Ameer Janabi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Ameer Janabi has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Teng Long
Department of Engineering, University of Cambridge, Cambridge, UK
4 shared publications - Bingsen Wang
Propulsion Systems, Stellantis, Auburn Hills, MI, USA
3 shared publications - Wei Mu
University of Cambridge
3 shared publications - Borong Hu
Electrical Engineering Division, Department of Engineering, University of Cambridge, Cambridge, U.K.
2 shared publications Chingchi Chen
2 shared publications- Ke Zou
Ford Motor Company, Dearborn, MI, USA
2 shared publications
Latest Publications
- Open Access
- 22 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (3) , 3171-3176
Repairable, Recyclable, and Reliable Power Electronics Using Liquid Metal Interconnection
The progression of power electronics technologies prioritizes efficiency and power density, often paying scant attention to the converter’s own lifecycle environmental impact, resulting in significant and unnecessary waste. Traditional packaging and assembling methods of power electronic devices and converters rely on rigid bonding, such as soldering and sintering, to interconnect parts, causing challenges of disassembling and separating parts when repairing and recycling are needed. This letter introduces liquid metal (LM) as a bonding mechanism in power electronic device packaging and converter assembling. The fluidic interconnection using LM is invented to enable parts separation and thermomechanical stress reduction without compromising electrical performance. Therefore, repairable, recyclable, and reliable power electronics is achieved. Straightforward assembling and disassembling processes are demonstrated by a real repair case of the LM-based power stage. Electrical performance is validated by a buck converter, achieving an efficiency of up to 98.2%.
- 22 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (3) , 3171-3176
Open AccessRepairable, Recyclable, and Reliable Power Electronics Using Liquid Metal Interconnection
The progression of power electronics technologies prioritizes efficiency and power density, often paying scant attention to the converter’s own lifecycle environmental impact, resulting in significant and unnecessary waste. Traditional packaging and assembling methods of power electronic devices and converters rely on rigid bonding, such as soldering and sintering, to interconnect parts, causing challenges of disassembling and separating parts when repairing and recycling are needed. This letter introduces liquid metal (LM) as a bonding mechanism in power electronic device packaging and converter assembling. The fluidic interconnection using LM is invented to enable parts separation and thermomechanical stress reduction without compromising electrical performance. Therefore, repairable, recyclable, and reliable power electronics is achieved. Straightforward assembling and disassembling processes are demonstrated by a real repair case of the LM-based power stage. Electrical performance is validated by a buck converter, achieving an efficiency of up to 98.2%.
- 25 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (1) , 43-49
Towards the True Zero-Voltage-Switching Boundary
Aiming for high-efficiency and high power-density converters—where turn-on loss normally dominates overall losses—zero-voltage-switching (ZVS) techniques are the most popular approach to eliminate turn-on loss. Notably, inaccurate ZVS boundaries can misguide design, causing under- and/or over-engineering of the load current, resulting in a loss of ZVS and/or excessive conduction and turn-off losses, thereby preventing optimal performance. However, this article reports a discovery, through experimental measurement, that state-of-the-art models can produce significant errors ranging from 18% to 59%. In this article, the work presents an in-depth study of the true zero-voltage switching boundary (TZVSB). An analytical overview of existing prediction methods is provided first. To accurately identify the TZVSB, a groundbreaking model is proposed and experimentally validated, incorporating previously unaccounted impact factors—including other capacitances, such as snubber capacitances, parasitic capacitances of magnetics and PCBs, long dead-time effects, dissipated energies, and asymmetry between upper and lower switches. As a result, the proposed model achieves unprecedentedly low errors ranging from 0.09% to 3.6%. Furthermore, it establishes, for the first time, the fundamental equivalence between energy-based and charge-based analyses, thereby unifying the two mainstream analytical frameworks that have remained disconnected for decades and validating their theoretical foundations.
- 25 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (1) , 43-49
Towards the True Zero-Voltage-Switching Boundary
Aiming for high-efficiency and high power-density converters—where turn-on loss normally dominates overall losses—zero-voltage-switching (ZVS) techniques are the most popular approach to eliminate turn-on loss. Notably, inaccurate ZVS boundaries can misguide design, causing under- and/or over-engineering of the load current, resulting in a loss of ZVS and/or excessive conduction and turn-off losses, thereby preventing optimal performance. However, this article reports a discovery, through experimental measurement, that state-of-the-art models can produce significant errors ranging from 18% to 59%. In this article, the work presents an in-depth study of the true zero-voltage switching boundary (TZVSB). An analytical overview of existing prediction methods is provided first. To accurately identify the TZVSB, a groundbreaking model is proposed and experimentally validated, incorporating previously unaccounted impact factors—including other capacitances, such as snubber capacitances, parasitic capacitances of magnetics and PCBs, long dead-time effects, dissipated energies, and asymmetry between upper and lower switches. As a result, the proposed model achieves unprecedentedly low errors ranging from 0.09% to 3.6%. Furthermore, it establishes, for the first time, the fundamental equivalence between energy-based and charge-based analyses, thereby unifying the two mainstream analytical frameworks that have remained disconnected for decades and validating their theoretical foundations.
