Liquid Metal Fluidic Connection and Floating Die Structure for Ultralow Thermomechanical Stress of SiC Power Electronics Packaging
Open Access
- 27 March 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (7) , 7808-7814
Abstract
Coefficients of thermal expansion (CTE) of various materials in packaging structure layers vary largely, causing significant thermomechanical stress in power electronic packages during operation. For wirebondless SiC modules, the stress is even larger due to the structure's rigidity and the high Young's modulus of SiC crystals. This letter takes a flexible printed circuit board (FPCB)/die/active metal brazed (AMB) packaging stack as an example to prove the feasibility of floating die structure enabled by liquid metal (LM) fluidic connection. The CTE mismatch among the die, printed circuit board, and AMB substrate is decoupled by the LM layer without compromise of thermal and electrical conduction. The finite-element analysis demonstrates a 56% reduction in von Mises stress of the device and more than 99% shear stress reduction at the FPCB-AMB interface, compared with a conventional rigid solder connection. Testing results show that LM-based packaging has a similar thermal and electrical conduction and higher breakdown voltage when compared with the soldered counterpart. Accelerated thermal cycling aging tests validate the stability of the insulation ring for LM-based packaging, especially under high-temperature conditions. The feasibility of using LM fluidic interconnections for a floating die structure of SiC packaging is validated.Keywords
This publication has 20 references indexed in Scilit:
- From Droplets to Devices: Recent Advances in Liquid Metal Droplet Enabled ElectronicsAdvanced Functional Materials, 2023
- A Double-Sided Cooled Split-Phase SiC Power Module With Fuzz Button InterposerIEEE Journal of Emerging and Selected Topics in Power Electronics, 2023
- Thermal Characteristics of Liquid Metal Interconnects for Power Semiconductors2023
- Thermal stress reduction strategy for high-temperature power electronics with Ag sinteringMicroelectronics Reliability, 2021
- Interfacial Tension Modulation of Liquid Metal via Electrochemical OxidationAdvanced Intelligent Systems, 2021
- Corrosion inhibition of copper in ferric chloride solutions with organic inhibitorsnpj Materials Degradation, 2020
- Finite Element and Experimental Analysis of Spacer Designs for Reducing the Thermomechanical Stress in Double-Sided Cooling Power ModulesIEEE Journal of Emerging and Selected Topics in Power Electronics, 2020
- Reliability Improvement of a Double-Sided IGBT Module by Lowering Stress Gradient Using Molybdenum BuffersIEEE Journal of Emerging and Selected Topics in Power Electronics, 2019
- Planar Power Module With Low Thermal Impedance and Low Thermomechanical StressIEEE Transactions on Components, Packaging and Manufacturing Technology, 2012
- Liquid Metal Vertical Interconnects for Flip-Chip Assembly of GaAs C-Band Power Amplifiers onto Micro-Rectangular Coaxial Transmission Lines2011