AHAntonio Hospitaler

Antonio Hospitaler

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Antonio Hospitaler has a total of 89 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Introducción al cálculo sísmico con OpenSees en Python

    by Luis Iván Velasco Enríquez, Edgar Tapia Hernández, Antonio Hospitaler Pérez, Héctor Guerrero Bobadilla, Brian Jordano Cagua Gómez, Julia Edith Pilatasig Caizaguano, Oscar Sámano Brito, Sergio Gil Guerrero García

    Este libro reúne los conocimientos y experiencias de diversos investigadores e inves­tigadoras en el uso de OpenSees, un programa de análisis estructural ampliamente reconocido en la comunidad académica internacional por su eficiencia para realizar simulaciones sísmicas. Comienza con una introducción a Python, donde se presentan los comandos y estructuras básicas del lenguaje y se desarrolla a través de ejemplos que abordan temas como análisis estáticos y dinámicos, efectos no lineales (tanto geométricos como de materiales), evaluación del desempeño sísmico de estructuras e implementación de sistemas de protección sísmica. Cada uno de estos ejemplos incluye tanto una introducción teórica de los conceptos tratados como el código ne­cesario para su reproducción. Considerando las tendencias actuales en programación, todos los ejemplos expues­tos se realizan mediante la librería OpenSeesPy, que permite ejecutar OpenSees en un entorno Python. Gracias a su enfoque de aproximación gradual a OpenSees y a la incorporación de conceptos de dificultad creciente, esta obra está pensada para ser de utilidad tanto a estudiantes como a docentes e investigadores que deseen profundizar en el campo de la ingeniería sísmica.

  • Open Access

    Additional Fire Exposure Time for the Effect of Spalling in Reinforced Concrete Columns

    by D. L. Peña, C. Ibáñez, V. Albero, A. Hospitaler

    Concrete exposed to fire can experience spalling when the pore pressure increases due to water evaporation resulting in damage to part of the concrete cross-section which causes the loss of the initial cross-sectional symmetry, both thermal and geometrical. This may lead to what is, in essence, a biaxial bending problem in reinforced concrete columns. This study does not deal with the prediction of the occurrence of spalling for which a fully coupled hygro-thermo-mechanical analysis would be required. This work evaluates the consequences that corner spalling and surface spalling have on the fire resistance of reinforced concrete columns and presents a methodology based on the determination of a modified fire resistance time. An advanced fiber based numerical model for evaluating the fire resistance of RC sections exposed to fire is used as a tool to analyse the effect that spalling has on the performance of the columns. The model is able to generate the interaction surfaces of the columns subjected to uniaxial or biaxial bending and 4-sided exposed to the standard fire curve ISO 834. After a parametric analysis, it is observed that the negative effect of spalling can be quantified by means of an additional fire exposure time, which ranges between 0–35 min and depends on the column cross-section configuration, dimensions and load level. Finally, a proposal for the calculation of the modified fire resistance time for the effect of spalling is presented, which may be beneficial for practitioners in design.


  • HEURISTIC OPTIMIZATION OF THE FOUNDATION OF A DYNAMICALLY STRESSED ROTATING MACHINE USING THE LATE ACCEPTANCE HILL CLIMBING (LAHC) ALGORITHM

    by Juan Luis Terradez Marco, Antonio Hospitaler Perez, Vicente Albero Gabarda

    This paper proposal the optimization of a foundation for rotative machine under dynamic loads in transient and permanent working mode. The foundation depends on fix parameters and 37 variables. Functional constraints are defined for the foundation. A cost function depending on the variables is defined to be minimized to find the optimal. From all the possible solutions, only are selected the ones that validate the constrains and minimize the cost function. The search of the optimal solution is made with an algorithm of random search by “neighbouring of one point” called Last Acceptance Hill Climbing(LAHC). It is an algorithm of the type called “Adaptative Memory Programming” (AMP) that accepts worse solutions to get the local minimum and learns of the results of the search. The algorithm only depends on the length of the comparison vector and the stop criteria. 350 experiences were made with different length of the comparison vector. It was analysed the quality of the optimal solutions got it with each length of the vector. Quality of the set of solutions was compared fitting them to a 3 parameters Weibull distribution. Este artículo propone la optimización de un modelo de cimentación para máquinas rotativas sometidas a esfuerzos dinámicos en régimen transitorio y permanente. El modelo de cimentación tiene parámetros fijos y 37 variables. Se definen restricciones funcionales de la cimentación. Se determina la función “coste” de la cimentación que depende de estas variables. De todas las soluciones posibles interesa escoger aquellas que cumplen las restricciones impuestas y que minimizan la función coste. Para determinar las soluciones optimas se emplea un algoritmo de búsqueda aleatoria por entornos de un solo punto denominado Last Acceptance Hill Climbing. Algoritmo de los denominados “Adaptative Memory Programming” (AMP), que acepta soluciones peores para alcanzar el óptimo local y aprende de los resultados obtenidos; el esquema de búsqueda solo depende del número de valores del vector comparación y del criterio de parada. Se realizan 350 experimentos con distintas longitudes del vector de comparación. Se analiza la longitud optima del vector comparación, el óptimo de la función coste y la proximidad al óptimo teórico ajustando a una distribución de Weibull de 3 parámetros el conjunto de óptimos

