Xabier Chamorro
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xabier Chamorro has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Daniel Bernal
Mechanical and Manufacturing Department, Mondragon University, Loramendi 4, 20500 Mondragon, Gipuzkoa, Spain
5 shared publications - Iñaki Hurtado
Mechanical and Manufacturing Department, Mondragon University, Loramendi 4, E20500 Arrasate-Mondragon, Gipuzkoa, Spain
5 shared publications - Nuria Herrero-Dorca
Mondragon Unibertsitatea
3 shared publications - Iñaki Madariaga
Materials and Processes Department, Industria de Turbopropulsores, SAU, Parque Tecnológico No 300, 48170 Zamudio, Spain
2 shared publications - Pablo Garcia-Michelena
Mechanical and Manufacturing Department, Mondragon University, 20500 Mondragon, Spain
2 shared publications - David Bürger
Institute for Materials, Ruhr University Bochum, Universitätsstr. 150, 44801 Bochum, Germany
1 shared publication
Latest Publications
- Open Access
Numerical Simulation of Free Surface Deformation and Melt Stirring in Induction Melting Using ALE and Level Set Methods
This study investigates fixed and moving mesh methodologies for modeling liquid metal–free surface deformation during the induction melting process. The numerical method employs robust coupling of magnetic fields with the hydrodynamics of the turbulent stirring of liquid metal. Free surface tracking is implemented using the fixed mesh level set (LS) and the moving mesh arbitrary Lagrangian–Eulerian (ALE) formulation. The model’s geometry and operating parameters are designed to replicate a semi-industrial induction melting furnace. Six case studies are analyzed under varying melt masses and coil power levels, with validation performed by comparing experimentally measured free surface profiles and magnetic field distributions. The melt’s stirring velocity and recirculation patterns are also examined. The comparative analysis determines an improved performance of the ALE method, convergence, and computational efficiency. Experimental validation confirms that the ALE method reproduces the free surface shape more precisely, avoiding unrealistic topological changes observed in LS simulations. The ALE method faces numerical convergence difficulties for high-power and low-mass filling cases due to mesh element distortion. The proposed ALE-based simulation procedure is a potential numerical optimization tool for enhancing induction melting processes, offering scalable and robust solutions for industrial applications.
Open AccessNumerical Simulation of Free Surface Deformation and Melt Stirring in Induction Melting Using ALE and Level Set Methods
This study investigates fixed and moving mesh methodologies for modeling liquid metal–free surface deformation during the induction melting process. The numerical method employs robust coupling of magnetic fields with the hydrodynamics of the turbulent stirring of liquid metal. Free surface tracking is implemented using the fixed mesh level set (LS) and the moving mesh arbitrary Lagrangian–Eulerian (ALE) formulation. The model’s geometry and operating parameters are designed to replicate a semi-industrial induction melting furnace. Six case studies are analyzed under varying melt masses and coil power levels, with validation performed by comparing experimentally measured free surface profiles and magnetic field distributions. The melt’s stirring velocity and recirculation patterns are also examined. The comparative analysis determines an improved performance of the ALE method, convergence, and computational efficiency. Experimental validation confirms that the ALE method reproduces the free surface shape more precisely, avoiding unrealistic topological changes observed in LS simulations. The ALE method faces numerical convergence difficulties for high-power and low-mass filling cases due to mesh element distortion. The proposed ALE-based simulation procedure is a potential numerical optimization tool for enhancing induction melting processes, offering scalable and robust solutions for industrial applications.
- Open Access
- 6 February 2023
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 23, 3351-3361
Effect of the crucible composition on the Inconel 718 vacuum induction melting process efficiency
- 6 February 2023
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 23, 3351-3361
Open AccessEffect of the crucible composition on the Inconel 718 vacuum induction melting process efficiency
- Open Access
Integration of Hot Isostatic Pressing and Heat Treatment for Advanced Modified γ-TiAl TNM Alloys
The conventional processing route of TNM (Ti-Nb-Mo) alloys combines casting and Hot Isostatic Pressing (HIP) followed by forging and multiple heat treatments to establish optimum properties. This is a time-consuming and costly process. In this study we present an advanced alternative TNM alloy processing route combining HIP and heat treatments into a single process, which we refer to as IHT (integrated HIP heat treatment), applied to a modified TNM alloy with 1.5B. A Quintus HIP lab unit with a quenching module was used, achieving fast and controlled cooling, which differs from the slow cooling rates of conventional HIP units. A Ti-42.5Al-3.5Nb-1Mo-1.5B (at.%) was subjected to an integrated two HIP steps at 200 MPa, one at 1250 °C for 3 h and another at 1260 °C for 1 h, both under a protective Ar atmosphere and followed by cooling at 30 K/min down to room temperature. The results were compared against the Ti-43.5Al-3.5Nb-1Mo-0.8B (at.%) thermomechanically processed in a conventional way. Applying IHT processing to the 1.5B alloy does indeed achieve good creep strength, and the secondary creep rate of the IHT processed materials is similar to that of conventionally forged TNM alloys. Thus, the proposed advanced IHT processing route could manufacture more cost-effective TiAl components.