- Open Access
- 8 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Current Balancing Strategy for Paralleled SiC MOSFETS in Extremely Low Inductance Regime
In the context of paralleled Silicon Carbide (SiC) dies at low stray inductance, the current imbalance proves to be exceptionally sensitive to the static parameters of the devices. Even under conditions of full layout symmetry, significant current mismatch persists. This issue becomes prominent in emerging technologies utilizing standard cell design and die embedding, characterized by low stray power loop inductance. Traditional packages with relatively high stray inductance do not exhibit this particular problem. Addressing the challenges posed by these low-inductance technologies, this paper introduces a passive current-sharing method employing AC-coupled inductor. The proposed method is demonstrated through the implementation of a highly integrated converter with power loop inductance less than 1 nH. Notably, the presented approach is straightforward to implement and achieves near-perfect current sharing among paralleled dies, thereby facilitating the realization of high-current rating converters.
- 8 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessCurrent Balancing Strategy for Paralleled SiC MOSFETS in Extremely Low Inductance Regime
In the context of paralleled Silicon Carbide (SiC) dies at low stray inductance, the current imbalance proves to be exceptionally sensitive to the static parameters of the devices. Even under conditions of full layout symmetry, significant current mismatch persists. This issue becomes prominent in emerging technologies utilizing standard cell design and die embedding, characterized by low stray power loop inductance. Traditional packages with relatively high stray inductance do not exhibit this particular problem. Addressing the challenges posed by these low-inductance technologies, this paper introduces a passive current-sharing method employing AC-coupled inductor. The proposed method is demonstrated through the implementation of a highly integrated converter with power loop inductance less than 1 nH. Notably, the presented approach is straightforward to implement and achieves near-perfect current sharing among paralleled dies, thereby facilitating the realization of high-current rating converters.
- Open Access
- 6 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (8) , 9614-9628
Substrate Embedded Power Electronics Packaging for Silicon Carbide mosfets
This article proposes a new power electronic packaging for discrete dies, namely, a standard cell, which consists of a step-etched active metal brazing (AMB) substrate and a flexible printed circuit board (flex-PCB). The standard cell exhibits high thermal conductivity, complete electrical insulation, and low stray inductance, thereby enhancing the performance of SiC mosfet devices. The standard cell has a stray power loop inductance of less than $\text{1}\,\text{nH}$ and a gate loop inductance of less than $\text{1.5}\,\text{nH}$ . The standard cell has a flat body with surface-mounting electrical connections on one side and direct thermal connections on the other. The use of flex-PCB die interconnection enables maximum utilization of source pads while providing a flexible gate-source connection and the converter PCB. This article presents the design concept of the standard cell and experimentally validates its effectiveness in a converter system.
- 6 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (8) , 9614-9628
Open AccessSubstrate Embedded Power Electronics Packaging for Silicon Carbide mosfets
This article proposes a new power electronic packaging for discrete dies, namely, a standard cell, which consists of a step-etched active metal brazing (AMB) substrate and a flexible printed circuit board (flex-PCB). The standard cell exhibits high thermal conductivity, complete electrical insulation, and low stray inductance, thereby enhancing the performance of SiC mosfet devices. The standard cell has a stray power loop inductance of less than $\text{1}\,\text{nH}$ and a gate loop inductance of less than $\text{1.5}\,\text{nH}$ . The standard cell has a flat body with surface-mounting electrical connections on one side and direct thermal connections on the other. The use of flex-PCB die interconnection enables maximum utilization of source pads while providing a flexible gate-source connection and the converter PCB. This article presents the design concept of the standard cell and experimentally validates its effectiveness in a converter system.
- Open Access
- 27 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (7) , 7808-7814
Liquid Metal Fluidic Connection and Floating Die Structure for Ultralow Thermomechanical Stress of SiC Power Electronics Packaging
Coefficients of thermal expansion (CTE) of various materials in packaging structure layers vary largely, causing significant thermomechanical stress in power electronic packages during operation. For wirebondless SiC modules, the stress is even larger due to the structure's rigidity and the high Young's modulus of SiC crystals. This letter takes a flexible printed circuit board (FPCB)/die/active metal brazed (AMB) packaging stack as an example to prove the feasibility of floating die structure enabled by liquid metal (LM) fluidic connection. The CTE mismatch among the die, printed circuit board, and AMB substrate is decoupled by the LM layer without compromise of thermal and electrical conduction. The finite-element analysis demonstrates a 56% reduction in von Mises stress of the device and more than 99% shear stress reduction at the FPCB-AMB interface, compared with a conventional rigid solder connection. Testing results show that LM-based packaging has a similar thermal and electrical conduction and higher breakdown voltage when compared with the soldered counterpart. Accelerated thermal cycling aging tests validate the stability of the insulation ring for LM-based packaging, especially under high-temperature conditions. The feasibility of using LM fluidic interconnections for a floating die structure of SiC packaging is validated.
