GJGuozhang Jia

Guozhang Jia

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Guozhang Jia has a total of 204 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effects of neon seeding location and E × B drift on plasma detachment in EAST

    by L. Y. Meng, X. J. Liu, L. Wang, J. Guo, G. Z. Jia, K. D. Li, L. Yu, J. B. Liu, D. G. Wu, R. Chen, et al.

    Optimizing impurity seeding locations is important for achieving divertor detachment with minimal impurity injection and maintaining core plasma performance. The effects of gas puffing at the scrape-off layer (GP@SOL) and private-flux region (GP@PFR) sides in the divertor, as well as the role of E × B drift, are investigated by Experimental Advanced Superconducting Tokamak experiments and SOLPS-ITER simulations. The study shows that GP@SOL is more effective in reducing the divertor electron temperature and heat flux and promoting plasma detachment, while not resulting in a higher core Ne content than GP@PFR. GP@SOL produces a higher Ne ion density in the outer divertor region than GP@PFR, resulting in stronger radiative energy loss there. Meanwhile, E × B drift further modifies the transport of Ne and D ions, affecting the relative detachment performance of GP@SOL and GP@PFR under different Bt conditions. After detachment, the changes in the electric fields modify the E × B transport of deuterium ions, leading to opposite radial shifts of the ion saturation current density peak under favorable and unfavorable Bt conditions.

  • Open Access

    The role of kinetic effects on the tungsten impurity transport in the boundary plasma of EAST

    by Hui Wang, Guoliang Xu, Rui Ding, Hang Si, Guozhang Jia, Jin Guo, Jinheng Zhao, Hai Xie, I.Y. Senichenkov, E.G. Kaveeva, et al.

    A kinetic impurity transport model has been implemented in the Monte-Carlo code DIVIMP to investigate W transport in the boundary plasma of EAST under varied divertor conditions. Background plasmas representing high-recycling and detached divertor conditions with D ₂ and Ne injection in low-confinement mode (L-mode) and high-confinement mode (H-mode) plasmas are provided by the SOLPS simulations, and W transport is then simulated with the DIVIMP code. The inclusion of kinetic effects is found to significantly reduce the W thermal force compared to the conventional fluid model, not only in low collisionality ( ν * < 20) conditions, but also in low ion temperature ( T i ) and high effective charge ( Z eff ) conditions. As the divertor condition varies from the high-recycling to the detached regime with Ne injection, kinetic effects on divertor W retention are enhanced by the decrease of ion temperature and the increase of effective charge. In high-density H-mode plasmas, the kinetic correction on the W thermal force is weaker than in low-density L-mode plasmas. However, the strong friction force in the high-density H-mode cases makes the influence of kinetic effects on W retention more significant, resulting in a reduction of core W density by more than two orders of magnitude. In addition, comparisons with the original Garching flux-limit correction in DIVIMP show that the flux-limit overestimates W thermal force and core W density, especially under impurity seeding conditions. Therefore, explicit kinetic modeling of the thermal force is required for accurate description of W transport in the boundary plasma of tokamaks.


  • Open Access

    Edge-localized mode mitigation enabled by active control of pedestal density gradient with new EAST tokamak divertor

    by X. Lin, Q. Q. Yang, G. S. Xu, G. Z. Jia, C. Zhang, Y. F. Wang, N. M. Li, N. Yan, R. Chen, X. Q. Xu, et al.

    Mitigation of large edge-localized modes (ELMs) has been achieved by actively reducing the pedestal density gradient with the EAST new right-angled lower divertor through changing the strike point position from the vertical target to the horizontal target. A series of dedicated experiments in the 2021–2024 EAST campaigns demonstrate that this ELM control solution is highly reproducible in a broad parameter space of edge safety factor q95 = 4.7–7.1, heating power Ptotal = 2.3–5 MW, and pedestal collisionality νe,ped* = 1–6, under both favorable and unfavorable magnetic configurations. Higher plasma density could facilitate the achievement of this ELM control solution. Statistical results indicate that the ELM mitigation effect can be observed at relatively larger Greenwald density fraction of fGW > 0.47. In addition, this ELM mitigation effect can be achieved with both lithium-coated and boronized metal walls. The pedestal density gradient is systematically lower in the horizontal target case than that of the vertical target case when the ELM mitigation effect can be observed. SOLPS-ITER simulation results indicate that the pedestal fueling from divertor recycling is significantly lower in the horizontal target case. This could contribute to the formation of a flattened pedestal density profile with small ELMs.


  • Open Access

    Modelling study of divertor W leakage for different divertor conditions with Ne seeding in EAST tokamak

    by Guoliang Xu, Hui Wang, Rui Ding, Hang Si, Guozhang Jia, Jin Guo, Hai Xie, Rong Yan, Ran Hai, Dahuan Zhu, et al.

