MAMahshid Amirabadi

Mahshid Amirabadi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mahshid Amirabadi has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Single-Stage Single-Phase AC-Link Universal Inverter Based on Zeta Topology

    by Karen Abbaskhanian, Mojtaba Salehi, Mahshid Amirabadi

    Single-phase inverters are widely used in numerous applications such as residential photovoltaic (PV) systems. These types of inverters are mostly realized by a two-stage DC/DC/AC conversion. Specifically, in the low power grid-connected residential PV applications, the DC side voltage level is typically lower than the AC grid peak voltage, which necessitates the employment of an additional step-up DC-DC converter. This requirement increases the converter’s overall cost and reduces the power density. More importantly, this type of two-stage conversion utilizes a bulky electrolytic capacitor, which suffers from critical reliability and lifetime issues, as an intermediate DC link between the input and output stages. This paper proposes a novel singlephase inverter, named Zeta-based AC-link universal inverter, which is derived from the conventional DC-DC zeta topology. The proposed converter is capable of providing adjustable step up/down voltage gain ratio with variable frequency, all in an indirect single stage of power conversion. It uses a small series film capacitor and a small parallel inductor as the AC-link elements. The presented topology offers several advantages over the conventional two-stage structure, such as higher reliability and longer lifespan due to eliminating the large electrolytic DC link capacitor and less overall component count, as well as higher power density and compactness due to using small high-frequency passive components. Besides, as the proposed converter features a high-frequency link network, a compact high-frequency transformer can be employed at the link for isolation purposes, which further shows the superiority of this topology. The proposed topology and corresponding control principles are discussed in this paper and its performance is verified through simulations and experiments.


  • A Highly Reliable Zeta-Based AC-Link Universal Converter

    by Mojtaba Salehi, Karen Abbaskhanian, Mahshid Amirabadi

    In this article, a single-stage Zeta-based universal converter is proposed. This converter is capable of stepping up and down the voltage in a wide range. Moreover, this class of converters uses a small inductor along with a very small film capacitor at the link, instead of electrolytic capacitors used in most conventional dc-link converters. Electrolytic capacitors have a shorter lifetime compared to other components of a power electronic converter and their elimination significantly improves the reliability of a converter. The power conversion is carried out in one stage, increasing the efficiency compared to multistage power converters. Due to the small size of the link capacitor, the dynamic response of the proposed converter would be very fast, making the proposed converter suitable for very fast response applications. Furthermore, when isolation is needed, a compact high-frequency transformer can be employed at the link instead of heavy line-frequency transformers to increase the converter's power density. Compared to Ćuk-based universal converters, this topology reduces the link peak voltage on the film capacitor and reduces the size of the filters. This article explains the proposed converter's design and principles of operation, and their performance is evaluated through simulations and experiments.


  • Parallel Capacitive-Link Universal Converters With Low Current Stress and High Efficiency

    by Junhao Luo, Khalegh Mozaffari, Brad Lehman, Mahshid Amirabadi

    Series capacitive-link universal converters are a relatively new class of single-stage power converters that offer numerous advantages including high reliability, high power density, and high efficiency. However, one of the limitations of these converters is high current stress of the switches, which lowers their efficiency especially in high current applications. In this paper, a new class of soft-/hard-switched parallel capacitivelink converters is introduced to address this limitation of the series capacitive-link universal converter while keeping its advantages. Apart from providing bidirectional power transfer, the proposed ac–ac converter can implement voltage stepping up/down as well as frequency transformation. A small film capacitor, which is placed in parallel with the input and output switch bridges, is responsible for transferring the power from input towards output. A small inductor can be placed in series with the link capacitor to realize zero-current-switching (ZCS) for all the switches under any load conditions, which lowers the switching losses and reduces EMI. The proposed parallel capacitive-link converter is expected to offer an enhanced efficiency and reduced current stress compared to the series capacitive-link universal converters. In this paper, principles of the operation of the proposed converter are presented, and its performance and advantages are verified by simulation and experiment.


  • Open Access

    A Ćuk-Based Modular DC–DC Converter For Medium Voltage Direct Current (MVDC) Applications

    by Abdulgafor Alfares, Brad Lehman, Mahshid Amirabadi

    A highly reliable modular DC-DC converter that is well-suited to the medium -voltage direct-current (MVDC) grid applications is presented in this paper. Each power module in the proposed converter is designed and controlled such that it employs two small film capacitors for transferring the power from the source to the load. This feature eliminates the need for large electrolytic capacitors that are sensitive to high temperatures and have high failure rates. Furthermore, each power module is configured as an isolated converter, using an integrated high frequency transformer. Taking advantage of the leakage inductance of the transformer, the switches benefit from zero current turn-off and soft turn-on. Each power module sees only one switch or diode on the conduction path when transfering energy from the input to the link capacitors or from the link capacitors to the output, which results in relatively low conduction losses. Another advantage of the proposed converter is the possibility of having bidirectional flow of power. To form modular converters that facilitate sharing voltage or current in high power applications, the input terminals and output terminals of the power modules can be connected in series or in parallel. In this paper, an input-parallel output-series (IPOS) modular configuration is considered to increase the voltage blocking capability at the output and handle high currents at the input of the converter. In this paper, principles of the operation, design, and analysis of the proposed modular converter are discussed in detail, and performance of the modular converter is evaluated through simulations and experiments.