- 27 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (7) , 7808-7814
Open AccessLiquid Metal Fluidic Connection and Floating Die Structure for Ultralow Thermomechanical Stress of SiC Power Electronics Packaging
Coefficients of thermal expansion (CTE) of various materials in packaging structure layers vary largely, causing significant thermomechanical stress in power electronic packages during operation. For wirebondless SiC modules, the stress is even larger due to the structure's rigidity and the high Young's modulus of SiC crystals. This letter takes a flexible printed circuit board (FPCB)/die/active metal brazed (AMB) packaging stack as an example to prove the feasibility of floating die structure enabled by liquid metal (LM) fluidic connection. The CTE mismatch among the die, printed circuit board, and AMB substrate is decoupled by the LM layer without compromise of thermal and electrical conduction. The finite-element analysis demonstrates a 56% reduction in von Mises stress of the device and more than 99% shear stress reduction at the FPCB-AMB interface, compared with a conventional rigid solder connection. Testing results show that LM-based packaging has a similar thermal and electrical conduction and higher breakdown voltage when compared with the soldered counterpart. Accelerated thermal cycling aging tests validate the stability of the insulation ring for LM-based packaging, especially under high-temperature conditions. The feasibility of using LM fluidic interconnections for a floating die structure of SiC packaging is validated.
- 14 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (8) , 7729-7734
A Simple Phase-Shift Modulation Using Parabolic Carrier for Dual Active Bridge DC–DC Converter
- 14 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (8) , 7729-7734
A Simple Phase-Shift Modulation Using Parabolic Carrier for Dual Active Bridge DC–DC Converter
- 4 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (5) , 5437-5446
Generalized Chudnovsky Algorithm for Real-Time PWM Selective Harmonic Elimination/Modulation: Two-Level VSI Example
This paper presents a novel approach to significantly reducing the mathematical complexity associated with the selective harmonic elimination (SHE), which allows for the real-time implementation of SHE with a reasonable utilization of the computational power of the digital controller. First, the transcendental equations of the optimization problem are converted to set algebraic equations using Chebyshev polynomials. Second, the set of algebraic equations is reduced to a single univalent polynomial using generalized Newton's identities. The roots of the polynomial hold a unique solution to the optimization problem. We show that the roots of the univalent polynomial can be solved in real-time by direct substitution with no initial guess or iteration. The proposed method is a generalization of a Chudnovsky algorithm; it allows the modulation of the selected harmonics rather than eliminating them. Furthermore, the technique by which the roots of the polynomial are obtained enables one to implement the algorithm in real-time with determinate execution time. This paper lay the groundwork for presenting the generalized algorithm through a two-level voltage source inverter (VSI) drive. More application will follow in the near future.
- 4 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 35 (5) , 5437-5446
Generalized Chudnovsky Algorithm for Real-Time PWM Selective Harmonic Elimination/Modulation: Two-Level VSI Example
This paper presents a novel approach to significantly reducing the mathematical complexity associated with the selective harmonic elimination (SHE), which allows for the real-time implementation of SHE with a reasonable utilization of the computational power of the digital controller. First, the transcendental equations of the optimization problem are converted to set algebraic equations using Chebyshev polynomials. Second, the set of algebraic equations is reduced to a single univalent polynomial using generalized Newton's identities. The roots of the polynomial hold a unique solution to the optimization problem. We show that the roots of the univalent polynomial can be solved in real-time by direct substitution with no initial guess or iteration. The proposed method is a generalization of a Chudnovsky algorithm; it allows the modulation of the selected harmonics rather than eliminating them. Furthermore, the technique by which the roots of the polynomial are obtained enables one to implement the algorithm in real-time with determinate execution time. This paper lay the groundwork for presenting the generalized algorithm through a two-level voltage source inverter (VSI) drive. More application will follow in the near future.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 143-150
Design, and Control of a SiC Isolated Bidirectional Power Converter for V2L Applications to both DC and AC Load
EV can help export its unused energy to the external load (such as home appliance) when the vehicle is stationary. Hence a bidirectional power converter with such function is of need. Due to the safety concern, a galvanic isolation transformer is required. This paper presents an isolated universal power converter which can perform vehicle to load (V2L) feature for both AC load and DC load in one single unit. Design details such as SiC MOSFET gate drive and high frequency isolation transformer are disclosed in this paper. Control algorithm and analysis for both operation modes are also performed. Experimental results are shown to validate the hardware design and control algorithm development.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 143-150
Design, and Control of a SiC Isolated Bidirectional Power Converter for V2L Applications to both DC and AC Load
