Minoru Maeda
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Minoru Maeda has a total of 165 co-authors. Here are the top co-authors by number of shared publications:
- Jung Ho Kim
Institute for Superconducting and Electronic Materials (ISEM), Faculty of Engineering and Information Sciences, University of Wollongong, North Wollongong, New South Wales, 2500, Australia
31 shared publications - Shi Xue Dou
Institute of Energy Materials Science University of Shanghai for Science and Technology Shanghai China
15 shared publications Seyong Choi
Department of Electrical Engineering and Research Institute for Energy, Kangwon National University
13 shared publications- Dipak Patel
Institute for Plasma Research
11 shared publications - Shahriar Al Hossain
Australian Institute for Bioengineering and Nanotechnology (AIBN), The University of Queensland, Brisbane, Queensland 4072, Australia
11 shared publications - Seyong Choi
Department of Electrical Engineering and Kangwon High Magnetic Field Center, Institute of Quantum Convergence Technology, Kangwon National University, Gangwon, South Korea
10 shared publications
Latest Publications
- 4 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-5
Development of 2 km-Class Carbon-Doped MgB 2 Wire With Uniform Critical Current Property
Kilometer-scale carbon-doped MgB2 superconducting wires were fabricated using a three-dimensional vibrating powder-filling powder-in-tube process and systematically evaluated for uniformity and performance. The optimized process enabled fabrication of a 2.1 km-long 18 filament conductor with a critical current density (Jc) of 1.13 × 105 A/cm² at 20 K and 2 T, showing only ∼2% variation along its length. Carbon substitution enhanced high-field performance primarily through impurity scattering, while the n-value demonstrated a strong proportionality with Jc across all measured conditions. This correlation establishes the n-value as not only a research parameter but also a practical quality-control metric for industrial wire production. The combined achievements of process innovation and transport uniformity highlight the feasibility of MgB2 conductors for MRI magnets, high-field research magnets, and superconducting power transmission.
- 4 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (5) , 1-5
Development of 2 km-Class Carbon-Doped MgB 2 Wire With Uniform Critical Current Property
Kilometer-scale carbon-doped MgB2 superconducting wires were fabricated using a three-dimensional vibrating powder-filling powder-in-tube process and systematically evaluated for uniformity and performance. The optimized process enabled fabrication of a 2.1 km-long 18 filament conductor with a critical current density (Jc) of 1.13 × 105 A/cm² at 20 K and 2 T, showing only ∼2% variation along its length. Carbon substitution enhanced high-field performance primarily through impurity scattering, while the n-value demonstrated a strong proportionality with Jc across all measured conditions. This correlation establishes the n-value as not only a research parameter but also a practical quality-control metric for industrial wire production. The combined achievements of process innovation and transport uniformity highlight the feasibility of MgB2 conductors for MRI magnets, high-field research magnets, and superconducting power transmission.
- 11 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-4
Perspective on Kilometer-Scale MgB2 Superconducting Wires With 127 Filaments
Since 2015, we have successfully developed magnesium diboride (MgB2) wire at the 3 km-scale and achieved a high critical current density (Jc) of 3.5 × 105 A/mm2 at 4.2 K and 3 T for various applications. To ensure mechanical strength and performance stability, it is necessary to design MgB2 wire with a large number of internal filaments. In this study, we conducted a comparative analysis of the number/size of filaments and electrical properties of 19 (18 + 1Cu)-, 37 (30 + 7Cu)-, 61 (54 + 7Cu)-, 91 (72 + 19Cu and 78 + 13Cu)-, and 127 (114 + 13Cu)-filament MgB2 wires. Increasing the number of filaments had a minor effect on the fill factor and did not significantly enhance the Jc. However, it was observed that the deformation of the internal filaments became more inhomogeneous. The mean filament size of the 19-filament architecture was approximately 80 µm, while that of the 127-filament architecture showed a significant reduction, effectively reaching less than 33 µm. The microstructure and characterization of the produced wires are discussed in detail.