    Sequential SOLPS-ITER and DIVIMP simulations are carried out for tungsten (W) edge transport during neon (Ne) injection in EAST, elucidating the pathway of W impurity leakage from the divertor to the core plasma under different dissipative divertor conditions. Divertor conditions from low-recycling to detachment are generated by modulating the Ne injection rate in the SOLPS simulation. With the drift velocities incorporated in DIVIMP, W transport under the drift effect is investigated. For low-density L-mode plasma conditions with favorable B t direction, the majority of W source originates from the outer divertor target and leaks upstream through the near-SOL E× B drift reversed region at both inner and outer divertors. The E× B drift is demonstrated to have a significant effect on W leakage and the effect diminishes with the increase of Ne injection rate. Compared to the D2 injection cases, Ne injection helps to achieve a strong dissipative divertor condition at a much lower plasma density, resulting in a higher W leakage ability due to the smaller friction with the background plasma. For Ne injection cases under high-density H-mode conditions, W leaks mostly through the outer divertor region while the inner divertor is fully detached. Compared to the L-mode cases, the shorter power decay lengths in the scrap-off layer (SOL) of the H-mode cases result in smaller parallel E× B drift velocities especially in the middle and far SOL region. With the increase of the Ne injection rate, the decrease of the E× B drift in the middle SOL leads to a wider near-separatrix W leakage path. Therefore, a worse divertor W screening is expected, which is consistent with the previous published experimental observations (Ding et al 2022 Nucl. Mater. Energy 33 101250).


  • Open Access

    Effects of divertor geometry on detachment and core plasma performance with impurity seeding in EAST

    by L.Y. Meng, L. Wang, J.B. Liu, K.D. Li, X. Lin, X.J. Liu, G.Z. Jia, J. Guo, T. He, L. Yu, et al.

    Divertor detachment operation compatible with the core plasma is an effective method to alleviate the steady-state heat flux approaching the divertor target; this scheme will be adopted by high-performance tokamaks in the future, such as International Thermonuclear Experimental Reactor (ITER). Currently, two ITER-like tungsten divertors with different geometries have been installed at the top and bottom of Experimental Advanced Superconducting Tokamak (EAST), providing conditions for the present study to investigate the effect of divertor geometry on the compatibility between detachment and core plasma. Recent H-mode experiments show that the electron temperature and heat flux of the outer target of the lower divertor decrease lower than those of the upper divertor after similar amounts of impurity are truly injected into the plasma. SOLPS simulations further prove that the closed lower divertor with a ‘corner slot’ structure is beneficial for trapping impurity and deuterium particles, thereby increasing momentum and energy losses. For the upper single-null discharges, the divertor electron temperature can be relatively reduced by increasing impurity seeding, but it is also easy to decrease the plasma stored energy and even lead to an H-L back transition. In addition, statistical data on discharges with impurity seeding show that the proportion of detachment discharges achieved by using the closed divertor is higher than that achieved by using the open divertor. The discharges with the closed divertor after detachment have less damage to the core plasma performance than those with the open divertor, irrespective of whether neon or argon seeding is employed. This research will support long-pulse detachment operation in EAST and provide a reference for other tokamaks in divertor design.


  • Open Access

    Dependence of ELM instability on separatrix density in EAST long-pulse H-mode plasmas

    by Y.F. Wang, G.Z. Jia, G.S. Xu, R. Chen, L. Chen, N. Yan, L. Wang, Q. Zang, T. Zhang, Y.M. Duan, et al.

    The transition from small edge-localized modes (ELMs) to large ELMs has been repetitively observed in minute-scale long-pulse high-confinement mode (H-mode) discharges during the 2017 EAST campaign. The appearance of large ELMs is found to be strongly correlated with the decrease in separatrix density due to the gradual decrease in fuel recycling during long-pulse H-mode operations (LPHOs). By the numerical scanning of separatrix density with a fixed temperature profile, it has been found that the dependence of ELM instability on separatrix density is related to the competition between the ion diamagnetic stabilizing effect and destabilizing effect of pressure gradient and current density in the pedestal region. This sheds light on a comprehensive understanding of the different roles of separatrix density in ELM instability observed during EAST experiments. With a high separatrix density, the ideal ballooning mode can be destabilized near the separatrix, which is thought to help achieve small ELMs in EAST LPHOs. During the 2021 EAST campaign, an experiment of large ELM control was performed through actively changing fuel recycling by moving the strike point location on the lower tungsten divertor target plate. It has been demonstrated that the mitigation of large ELMs is strongly correlated with the significant increase in separatrix density, which is thought to be attributed to a higher ionization source in the scrape-off layer (SOL) region by SOLPS-ITER simulation. The high ionization source in the SOL region is believed to provide a strong fueling effect near the separatrix and thus raise the local density, which is considered an important reason for triggering ballooning instabilities near the separatrix and achieving small ELMs.


  • Open Access

    Experimental and modeling study of the impact of upstream D2 puff on divertor detachment and impurity control with argon seeding in EAST

    by Tao He, Zhongshi Yang, Kedong Li, Liang Wang, Guozhang Jia, Xiaoju Liu, Guojian Niu, Xin Lin, Feifei Nian, Rong Wang, et al.