  • An Overview of Converter Topologies and Their Derivations and Interrelationships

    by Robson Bauwelz Gonzatti, Yuan Li, Mahshid Amirabadi, Brad Lehman, Fang Zheng Peng

    Canonical switching cell is known as the basic building block of dc-dc buck, boost, buck-boost, Ćuk converters, voltage/current source inverters as well as multilevel converters. This paper reveals the existence of another basic switching cell as a singular structure of the canonical switching cell. The proposed new basic cell can constitute SEPIC, Zeta converters, and Z-source converters. Each of the basic switching cells has the simplest form with two complementary switches, one inductor and one capacitor. An approach to construct a dc-dc converter by connecting source/load to the basic switching cells’ terminals is demonstrated. Some existing topologies of dc-dc converters are correlated following the proposed approach. Further, this paper reviews Z-source/ quasi-Z-source converters, universal converters, and multiple-source converters to uncover some general approaches for topology manipulating. Z-source/quasi-Z-source converters and the emerging classes of universal converters are used as examples to demonstrate the incorporation of their switches. Multiple source converters are fabricated by combining basic switching cells, in both the voltage source and current source form, using the duality principle. With the ever-increasing research efforts on converter topologies, it is hoped that this paper will improve the understanding of the existing converter relationships and inspire insights for new topological developments and applications.


  • The Methodology of Constructing the Quadratic Converters

    by Guanlin Li, Mahshid Amirabadi, Xiyou Chen, Brad Lehman

    This paper provides a systematic method to construct types of quadratic converters. A 3-terminal, 4-element switching cell, consisting of 1 diode, 1 switch, 1 capacitor and 1 inductor, is inserted into a separated conventional switching cell to create the quadratic converter. Detailed steps of the proposed method are described. Almost all the known non-isolated quadratic converters with two inductors, two capacitors, two power switches and two diodes (or one power switch and three diodes) can be re-developed by this method, but also many new topologies can be proposed. For example, the 3-terminal, 4-element switching cells can be inserted into SEPIC, CUK and ZETA converters in different ways to derive different types of quadratic topologies. Further, the proposed method can be extended to generate cubic or nth-power converters. Many of these quadratic converters are compared in terms of their DC gain, number of switches and diodes, voltage stress on the switches, character of input current, output polarity, and so on. The selection procedure to determine which quadratic converter might be used for different applications is presented. Finally, to demonstrate the generality of the approach, a new type of quadratic converter is derived and evaluated in both simulation and experiment.


  • An Input-Series Output-Parallel Modular Three-Phase AC–AC Capacitive-Link Power Converter

    by Ehsan Afshari, Mahshid Amirabadi

    Modular converters with stackable cells are widely used in high-power applications, where the voltages and/or currents are beyond the ratings of the commercially available switches. Majority of existing modular converter topologies are based on dc-link converters that require several electrolytic capacitors with large capacitances, which reduce the lifetime of the power converter and increase size and volume. This article proposes an input-series output-parallel modular three-phase ac-ac universal power converter, which is formed by three identical and stackable capacitive-link modules that do not require electrolytic capacitors for power conversion. Exclusion of the electrolytic capacitors is achieved by operating the modules in discontinuous capacitor voltage mode. Each module requires two film capacitors with very small capacitances for transferring the power and provides galvanic isolation through high-frequency transformers. Utilization of film capacitors with small capacitances enhances the reliability. Furthermore, the proposed stackable capacitive-link modules enable a scalable and modular design. In this article, power cells are connected in series at the input and in parallel at the output to form a modular universal power converter that can share voltage/current among the power cells in an ac-ac power conversion system. Frequency transformation and voltage step-up/-down are among the other features of the proposed converter. The details of the operation principles along with design considerations are discussed in this article. Moreover, the proposed modular power converter with two power cells is evaluated through simulations and experiments.


  • A Highly Reliable Single-Phase AC to Three-Phase AC Converter With a Small Link Capacitor

    by Masih Khodabandeh, Brad Lehman, Mahshid Amirabadi

    Single-phase ac to three-phase ac converters are needed in numerous applications, including motor drives used for residential applications. These converters, however, suffer from an inherent problem of mismatch between instantaneous input and output powers. Specifically, the instantaneous input power has a dc component along with an alternating component with double-line frequency, while the three-phase instantaneous output power is only dc. Conventional single-phase ac to three-phase ac converters use large electrolytic capacitors to handle this mismatch of power. However, these electrolytic capacitors may have high failure rates, which contribute to reduced lifetime of the converters. Moreover, these capacitors can be bulky and heavy. This article introduces a new single-phase ac to three-phase ac converter that uses a small film capacitor instead of large electrolytic capacitors. Despite using a small film capacitor, the double-line frequency harmonic does not appear at the input or output currents/voltages. The principles of the operation of the proposed topology are presented in this article, and its performance is evaluated through both simulations and experiments.