  • Open Access

    Metodología para el cálculo de los cimientos de una máquina rotativa que soporta cargas dinámicas incluido el arranque transitorio = A methodology for the calculation of the foundation of a rotary machine supporting dynami c loads including the transient star ting

    by Juan Luis Terrádez Marco, Antonio Hospitaler Pérez

    Resumen— A menudo, los ingenieros resuelven problemas en relación con estructuras y cimientos desde el punto de vista de la estática estructural. Nada tan lejos de la realidad cuando finalmente, en la estructura o los cimientos, se instala una máquina. Las cargas producidas por las máquinas cambian con el tiempo y no serán constantes. Las partes que formaron una máquina generalmente se mueven y transmiten a la estructura cargas dinámicas que cambian con el tiempo. Pensar en cargas dinámicas significa considerar la variable "tiempo" para calcular una base o una estructura. Una parte de la energía desperdiciada por la máquina se transforma en radiación de la vibración de la máquina y se transmite al suelo (Richart et al., 1970). Durante el transitorio para obtener la velocidad nominal de la máquina, el sistema puede cruzar su "frecuencia natural" y colapsar por un exceso de amplitud de vibración (Richart et al., 1970; Arya et al., 1979; Chowdhury & Dasgupta, 2009). Las ecuaciones diferenciales de D'Alambert basadas en la analogía de Lysmer & Richart (1966) se aplicaron en el dominio del tiempo para estudiar el movimiento vertical, deslizamiento y balanceo (Barkan, 1962) de la base del conjunto - máquina de bloque inercial. Las ecuaciones diferenciales se integraron con un esquema de pasos de tiempo (Chowdhury & Dasgupta, 2009), el método β de Newmark (1959), obteniendo la amplitud de vibración, velocidad, aceleración y fuerza en el modo de operación transitoria y permanente. La metodología se aplicó a una máquina rotativa que funciona a 3.000 r.pm. con un bloque inercial y una base de bloque, un problema de 3 masas con 37 variables. El suelo, sus parámetros e impedancia se calculan aplicando la Norma ACI 351.3R-04 (2004). Las cargas dinámicas se calcularon de acuerdo con la norma ACI 351.3R-04, las normas API estándar 613 (Arya et al., 1979) y la norma ISO 1940/1 (2003). Se desarrolló un programa MATLAB para resolver las ecuaciones diferenciales D’Alambert y obtener la amplitud de vibración, velocidad, aceleración y fuerza cambiando la velocidad de la máquina durante los primeros 3.000 segundos desde 0 a 3.000 segundos con diferentes funciones de arranque (Rodriguez et al., 2010). El programa generó soluciones aleatorias de las 37 variables. El programa permitió corregir restricciones a la solución calculada. Se aplicó un conjunto de reglas al modo de operación transitorio y permanente de la máquina (Rodriguez et al., 2010). Los límites, extraídos de la Norma ISO, de la amplitud de vibración, velocidad, aceleración y fuerza en el modo de operación transitoria y permanente se aplicaron para obtener la solución correcta. Finalmente, esta metodología permite aplicar metaheurísticas para optimizar el costo de la fundación. Abstract Often engineers solve problems in relationship with structures and foundations from the point of view of structural statics. Nothing so far of the reality when finally, on the structure or the foundation, is installed a machine. Loads produced by machines change with time and will not be constant. The parts that made a machine are usually moving and they transmit to the structure dynamics loads which change with time. Thinking in dynamics loads means consider the variable “time” to calculate a foundation or a structure. A part of the energy wasted by the machine is transformed in radiation from the vibration of the machine and transmitted to the soil (Richart et al., 1970). During the transient to get the nominal speed of the machine, the system can cross its “natural frequency” and collapse by an excess of amplitude of vibration (Richart et al., 1970; Arya et al., 1979; Chowdhury & Dasgupta, 2009). D’Alambert differential equations based in the Lysmer’s analogy (Lysmer & Richart, 1966) were applied in the time domain to study the vertical movement, sliding and rocking (Barkan, 1962) of the ensemble foundation – inertial block – machine. Equations differentials were integrated with a time-step scheme (Chowdhury & Dasgupta, 2009), the Newmark’s β method (Newmark, 1959), getting the amplitude of vibration, speed, acceleration and strength in the transient and in the permanent operation mode. Methodology was applied to a rotary machine working at 3.000 r.pm. with an inertial block and a block foundation, a 3-mass problem with 37 variables. The ground, its parameters and impedance are calculated applying the Norma ACI 351.3R-04 (2004). Dynamic loads were calculated in accordingto ACI Norm 351.3R-04, API Norms Standard 613 (Arya et al., 1979) and ISO Norm 1940/1 (2003). A MATLAB program was developed to solve the D’Alambert differential equations and get the amplitude of vibration, speed, acceleration and strength changing the speed of the machine during the first 3.000 seconds since 0 to 3.000 seconds with different starting functions (Rodriguez et al., 2010). Random solutions of the 37 variables were generated by the program. The program allowed to fix constraints to the solution calculated. A set of rules were applied to the transient and the permanent operation mode of the machine (Rodriguez et al., 2010). Limits, extracted from the ISO Norm, of the amplitude of vibration, speed, acceleration and strength in the transient and in the permanent operation mode were applied to get the right solution. Finally, this methodology permits to applied metaheuristics to optimize the cost of the foundation.

