3 to 43 m3 for the same range of total heads without optimization. This study also shows the relevance of the optimized system compare to the direct-coupled system for providing water in rural areas of soudano-sahelian zone of Cameroon.
- 30 September 2018
- Published by Centre de Developpement des Energie Renouvelables in Journal of Renewable Energies
- Vol. 21 (3) , 455-472
Open AccessAn investigation of incremental conductance based maximum power point tracking for photovoltaic water pumping system performances
In this work, each components of the photovoltaic water pumping system have been modeled in the Matlab/Simulink platform using meteorological data obtained from the field for the specific month corresponding to the hottest one of the year and for different total heads or pump loads. Optimization is done using the incremental conductance MPPT techniques which help to track the maximum power available in the photovoltaic module at each time and then feed the pump with optimal power. The results of this simulations show the effectiveness of the optimized system compare to the direct-coupled one. For the considered water pumps, daily flow rates are predicted and permit to calculate monthly total volume of water which is in the range of 122 m3 to 200 m3 for the total heads in the range of 60 m to 24 m with optimization and in the range of 12 m3 to 43 m3 for the same range of total heads without optimization. This study also shows the relevance of the optimized system compare to the direct-coupled system for providing water in rural areas of soudano-sahelian zone of Cameroon.
- Open Access
- 23 February 2018
- Published by Science Publishing Group in International Journal of Electrical Components and Energy Conversion
- Vol. 4 (1) , 61-71
A Rainy Month Performance Evaluation of Photovoltaic Module and Performance Prediction of the PV Water Pumping Systems Under Soudano Sahelian Climate
The purpose of this paper is to evaluate the energy yield of the photovoltaic module during the worst case conditions in Soudano Sahelian climate in order to predict real time worst performance of a PV water pumping systems in two stations in soudano-sahelian zone of Cameroon. a simple model has been developed with experimental data of electrical energy delivered by PV module for estimating the performance of a photovoltaic (PV) water pumping systems, this work is made possible using 5-min intervals of measured performance data (ambient temperature, current, voltage) for the month of August using the optimum fixed tilt angle of the PV array. The method is validated by predicting the performance of two PV pumping systems installed in an isolated site in Agola and Dorigué. The daily and the monthly flow rate of the systems predicted by the method are evaluated.
- 23 February 2018
- Published by Science Publishing Group in International Journal of Electrical Components and Energy Conversion
- Vol. 4 (1) , 61-71
Open AccessA Rainy Month Performance Evaluation of Photovoltaic Module and Performance Prediction of the PV Water Pumping Systems Under Soudano Sahelian Climate
The purpose of this paper is to evaluate the energy yield of the photovoltaic module during the worst case conditions in Soudano Sahelian climate in order to predict real time worst performance of a PV water pumping systems in two stations in soudano-sahelian zone of Cameroon. a simple model has been developed with experimental data of electrical energy delivered by PV module for estimating the performance of a photovoltaic (PV) water pumping systems, this work is made possible using 5-min intervals of measured performance data (ambient temperature, current, voltage) for the month of August using the optimum fixed tilt angle of the PV array. The method is validated by predicting the performance of two PV pumping systems installed in an isolated site in Agola and Dorigué. The daily and the monthly flow rate of the systems predicted by the method are evaluated.
- 4 July 2017
- Published by Taylor & Francis in African Journal of Science, Technology, Innovation and Development
- Vol. 9 (4) , 437-448
Operation and maintenance of back-up photovoltaic systems: An analysis based on a field study in Cameroon
- 4 July 2017
- Published by Taylor & Francis in African Journal of Science, Technology, Innovation and Development
- Vol. 9 (4) , 437-448
Operation and maintenance of back-up photovoltaic systems: An analysis based on a field study in Cameroon
- Open Access
- 1 August 2016
- Published by Elsevier in Energy Procedia
- Vol. 93, 66-73
Wind Energy for Electricity Generation in the Far North Region of Cameroon
- 1 August 2016
- Published by Elsevier in Energy Procedia
- Vol. 93, 66-73
Open AccessWind Energy for Electricity Generation in the Far North Region of Cameroon