Andrea Sosso
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Andrea Sosso has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Paolo Durandetto
Quantum Metrology and Nano Technologies Division, Istituto Nazionale di Ricerca Metrologica (INRiM), Turin, Italy
8 shared publications - Matteo Fretto
Istituto Nazionale di Ricerca Metrologica (INRIM), Turin, Italy
4 shared publications - Eugenio Monticone
Istituto Nazionale di Ricerca Metrologica (INRiM)
3 shared publications Giorgio Masoero
Accademia di Agricoltura di Torino, Palazzo Corbetta Bellini di Lessolo, Via Andrea Doria 10, Torino 10100, Italy
3 shared publications- Natascia De Leo
Istituto Nazionale di Ricerca Metrologica
3 shared publications Pier Paolo Capra
Istituto Nazionale di Ricerca Metrologica (INRIM), Strada delle Cacce 91, Torino 10135, Italy
3 shared publications
Latest Publications
- Open Access
- 11 October 2025
- Published by Elsevier in Data in Brief
- Vol. 63, 112165
Data of electrical signalling in tomato for the detection of powdery mildew
- 11 October 2025
- Published by Elsevier in Data in Brief
- Vol. 63, 112165
Open AccessData of electrical signalling in tomato for the detection of powdery mildew
- Open Access
- 18 June 2025
- Published by Elsevier in Computers and Electronics in Agriculture
- Vol. 237
Electrical signalling in tomato — Oidium neolycopersici pathosystem for detection of powdery mildew
- 18 June 2025
- Published by Elsevier in Computers and Electronics in Agriculture
- Vol. 237
Open AccessElectrical signalling in tomato — Oidium neolycopersici pathosystem for detection of powdery mildew
- Open Access
- 1 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74, 1-15
Magnitude and Phase Calibration of Lock-In Amplifiers, and Analysis of the Noise Response
- 1 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 74, 1-15
Open AccessMagnitude and Phase Calibration of Lock-In Amplifiers, and Analysis of the Noise Response
- 23 February 2021
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 34 (4) , 045008
Using a Josephson junction as an effective on-chip temperature sensor
Temperature sensing and control are essential in experiments running in cryocooled systems, as with the case of liquid helium-free superconducting devices. A Josephson junction as on-chip temperature sensor operated in ac provides the highest sensitivity and minimal power loading to the cryogenic environment, thanks to the noise rejection of lock-in detection. To demonstrate the advantages of on-chip sensing, we tested it with a Josephson voltage standard array in cryocooler and compared with the conventional case of a sensor on the cold surface of the refrigerator, showing that the power dissipated within the chip may further increment the device temperature up to some tenths of kelvin. An ac Josephson junction sensor is proven to be capable of directly stabilizing the temperature of the superconductive circuit from fluctuations of dissipated power during operation. Reliability issues related to flux trapping are discussed and solutions are proposed suited to different applications. Overall, on-chip control with ac Josephson temperature sensing has the advantage of avoiding the complexities in minimization of cryogenic thermal links, virtually reducing to zero the contact resistance and keeping the operating temperature of the superconductor constant, independently of instantaneous operating power.
- 23 February 2021
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 34 (4) , 045008
Using a Josephson junction as an effective on-chip temperature sensor
Temperature sensing and control are essential in experiments running in cryocooled systems, as with the case of liquid helium-free superconducting devices. A Josephson junction as on-chip temperature sensor operated in ac provides the highest sensitivity and minimal power loading to the cryogenic environment, thanks to the noise rejection of lock-in detection. To demonstrate the advantages of on-chip sensing, we tested it with a Josephson voltage standard array in cryocooler and compared with the conventional case of a sensor on the cold surface of the refrigerator, showing that the power dissipated within the chip may further increment the device temperature up to some tenths of kelvin. An ac Josephson junction sensor is proven to be capable of directly stabilizing the temperature of the superconductive circuit from fluctuations of dissipated power during operation. Reliability issues related to flux trapping are discussed and solutions are proposed suited to different applications. Overall, on-chip control with ac Josephson temperature sensing has the advantage of avoiding the complexities in minimization of cryogenic thermal links, virtually reducing to zero the contact resistance and keeping the operating temperature of the superconductor constant, independently of instantaneous operating power.
- 24 July 2020
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 31 (10) , 104006
Differential readings of capacitance-based controls of attitude and displacements at the micro/nano scale
Four-quadrant plane capacitive sensors with electrodes made by thick metal plates were used in a novel configuration of a bridge-based circuit for measurement of both displacement and small angles over two axes. Their design, fabrication and testing by means of a specifically designed differential set-up is presented and discussed in terms of the measurement model, considerations of signal recovery, linearity, resolution, and noise. Numerical calculations of the capacitors, including corrective terms for fringe effects and tilt between electrodes in a differential configuration, are developed to simulate the overall measuring system. Tests of the model were then performed and validated by means of a comparison with the results of displacement and small angle rotation runs traced by an interferometer and an autocollimator. Sensitivities of approximately 0.11 V µm −1 with a 1 × 10 −3 relative standard deviation, and of 0.13 V mrad −1 with a 3 × 10 −3 relative standard deviation, were determined, with displacements of up to ±50 µm and yaw rotations of up to ±10 mrad.