- 11 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-4
Perspective on Kilometer-Scale MgB2 Superconducting Wires With 127 Filaments
Since 2015, we have successfully developed magnesium diboride (MgB2) wire at the 3 km-scale and achieved a high critical current density (Jc) of 3.5 × 105 A/mm2 at 4.2 K and 3 T for various applications. To ensure mechanical strength and performance stability, it is necessary to design MgB2 wire with a large number of internal filaments. In this study, we conducted a comparative analysis of the number/size of filaments and electrical properties of 19 (18 + 1Cu)-, 37 (30 + 7Cu)-, 61 (54 + 7Cu)-, 91 (72 + 19Cu and 78 + 13Cu)-, and 127 (114 + 13Cu)-filament MgB2 wires. Increasing the number of filaments had a minor effect on the fill factor and did not significantly enhance the Jc. However, it was observed that the deformation of the internal filaments became more inhomogeneous. The mean filament size of the 19-filament architecture was approximately 80 µm, while that of the 127-filament architecture showed a significant reduction, effectively reaching less than 33 µm. The microstructure and characterization of the produced wires are discussed in detail.
- Open Access
- 1 July 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (19) , 36042-36049
Evaluation of in-plane and out-of-plane crystallinities with residual amorphous phases for MgB2 superconductor
- 1 July 2024
- Published by Elsevier in Ceramics International
- Vol. 50 (19) , 36042-36049
Open AccessEvaluation of in-plane and out-of-plane crystallinities with residual amorphous phases for MgB2 superconductor
- Open Access
- 20 May 2024
- Published by Cryogenic Association of Japan in Teion Kogaku (Journal of Cryogenics and Superconductivity Society of Japan)
- Vol. 59 (3) , 129-136
Anisotropic Crystallinity/Disorder and In-field Transport Performance of Multi-band MgB2 Materials
Multi-band MgB2 materials have been considered and developed for medical and energy applications. Since some of these applications require kilometers-long wires or tapes, many companies have developed MgB2 materials with fabrication processes through powder filling (e.g., a powder-in-tube process), which can satisfy the requirements of the long lengths for commercial production. These material structures have also been studied to enhance the transport performance of the critical current in magnetic fields. For in-field enhancement, it is essential to gain a deep understanding of crystallinity/disorder (which is related to grain growth, the number of defects, and the distribution of strain/distortion). The material crystallinity, which affects the in-field performance, can become anisotropic due to the structural nature of MgB2, but most studies have not focused on this anisotropy. Therefore, this review highlights and discusses multi-band MgB2 materials in terms of critical current performance and anisotropic crystallinity. This perspective can also be useful for further modifying the material structures of wires, tapes, bulks, powders, etc.
- 20 May 2024
- Published by Cryogenic Association of Japan in Teion Kogaku (Journal of Cryogenics and Superconductivity Society of Japan)
- Vol. 59 (3) , 129-136
Open AccessAnisotropic Crystallinity/Disorder and In-field Transport Performance of Multi-band MgB2 Materials
Multi-band MgB2 materials have been considered and developed for medical and energy applications. Since some of these applications require kilometers-long wires or tapes, many companies have developed MgB2 materials with fabrication processes through powder filling (e.g., a powder-in-tube process), which can satisfy the requirements of the long lengths for commercial production. These material structures have also been studied to enhance the transport performance of the critical current in magnetic fields. For in-field enhancement, it is essential to gain a deep understanding of crystallinity/disorder (which is related to grain growth, the number of defects, and the distribution of strain/distortion). The material crystallinity, which affects the in-field performance, can become anisotropic due to the structural nature of MgB2, but most studies have not focused on this anisotropy. Therefore, this review highlights and discusses multi-band MgB2 materials in terms of critical current performance and anisotropic crystallinity. This perspective can also be useful for further modifying the material structures of wires, tapes, bulks, powders, etc.
- 12 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
Evaluation and Improvement of Uniformity in km-Class MgB2 Superconducting Wires
An 18-multifilamentary MgB 2 wire, classified within the 250 m-class, was produced utilizing a technique to improve the uniformity of powder filling by employing three-dimensional vibrators. A comprehensive evaluation of the fabricated wire revealed that the uniformity of the critical current ( I c ) and fill factor, determined through the coefficient of variation, were 2 and 4%, respectively, along the wire direction. Building upon this achievement, a scaled-up MgB 2 wire was fabricated, with dimensions of approximately 3 km in length and 0.83 mm in diameter. At 20 K and 2 T, the I c was measured to be 191 A. The corresponding critical current density ( J c ), determined to be 190,000 A/cm 2 , represents a significant improvement when compared to that yielded by the conventional gravity-based powder filling method.