EV can help export its unused energy to the external load (such as home appliance) when the vehicle is stationary. Hence a bidirectional power converter with such function is of need. Due to the safety concern, a galvanic isolation transformer is required. This paper presents an isolated universal power converter which can perform vehicle to load (V2L) feature for both AC load and DC load in one single unit. Design details such as SiC MOSFET gate drive and high frequency isolation transformer are disclosed in this paper. Control algorithm and analysis for both operation modes are also performed. Experimental results are shown to validate the hardware design and control algorithm development.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 2044-2049
Switched-Capacitor Voltage Boost Converter for Electric and Hybrid Electric Vehicle Drives
This article presents a switched-capacitor (SC) voltage boost converter and its control methods for implementing dc-ac and ac-dc power conversion. The SC converter employs a switched-capacitor circuit augmented with the main converter circuit to the power source, thus providing unique features that cannot be attained by the traditional voltage-source inverter (VSI) or boost VSI. The additional features include doubling the area of the linear modulation region and eliminating both the large inductor in the boost dc-dc stage and the large filtering capacitor, which leads to a higher energy density and lower cost. The SC converter concept can be applied to all dc-ac, ac-dc, ac-ac, and dc-dc power conversions. To describe the operating principle and the control, we focus on one example: a bidirectional SC converter for dc-ac and ac-dc power conversion in electric and hybrid electric vehicles. This paper is accompanied by a video demonstrating the change of the modulation functions with the value of A.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 2044-2049
Switched-Capacitor Voltage Boost Converter for Electric and Hybrid Electric Vehicle Drives
This article presents a switched-capacitor (SC) voltage boost converter and its control methods for implementing dc-ac and ac-dc power conversion. The SC converter employs a switched-capacitor circuit augmented with the main converter circuit to the power source, thus providing unique features that cannot be attained by the traditional voltage-source inverter (VSI) or boost VSI. The additional features include doubling the area of the linear modulation region and eliminating both the large inductor in the boost dc-dc stage and the large filtering capacitor, which leads to a higher energy density and lower cost. The SC converter concept can be applied to all dc-ac, ac-dc, ac-ac, and dc-dc power conversions. To describe the operating principle and the control, we focus on one example: a bidirectional SC converter for dc-ac and ac-dc power conversion in electric and hybrid electric vehicles. This paper is accompanied by a video demonstrating the change of the modulation functions with the value of A.
- 8 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (2) , 1595-1610
Hybrid SVPWM Scheme to Minimize the Common-Mode Voltage Frequency and Amplitude in Voltage Source Inverter Drives
In this paper, a hybrid space vector pulse width modulation synthesis (HSVPWMS) is proposed to lower the frequency and amplitude of the CMV. The conventional space vector pulse width modulation (SVPWM) techniques for inverters generate a high-frequency common-mode voltage (CMV). The CMV causes significant bearing current flowing through the path to the ground and leads to premature bearing failure, especially in high switching frequency drive systems. Furthermore, previously proposed CMV reduction studies focus on the reduction of CMV amplitude, leaving a high frequency CMV. The proposed control algorithm divides each sector in the space vector hexagon into three segments based on the modulation index and the angle of the reference voltage vector. In each segment, the space vectors that produce minimal CMV are selected to synthesize the reference voltage vector. A fair comparison with the conventional CMV reduction methods is made by comparing the CMV characteristics, harmonic distortion factor (HDF), DC current ripple, and the switching losses for each method. Both simulation and experimental results have validated the effectiveness of the proposed approach.
- 8 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 34 (2) , 1595-1610
Hybrid SVPWM Scheme to Minimize the Common-Mode Voltage Frequency and Amplitude in Voltage Source Inverter Drives
In this paper, a hybrid space vector pulse width modulation synthesis (HSVPWMS) is proposed to lower the frequency and amplitude of the CMV. The conventional space vector pulse width modulation (SVPWM) techniques for inverters generate a high-frequency common-mode voltage (CMV). The CMV causes significant bearing current flowing through the path to the ground and leads to premature bearing failure, especially in high switching frequency drive systems. Furthermore, previously proposed CMV reduction studies focus on the reduction of CMV amplitude, leaving a high frequency CMV. The proposed control algorithm divides each sector in the space vector hexagon into three segments based on the modulation index and the angle of the reference voltage vector. In each segment, the space vectors that produce minimal CMV are selected to synthesize the reference voltage vector. A fair comparison with the conventional CMV reduction methods is made by comparing the CMV characteristics, harmonic distortion factor (HDF), DC current ripple, and the switching losses for each method. Both simulation and experimental results have validated the effectiveness of the proposed approach.