Open AccessIntegration of Hot Isostatic Pressing and Heat Treatment for Advanced Modified γ-TiAl TNM Alloys
The conventional processing route of TNM (Ti-Nb-Mo) alloys combines casting and Hot Isostatic Pressing (HIP) followed by forging and multiple heat treatments to establish optimum properties. This is a time-consuming and costly process. In this study we present an advanced alternative TNM alloy processing route combining HIP and heat treatments into a single process, which we refer to as IHT (integrated HIP heat treatment), applied to a modified TNM alloy with 1.5B. A Quintus HIP lab unit with a quenching module was used, achieving fast and controlled cooling, which differs from the slow cooling rates of conventional HIP units. A Ti-42.5Al-3.5Nb-1Mo-1.5B (at.%) was subjected to an integrated two HIP steps at 200 MPa, one at 1250 °C for 3 h and another at 1260 °C for 1 h, both under a protective Ar atmosphere and followed by cooling at 30 K/min down to room temperature. The results were compared against the Ti-43.5Al-3.5Nb-1Mo-0.8B (at.%) thermomechanically processed in a conventional way. Applying IHT processing to the 1.5B alloy does indeed achieve good creep strength, and the secondary creep rate of the IHT processed materials is similar to that of conventionally forged TNM alloys. Thus, the proposed advanced IHT processing route could manufacture more cost-effective TiAl components.
- Open Access
- 19 May 2022
- Published by Wolters Kluwer Health in Clinical Nuclear Medicine
- Vol. 47 (7) , 618-624
Sentinel Node Biopsy Imaging in Breast Cancer
Background: Point of injection scatter (SPI) confounds breast cancer sentinel lymph node detection. Round flat lead shields (FLSs) incompletely reduce SPI, requiring repositioning. We designed lead shields that reduce SPI and acquisition time. Methods: Two concave lead shields, a semioval lead shield (OLS) and a semispherical lead alloy shield (SLS), were created with a SICNOVA JCR 1000 3D printer to cover the point of injection (patent no. ES1219895U). Twenty breast cancer patients had anterior and anterior oblique imaging, 5 minutes and 2 hours after a single 111 MBq nanocolloid in 0.2 mL intratumoral or periareolar injection. Each acquisition was 2 minutes. Absolute and normalized background corrected scatter counts (CSCs) and scatter reduction percentage (%SR) related to the FLS were calculated. Repositionings were recorded. Differences between means of %SR (t test) and between means of CSC (analysis of variance) with Holm multiple comparison tests were determined. Results: Mean %SR was 91.8% with OLS and 92% using SLS in early images (P = 0.91) and 87.2%SR in OLS and 88.5% in late images (P = 0.66). There were significant differences between CSC using FLS and OLS (P < 0.001) and between FLS and SLS (P < 0.001), but not between OLS and SLS (P = 0.17) in early images, with the same results observed in delayed studies (P < 0.001 in relation to FLS and P = 0.1 between both curved lead shields). Repositioning was required 14/20 times with FLS, 4/20 times with OLS, and 2/20 times with SLS. Conclusions: We designed 2 concave lead shields that significantly reduce the SPI and repositioning with sentinel lymph node lymphoscintigraphy.
