KMKhalegh Mozaffari

Khalegh Mozaffari

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Khalegh Mozaffari has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Parallel Capacitive-Link Universal Converters With Low Current Stress and High Efficiency

    by Junhao Luo, Khalegh Mozaffari, Brad Lehman, Mahshid Amirabadi

    Series capacitive-link universal converters are a relatively new class of single-stage power converters that offer numerous advantages including high reliability, high power density, and high efficiency. However, one of the limitations of these converters is high current stress of the switches, which lowers their efficiency especially in high current applications. In this paper, a new class of soft-/hard-switched parallel capacitivelink converters is introduced to address this limitation of the series capacitive-link universal converter while keeping its advantages. Apart from providing bidirectional power transfer, the proposed ac–ac converter can implement voltage stepping up/down as well as frequency transformation. A small film capacitor, which is placed in parallel with the input and output switch bridges, is responsible for transferring the power from input towards output. A small inductor can be placed in series with the link capacitor to realize zero-current-switching (ZCS) for all the switches under any load conditions, which lowers the switching losses and reduces EMI. The proposed parallel capacitive-link converter is expected to offer an enhanced efficiency and reduced current stress compared to the series capacitive-link universal converters. In this paper, principles of the operation of the proposed converter are presented, and its performance and advantages are verified by simulation and experiment.


  • A Reduced-Switch-Count Family of Soft-Switched High-Frequency Inductive AC-Link Converters

    by Khalegh Mozaffari, Mahshid Amirabadi

    This paper introduces a new family of partial-resonance high-frequency ac-link converters with reduced number of switches, which contributes to enhanced reliability and reduced size. The proposed family of converters can be configured to interface various number of single/multi-port dc and/or single/multi-phase ac systems of sources and loads through a partial-resonance parallel LC link composing of a small inductor and very small ac capacitor without the use of bulky and short life-cycle electrolytic capacitors. The high-frequency ac-link is responsible for transferring power between different ports of the system entirely or partially as well as realizing zero-voltage-switching (ZVS) for all the power switches/diodes over the full load range, which results in minimized stress over the switches and low electromagnetic interference (EMI). This class of converters, which only employs two-quadrant switches, is inherently bidirectional with voltage step-up/down capability. It allows variable frequencies and power factors between the input and output terminals in one stage of power conversion. The proposed converters can function in buck-boost, buck, and/or boost modes of operation to step up and/or down the input voltage. Functioning in buck or boost modes of operation can significantly reduce the link peak current and voltage, contributing to reduced power-loss, size of components, voltage/current stress of power switches/diodes, and EMI.


  • A Versatile Family of Partial-Resonance Inductive-AC-Link Universal Converters

    by Khalegh Mozaffari, Mahshid Amirabadi

    In this paper, a new class of universal power converters is presented. The proposed family can interface numerous single-phase or multi-phase sources and loads without limitation in their forms (ac/dc). In this converter a small inductor placed in series with the input and output switch-bridges forms the link. This small link inductor is responsible for transferring power between different ports of the system. The proposed topologies can operate in buck, boost, and buck-boost modes of operation to step up and/or down the voltage. In buck-boost mode of operation the converter is controlled such that the power is entirely transferred through the link inductor; whereas, in buck or boost modes of operation only a fraction of the power is transferred through the link inductor, and the remaining power is directly transferred from input phases to the output phases. Galvanic isolation can be provided by means of a compact and lightweight single-phase high-frequency transformer (HFT) added to the link. In comparison with earlier generations of inductive-link universal power converters, in the proposed converter the level of link peak current and consequently power-loss are dramatically decreased. A very small film capacitor can be placed in parallel with the link inductor to facilitate zero-voltage-switching.


  • A multifunction series inductive AC-link universal power converter with reduced-switch count

    by Khalegh Mozaffari, Mahshid Amirabadi

    This paper proposes a new family of series inductive ac-link universal power converter with a lower number of switches compared to other series inductive ac-link universal converters. The number of switches in the proposed three-phase ac-ac configuration is reduced to 18; whereas, the original series inductive ac-link converter requires 24 switches. In this converter, the power is transferred from input to output entirely or partially through a small link inductor. A small capacitor that is placed in parallel with this inductor allows all the switches to benefit from zero-voltage switching (ZVS), which results in significant reduction of switching losses, stresses over the active switches, and electromagnetic interference (EMI). The converter structure enables an input voltage to be stepped up or down, and provides unidirectional power flow. This converter, in which the input and output can be dc, single-phase ac, or multi-phase ac, is capable of functioning in buck, boost, and buck-boost modes of operation. A combination of these operation modes is also feasible. Operating the converter in buck or boost functions leads to substantially decreased inductor link peak current, stress of the switches, and total power-loss compared to other inductive-link universal power converters. Galvanic isolation in the proposed converter can be provided by means of a compact lightweight single-phase high-frequency (HF) transformer connected to the link instead of a low-frequency transformer, which is a prominent contributor to size and weight of a conventional isolated converter. In view of these advantages, the proposed configuration offers improved efficiency, increased power-density, high reliability, reduced total cost, and wide range of operation in terms of input voltage. In this paper, the detailed behavior of the proposed converter is investigated, and performance of the converter is evaluated at various operating points through simulation and experimental results.


  • A Single-Phase Inverter/Rectifier Topology With Suppressed Double-Frequency Ripple

    by Khalegh Mozaffari, Mahshid Amirabadi, Yateendra Deshpande

    This paper introduces a new bidirectional single-phase inverter topology, which incorporates three ports connected to dc source/load, ac load/source, and a decoupling capacitor through a small inductor. The inductor, which is of alternating current, exchanges power between different ports of the single-phase system. The proposed topology is capable of accomplishing voltage step-up or step-down, suppressing the ripple power, and performing inversion or rectification operation in one stage of power conversion. The proposed configuration offers an active decoupling function, which not only eliminates the double-frequency ripple power at the dc-side but also achieves minimum capacitance requirements to minimize the size of the decoupling capacitor. This facilitates the use of a small thin-film capacitor, which offers a longer life-cycle and higher reliability compared with a bulky electrolytic capacitor. A control approach is also developed to regulate the dc-side and ac-side currents and manage the ripple power through proper distribution of power between each port. Moreover, a very small capacitor can be placed in parallel with the inductor to reinforce the proposed configuration with soft-switching operation, which enhances the overall efficiency and minimizes the voltage stress over the semiconductor devices. This converter is capable of accommodating an arbitrary number of dc or single-phase ac sources and/or loads configuring a multiple-input multiple-output inverter without introducing any additional passive elements or sacrificing the performance of the inverter. The primary focus of this paper is dc-to-ac conversion mode of operation, in spite of the fact that it can easily be configured to serve as a rectifier. Experimental and simulation results are presented to validate the operation of the proposed topology and its control strategy.