Masih Khodabandeh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Masih Khodabandeh has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Mahshid Amirabadi
Electrical and Computer Engineering Department, Northeastern University, Boston, MA, USA
5 shared publications - Ehsan Afshari
Electrical and Computer Engineering Department, Northeastern University, Boston, MA, USA
3 shared publications - Brad Lehman
Department of Electrical and Computer Engineering, Northeastern University, Boston, MA, USA
2 shared publications - Xinmin Zhang
Guangdong Provincial Highway Construction Co., Ltd. (China)
1 shared publication
Latest Publications
- 17 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 36 (9) , 10051-10064
A Highly Reliable Single-Phase AC to Three-Phase AC Converter With a Small Link Capacitor
Single-phase ac to three-phase ac converters are needed in numerous applications, including motor drives used for residential applications. These converters, however, suffer from an inherent problem of mismatch between instantaneous input and output powers. Specifically, the instantaneous input power has a dc component along with an alternating component with double-line frequency, while the three-phase instantaneous output power is only dc. Conventional single-phase ac to three-phase ac converters use large electrolytic capacitors to handle this mismatch of power. However, these electrolytic capacitors may have high failure rates, which contribute to reduced lifetime of the converters. Moreover, these capacitors can be bulky and heavy. This article introduces a new single-phase ac to three-phase ac converter that uses a small film capacitor instead of large electrolytic capacitors. Despite using a small film capacitor, the double-line frequency harmonic does not appear at the input or output currents/voltages. The principles of the operation of the proposed topology are presented in this article, and its performance is evaluated through both simulations and experiments.
- 17 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 36 (9) , 10051-10064
A Highly Reliable Single-Phase AC to Three-Phase AC Converter With a Small Link Capacitor
Single-phase ac to three-phase ac converters are needed in numerous applications, including motor drives used for residential applications. These converters, however, suffer from an inherent problem of mismatch between instantaneous input and output powers. Specifically, the instantaneous input power has a dc component along with an alternating component with double-line frequency, while the three-phase instantaneous output power is only dc. Conventional single-phase ac to three-phase ac converters use large electrolytic capacitors to handle this mismatch of power. However, these electrolytic capacitors may have high failure rates, which contribute to reduced lifetime of the converters. Moreover, these capacitors can be bulky and heavy. This article introduces a new single-phase ac to three-phase ac converter that uses a small film capacitor instead of large electrolytic capacitors. Despite using a small film capacitor, the double-line frequency harmonic does not appear at the input or output currents/voltages. The principles of the operation of the proposed topology are presented in this article, and its performance is evaluated through both simulations and experiments.
- Open Access
- 9 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (10) , 9503-9519
A Family of Ćuk, Zeta, and SEPIC Based Soft-Switching DC–DC Converters
- 9 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (10) , 9503-9519
Open AccessA Family of Ćuk, Zeta, and SEPIC Based Soft-Switching DC–DC Converters
- 13 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (3) , 2312-2326
A Single-Stage Soft-Switching High-Frequency AC-Link PV Inverter: Design, Analysis, and Evaluation of Si-Based and SiC-Based Prototypes
This paper proposes a high-power-density and reliable inverter topology, which transfers the maximum power of a PV array to the load in one power conversion stage. The single-stage power conversion along with soft-switching capability of the proposed three-phase PV inverter promises high efficiency at all operating points. Instead of a capacitive dc-link that decouples the dc-dc converter and the voltage source inverter in traditional two-stage PV inverters, a high frequency capacitive ac-link is employed in the proposed inverter, which enables exploiting a very small film capacitor, rather than a bulky electrolytic capacitor, for transferring power. Eliminating electrolytic capacitors prolongs the lifetime of this inverter. Considering the long lifetime of PV modules, this feature is of high importance in PV applications. The high frequency ac-link also allows using high frequency transformers for providing galvanic isolation. Therefore, this inverter is expected to have a very high power density. This paper presents principles of the operation and control, design, and analysis of this inverter, and verifies the performance of the inverter through two prototypes: a 2-kW Si-based prototype and a 2-kW SiC-based prototype operating at different switching frequencies.
- 13 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (3) , 2312-2326
A Single-Stage Soft-Switching High-Frequency AC-Link PV Inverter: Design, Analysis, and Evaluation of Si-Based and SiC-Based Prototypes
This paper proposes a high-power-density and reliable inverter topology, which transfers the maximum power of a PV array to the load in one power conversion stage. The single-stage power conversion along with soft-switching capability of the proposed three-phase PV inverter promises high efficiency at all operating points. Instead of a capacitive dc-link that decouples the dc-dc converter and the voltage source inverter in traditional two-stage PV inverters, a high frequency capacitive ac-link is employed in the proposed inverter, which enables exploiting a very small film capacitor, rather than a bulky electrolytic capacitor, for transferring power. Eliminating electrolytic capacitors prolongs the lifetime of this inverter. Considering the long lifetime of PV modules, this feature is of high importance in PV applications. The high frequency ac-link also allows using high frequency transformers for providing galvanic isolation. Therefore, this inverter is expected to have a very high power density. This paper presents principles of the operation and control, design, and analysis of this inverter, and verifies the performance of the inverter through two prototypes: a 2-kW Si-based prototype and a 2-kW SiC-based prototype operating at different switching frequencies.
- 28 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (3) , 2104-2118
A Single-Stage Capacitive AC-Link AC–AC Power Converter
A single-stage three-phase ac-ac converter benefiting from a high frequency alternating link voltage is proposed in this paper. In this converter, a very small film capacitor can transfer the energy from the input to the output. This eliminates the need for large electrolytic capacitors that are typically used in dc-link ac-ac converters. Moreover, a compact high frequency transformer at the link can replace the bulky low frequency transformers, in case isolation is required. These features increase the power density as well as reliability of the proposed converter in comparison with the conventional dc-link converters. The number of required switches in the proposed converter is 12, which is less than the number of switches needed in matrix converters, leading to lower switching and conduction losses. Despite being single-stage, the proposed ac-ac converter is capable of both stepping up and stepping down the voltage and also frequency transformation. This eliminates the need for using cascaded power converters. In this paper, the operation principles of the proposed ac-ac converter are investigated, and variable switching frequency and fixed switching frequency control methods for operating this converter are introduced. The performance of the converter is verified through simulation and experiment.
- 28 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (3) , 2104-2118
A Single-Stage Capacitive AC-Link AC–AC Power Converter
A single-stage three-phase ac-ac converter benefiting from a high frequency alternating link voltage is proposed in this paper. In this converter, a very small film capacitor can transfer the energy from the input to the output. This eliminates the need for large electrolytic capacitors that are typically used in dc-link ac-ac converters. Moreover, a compact high frequency transformer at the link can replace the bulky low frequency transformers, in case isolation is required. These features increase the power density as well as reliability of the proposed converter in comparison with the conventional dc-link converters. The number of required switches in the proposed converter is 12, which is less than the number of switches needed in matrix converters, leading to lower switching and conduction losses. Despite being single-stage, the proposed ac-ac converter is capable of both stepping up and stepping down the voltage and also frequency transformation. This eliminates the need for using cascaded power converters. In this paper, the operation principles of the proposed ac-ac converter are investigated, and variable switching frequency and fixed switching frequency control methods for operating this converter are introduced. The performance of the converter is verified through simulation and experiment.