    Radiative divertor is an effective method for the divertor heat flux control, but excessive core impurity radiation can deteriorate the confinement in tokamaks. In recent EAST experiments, the compatibility of divertor detachment and impurity control with good core confinement (H98,y2 ∼1) has been achieved simultaneously by combining an upstream deuterium (D2) puff and divertor argon (Ar) seeding. Both experimental and SOLPS-ITER modeling reveal that additional D2 puff can further mitigate the target heat load and facilitate the detachment. The SOLPS-ITER results also show that the D2 puff makes a limited contribution to the Ar line radiation but a significant contribution to the neutral radiation in the SOL and divertor regions. The physical mechanism behind the effect of the D2 puff on the Ar retention is also revealed by the modeling. The increase in the Ar velocity is the major reason for the improved Ar retention in the partial detachment state. The increase in vAr is mainly caused by the strengthening of frictional drag of D+, which is because the additional D2 puff increases the pressure gradient force (FPG) and the electric field force (FE) on D+. Further analysis reveals that in the deep detachment state, some other negative effects play a dominant role in determining the Ar retention, such as the shift of the region of the Ar+ ionization source, the decrease in the strength of the Ar+ ionization source, and the net force on the Ar ions near the target.


  • Open Access

    Drifts effect on the divertor W leakage mechanisms under different dissipative divertor conditions of EAST

    by Hui Wang, Hui Wang, Hui Wang, Guoliang Xu, Guoliang Xu, Guoliang Xu, Rui Ding, Rui Ding, Rui Ding, Hang Si, et al.

    A new drift module has been developed in the DIVIMP code, enabling two-dimensional simulations of tungsten (W) transport in the edge plasma with full drifts included. By using the SOLPS-DIVIMP code package, the impact of drifts on W transport and screening has been investigated for various levels of dissipative divertor conditions and different divertor geometric configurations in EAST. Simulation results reveal that E ⃗ × B ⃗ drifts can enhance the W leakage by more than one order of magnitude. Under the favorable Bt direction, W erosion mainly occurs on the outer divertor target, making the W leakage from the outer divertor region the dominator. A leakage path from the near-scrape-off layer (SOL) region is revealed by the modeling results. In the leakage path, both the ion temperature gradient force and the reversed poloidal E ⃗ × B ⃗ drift are pointing upstream. With the radial E ⃗ × B ⃗ drift pushing W ions from the well-screened far-SOL region to the near-SOL region, the leakage from the near-SOL region becomes significant. As the divertor condition varies from the low-recycling regime to the deep detachment regime, the decrease of the ion temperature gradient velocity and poloidal E ⃗ × B ⃗ drift velocity narrows the width of the near-SOL leakage tunnel and thus enhances W screening. While under the unfavorable Bt , W erosion and leakage from the inner divertor target matters, the leakage mechanism especially the leakage path from the near-SOL region is similar as the favorable Bt cases. Furthermore, the effect of different divertor geometries on the W screening has been investigated. The configuration with the outer strike point (OSP) on the horizontal divertor plate is proved to narrow the near-SOL leakage tunnel, and thus the unreversed poloidal E ⃗ × B ⃗ drift pointing to the divertor target dominates and helps to enhance the divertor W screening. For the same D 2 puffing rate, the W leakage ability of cases with the OSP on the horizontal target can be more than 10 times weaker than the cases with the OSP on the vertical target, especially when the divertor is detached.


  • Open Access

    Comparison of partial and deep energy detachment behaviors with Ar seeding on EAST new corner slot divertor

    by Kedong Li, Rong Wang, Zhongshi Yang, Kai Wu, Tao He, Guozhang Jia, Xin Lin, Lingyi Meng, Lin Yu, Bin Zhang, et al.

    It is necessary for future fusion reactor to reduce the heat fluxes on the entire divertor target, especially if view of long pulse high performance operation. In recent EAST experiments, partial energy detachment without confinement degradation, and deep energy detachment with protection of the entire divertor target have both been confirmed on EAST corner slot divertor by argon (Ar) seeding, which can provide reference for the divertor protection on future fusion reactors. In the deep energy detachment state, the electron temperature T et along entire lower outer divertor target decreases to less than 10 eV and heat fluxes are also strongly mitigated with peak heat flux reduction of more than 90%. Compared to the attached state, there is a moderate confinement degradation with H 98,y2 from ∼1 to ∼0.9 because of Ar radiation in the core region. This confinement degradation can be avoided in the partial energy detachment state, where the radiative power losses in the core are reduced. The experiment and SOLPS-ITER simulation results show that there is no decrease of particle flux js on the divertor target in the partial energy detachment state because the momentum loss in the SOL region is not strong enough. With increasing Ar seeding, there is a js decrease in the deep energy detachment state. The increases of momentum and power losses in the SOL region, and the decrease of upstream pressure all contribute to the js reduction.