  • Fire design of slim‐floor beams

    by Manuel L. Romero, Vicente Albero, Ana Espinós, Antonio Hospitaler

    Slim‐floor beams are a well‐known and cost‐effective solution that permits a significant reduction of floor thickness, and are increasingly used in industrial and commercial buildings. Since only their lower flange is exposed to fire, slim‐floor beams may also achieve higher fire resistance, in comparison to other types of composite beams that are not fully embedded in the concrete floor. Simplified models are available in Eurocode 4 Parts 1‐2 to evaluate the temperature distribution for partially encased and non‐encased composite beams. However this standard does not provide any simplified model to evaluate the cross‐sectional temperature field of slim‐floor beams. In this sense, different proposals have been evaluated in recent years in order to provide simplified models for temperature evaluation. The currently available models in the literature have shown their accurate behaviour providing results on the safe side, and are recommended for use in practice. Finally, this work shows that slim‐floor composite beams can provide good performance during a fire event. Specifically, 60 min of standard fire rating can be achieved for load levels lower than 0.5–0.6. Improved behaviour to achieve 90 or 120 min of standard fire exposure may also be reached by using innovative solutions, advanced materials or external protection.


  • Open Access

    Sustainability Assessment of Constructive Solutions for Urban Spain: A Multi-Objective Combinatorial Optimization Problem

    by Simón Martínez, Cristina González, Antonio Hospitaler, Vicente Albero

    Industrial areas are set up on plots of roads and associated infrastructure. These use materials and machinery that have environmental impacts, and thus require constructive solutions throughout their lifecycles. In turn, these solutions and their components cause environmental impacts that can be measured by sustainability indicators. The concept of sustainability is closely tied to sustainable development, which is defined as “development that meets the needs of the present, without compromising the ability of future generations to meet their own needs”. The large number of possible and available solutions means that identifying the best one for a given road section must employ a set of heuristic techniques, which conceptualize the issue as a combinatorial optimization problem that is purely discrete and non-differential. The system chosen can be based on a genetic algorithm method that differentiates individuals based on three sustainability indicators: CO2 emissions, embedded energy (also known as embodied energy, defined as the energy expended to manufacture a product), and economic cost. In this paper, we supplement traditional cost analyses using a three-objective multi-objective genetic algorithm that considers the aforementioned criteria, thus addressing sustainability in aggregate planning. The procedure is applied to three objective functions—CO2 emissions, economic cost and embedded energy—for each possible solution. We used the non-dominated sorting genetic algorithm (NSGA-II) to implement multi-objective optimization in MATLAB. Additional results for a random walk and multi-objective search algorithm are shown. This study involved 26 design variables, with different ranks of variation, and the application of the algorithm generates results for the defined Pareto fronts. Our method shows that the optimal approach effectively solves a real-world multi-objective project planning problem, as our solution is one of the Pareto-optimal solutions generated by the NSGA-II.


  • Heat transfer analysis of concrete‐filled steel tubular columns to slim‐floor beam connections subjected to fire

    by Manuel L. Romero, Vicente Albero, Ana Espinös, Antonio Hospitaler, Ana M. Pascual

  • Open Access

    Valencia bridge fire tests: Experimental study of a composite bridge under fire

    by Jose Alos-Moya, Ignacio Paya-Zaforteza, Antonio Hospitaler, Paula Rinaudo


  • 10.21: Post-fire response of slender concrete-filled steel tubular columns

    by Carmen Ibañez, Vicente Albero, Ana Espinos, Manuel L. Romero, Antonio Hospitaler