- 24 July 2020
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 31 (10) , 104006
Differential readings of capacitance-based controls of attitude and displacements at the micro/nano scale
Four-quadrant plane capacitive sensors with electrodes made by thick metal plates were used in a novel configuration of a bridge-based circuit for measurement of both displacement and small angles over two axes. Their design, fabrication and testing by means of a specifically designed differential set-up is presented and discussed in terms of the measurement model, considerations of signal recovery, linearity, resolution, and noise. Numerical calculations of the capacitors, including corrective terms for fringe effects and tilt between electrodes in a differential configuration, are developed to simulate the overall measuring system. Tests of the model were then performed and validated by means of a comparison with the results of displacement and small angle rotation runs traced by an interferometer and an autocollimator. Sensitivities of approximately 0.11 V µm −1 with a 1 × 10 −3 relative standard deviation, and of 0.13 V mrad −1 with a 3 × 10 −3 relative standard deviation, were determined, with displacements of up to ±50 µm and yaw rotations of up to ±10 mrad.
- 22 May 2020
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 13 (5) , 054057
Practical Applications of Quantum Sensing: A Simple Method to Enhance the Sensitivity of Nitrogen-Vacancy-Based Temperature Sensors
Nitrogen-vacancy centers in diamond allow measurement of environment properties such as temperature, magnetic and electric fields at the nanoscale level, of utmost relevance for several research fields, ranging from nanotechnologies to biosensing. The working principle is based on the measurement of the resonance frequency shift of a single nitrogen-vacancy center (or an ensemble of them), usually detected by monitoring the center photoluminescence emission intensity. Albeit several schemes have already been proposed, the search for the simplest and most effective one is of key relevance for real applications. Here we present a continuous-wave lock-in-based technique able to reach high sensitivity in temperature measurement at microscale or nanoscale volumes (4.8 in ). Furthermore, the present method has the advantage of being insensitive to environmental magnetic noise that in general introduces a bias in the temperature measurement.- 22 May 2020
- Published by American Physical Society (APS) in Physical Review Applied
- Vol. 13 (5) , 054057
Practical Applications of Quantum Sensing: A Simple Method to Enhance the Sensitivity of Nitrogen-Vacancy-Based Temperature Sensors
Nitrogen-vacancy centers in diamond allow measurement of environment properties such as temperature, magnetic and electric fields at the nanoscale level, of utmost relevance for several research fields, ranging from nanotechnologies to biosensing. The working principle is based on the measurement of the resonance frequency shift of a single nitrogen-vacancy center (or an ensemble of them), usually detected by monitoring the center photoluminescence emission intensity. Albeit several schemes have already been proposed, the search for the simplest and most effective one is of key relevance for real applications. Here we present a continuous-wave lock-in-based technique able to reach high sensitivity in temperature measurement at microscale or nanoscale volumes (4.8 in ). Furthermore, the present method has the advantage of being insensitive to environmental magnetic noise that in general introduces a bias in the temperature measurement.- 25 February 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 9 (7) , 1264-1270
Thermal Performances of an Improved Package for Cryocooled Josephson Standards
Complex cryogenics still represents a strong limitation to the spread of Josephson voltage standards and cryogen-free cooling is particularly suitable to simplify their operation. The main downsides of liquid helium-free systems are related to the chip thermalization: indeed, at low temperature the heat transfer between the chip and the coldplate of a cryocooler in vacuum is strongly affected by the quality of the interfaces. In order to increase the thermal performances of cryocooled programmable Josephson standards we devised and tested a special cryopackage: the chip is embedded into a sandwich structure with high thermal conductivity materials subject to a controlled mechanical pressure to reduce thermal contact resistances. A thin sapphire lamina placed upon the chip allows the heat to be dissipated from the top, thus creating an additional path for the thermal flow. A special bridge-like system with a screw is used as reproducible torque-to-force converter to exert known pressures to the sandwich. Furthermore, we analyzed the effect of thermal contraction to the actual pressure exerted on the chip, showing a non-negligible increase when cooled down to cryogenic temperature that can be calculated and corrected for.
- 25 February 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 9 (7) , 1264-1270
Thermal Performances of an Improved Package for Cryocooled Josephson Standards
Complex cryogenics still represents a strong limitation to the spread of Josephson voltage standards and cryogen-free cooling is particularly suitable to simplify their operation. The main downsides of liquid helium-free systems are related to the chip thermalization: indeed, at low temperature the heat transfer between the chip and the coldplate of a cryocooler in vacuum is strongly affected by the quality of the interfaces. In order to increase the thermal performances of cryocooled programmable Josephson standards we devised and tested a special cryopackage: the chip is embedded into a sandwich structure with high thermal conductivity materials subject to a controlled mechanical pressure to reduce thermal contact resistances. A thin sapphire lamina placed upon the chip allows the heat to be dissipated from the top, thus creating an additional path for the thermal flow. A special bridge-like system with a screw is used as reproducible torque-to-force converter to exert known pressures to the sandwich. Furthermore, we analyzed the effect of thermal contraction to the actual pressure exerted on the chip, showing a non-negligible increase when cooled down to cryogenic temperature that can be calculated and corrected for.
- Open Access
- 1 October 2018
- Published by Elsevier in Data in Brief
- Vol. 20, 1468-1470
Data of cryocooler temperature dynamical response to time-varying power inputs at 4 K
- 1 October 2018
- Published by Elsevier in Data in Brief
- Vol. 20, 1468-1470
Open AccessData of cryocooler temperature dynamical response to time-varying power inputs at 4 K
- Open Access
- 1 August 2018
- Published by Elsevier in International Journal of Refrigeration
- Vol. 92, 125-132
Experimental analysis of the thermal behavior of a GM cryocooler based on linear system theory
- 1 August 2018
- Published by Elsevier in International Journal of Refrigeration
- Vol. 92, 125-132
Open AccessExperimental analysis of the thermal behavior of a GM cryocooler based on linear system theory