- 12 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
Evaluation and Improvement of Uniformity in km-Class MgB2 Superconducting Wires
An 18-multifilamentary MgB 2 wire, classified within the 250 m-class, was produced utilizing a technique to improve the uniformity of powder filling by employing three-dimensional vibrators. A comprehensive evaluation of the fabricated wire revealed that the uniformity of the critical current ( I c ) and fill factor, determined through the coefficient of variation, were 2 and 4%, respectively, along the wire direction. Building upon this achievement, a scaled-up MgB 2 wire was fabricated, with dimensions of approximately 3 km in length and 0.83 mm in diameter. At 20 K and 2 T, the I c was measured to be 191 A. The corresponding critical current density ( J c ), determined to be 190,000 A/cm 2 , represents a significant improvement when compared to that yielded by the conventional gravity-based powder filling method.
- 8 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-4
Enhanced Performance of Multifilamentary MgB2 Wires at a 2.5 km Scale Through Pyrene Doping
Carbon doping has proven to be a highly effective strategy for enhancing the electrical properties of MgB 2 wires, especially under a high magnetic field. However, unreacted doping material can persist as impurities due to uneven mixing or incomplete reactions, thereby detrimentally affecting electrical properties and their uniformity. In this study, we explore the application of pyrene doping to 18-multifilamentary MgB 2 wires with a total length of 2.5 kilometers. The aim of this study is to minimize residues and maximize high-field critical current properties. Our investigation includes X-ray diffraction refinement, scanning electron microscopy observations, and a comprehensive characterization of critical current properties. We are presently evaluating the viability of applying this doping material and method in large-scale commercial production.
- 8 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-4
Enhanced Performance of Multifilamentary MgB2 Wires at a 2.5 km Scale Through Pyrene Doping
Carbon doping has proven to be a highly effective strategy for enhancing the electrical properties of MgB 2 wires, especially under a high magnetic field. However, unreacted doping material can persist as impurities due to uneven mixing or incomplete reactions, thereby detrimentally affecting electrical properties and their uniformity. In this study, we explore the application of pyrene doping to 18-multifilamentary MgB 2 wires with a total length of 2.5 kilometers. The aim of this study is to minimize residues and maximize high-field critical current properties. Our investigation includes X-ray diffraction refinement, scanning electron microscopy observations, and a comprehensive characterization of critical current properties. We are presently evaluating the viability of applying this doping material and method in large-scale commercial production.
- Open Access
- 1 January 2024
- Published by KEAI Publishing in Journal of Magnesium and Alloys
- Vol. 12 (1) , 159-170
Superconducting joints using reacted multifilament MgB2 wires: A technology toward cryogen-free MRI magnets
- 1 January 2024
- Published by KEAI Publishing in Journal of Magnesium and Alloys
- Vol. 12 (1) , 159-170
Open AccessSuperconducting joints using reacted multifilament MgB2 wires: A technology toward cryogen-free MRI magnets
- Open Access
- 14 April 2023
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 954
Performance of MgB2 superconducting wire fabricated with non-identical Mg particles
- 14 April 2023
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 954
Open AccessPerformance of MgB2 superconducting wire fabricated with non-identical Mg particles
- 2 November 2022
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 934
Disorder anisotropy of layered structure in multi-band MgB2 superconducting materials with high critical current performance
- 2 November 2022
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 934
Disorder anisotropy of layered structure in multi-band MgB2 superconducting materials with high critical current performance
- 1 March 2022
- Published by Elsevier in Ceramics International
- Vol. 48 (5) , 6539-6548
Interfacial reaction and side effect of MgB2 superconducting material through low-rotation mechanical milling
- 1 March 2022
- Published by Elsevier in Ceramics International
- Vol. 48 (5) , 6539-6548
Interfacial reaction and side effect of MgB2 superconducting material through low-rotation mechanical milling