- 19 May 2022
- Published by Wolters Kluwer Health in Clinical Nuclear Medicine
- Vol. 47 (7) , 618-624
Open AccessSentinel Node Biopsy Imaging in Breast Cancer
Background: Point of injection scatter (SPI) confounds breast cancer sentinel lymph node detection. Round flat lead shields (FLSs) incompletely reduce SPI, requiring repositioning. We designed lead shields that reduce SPI and acquisition time. Methods: Two concave lead shields, a semioval lead shield (OLS) and a semispherical lead alloy shield (SLS), were created with a SICNOVA JCR 1000 3D printer to cover the point of injection (patent no. ES1219895U). Twenty breast cancer patients had anterior and anterior oblique imaging, 5 minutes and 2 hours after a single 111 MBq nanocolloid in 0.2 mL intratumoral or periareolar injection. Each acquisition was 2 minutes. Absolute and normalized background corrected scatter counts (CSCs) and scatter reduction percentage (%SR) related to the FLS were calculated. Repositionings were recorded. Differences between means of %SR (t test) and between means of CSC (analysis of variance) with Holm multiple comparison tests were determined. Results: Mean %SR was 91.8% with OLS and 92% using SLS in early images (P = 0.91) and 87.2%SR in OLS and 88.5% in late images (P = 0.66). There were significant differences between CSC using FLS and OLS (P < 0.001) and between FLS and SLS (P < 0.001), but not between OLS and SLS (P = 0.17) in early images, with the same results observed in delayed studies (P < 0.001 in relation to FLS and P = 0.1 between both curved lead shields). Repositioning was required 14/20 times with FLS, 4/20 times with OLS, and 2/20 times with SLS. Conclusions: We designed 2 concave lead shields that significantly reduce the SPI and repositioning with sentinel lymph node lymphoscintigraphy.
- 1 September 2020
- Published by Elsevier in Intermetallics
- Vol. 124, 106842
Evolution of lamellar microstructures in a cast TNM alloy modified with boron through single-step heat treatments
- 1 September 2020
- Published by Elsevier in Intermetallics
- Vol. 124, 106842
Evolution of lamellar microstructures in a cast TNM alloy modified with boron through single-step heat treatments
- Open Access
Effect of Boron Content and Cooling Rate on the Microstructure and Boride Formation of β-Solidifying γ-TiAl TNM Alloy
Boron is a unique and popular grain refiner element in cast titanium aluminide (TiAl) alloys, as it helps to improve mechanical properties if properly alloyed. However, the formation mechanism of different types of borides in cast TiAl alloys is not yet clearly understood. This study seeks to correlate the chemical composition and cooling rate during solidification of cast TiAl alloys, with the type of boride precipitated and the resulting microstructure. Several β-solidifying γ-TiAl alloys of the TNM family were cast, alloying boron to a starting Ti-44.5Al-4Nb-1Mo-0.1B (at.%) alloy. The alloys were manufactured with an induction skull melting furnace and poured into a stepped 2, 4, 8 and 16 mm thickness mold to achieve different cooling rates. On one hand, the results reveal that boron contents below 0.5 at.% and cooling rates during solidification above 10 K/s promote the formation of detrimental ribbon borides. On the other hand, boron contents above 0.5 at.% and cooling rates during solidification below 10 K/s promote the formation of a refined microstructure with blocky borides. Finally, the formation mechanisms of both ribbon and blocky borides are proposed.
Open AccessEffect of Boron Content and Cooling Rate on the Microstructure and Boride Formation of β-Solidifying γ-TiAl TNM Alloy
Boron is a unique and popular grain refiner element in cast titanium aluminide (TiAl) alloys, as it helps to improve mechanical properties if properly alloyed. However, the formation mechanism of different types of borides in cast TiAl alloys is not yet clearly understood. This study seeks to correlate the chemical composition and cooling rate during solidification of cast TiAl alloys, with the type of boride precipitated and the resulting microstructure. Several β-solidifying γ-TiAl alloys of the TNM family were cast, alloying boron to a starting Ti-44.5Al-4Nb-1Mo-0.1B (at.%) alloy. The alloys were manufactured with an induction skull melting furnace and poured into a stepped 2, 4, 8 and 16 mm thickness mold to achieve different cooling rates. On one hand, the results reveal that boron contents below 0.5 at.% and cooling rates during solidification above 10 K/s promote the formation of detrimental ribbon borides. On the other hand, boron contents above 0.5 at.% and cooling rates during solidification below 10 K/s promote the formation of a refined microstructure with blocky borides. Finally, the formation mechanisms of both ribbon and blocky borides are proposed.
- Open Access
Induction Skull Melting of Ti-6Al-4V: Process Control and Efficiency Optimization
Titanium investment casting is one of the leading and most efficient near-net-shape manufacturing processes, since complex shape components are possible to obtain with a very low amount of material waste. But melting these reactive alloys implies the usage of specific melting technologies such as the Induction Skull Melting (ISM) method. In this work the ISM was extensively studied with the aim of deepening the characteristics of this specific melting method and improving the too low energy efficiency and overall process performance. A 16 segment copper crucible and 3 turns coil was employed for the melting of 1 kg of Ti-6Al-4V alloy. Through the calorimetric balance, real-time evolution of the process parameters and power losses arising from the crucible and coil sub-assemblies was displayed. Results revealed the impact of coil working conditions in the overall ISM thermal efficiency and titanium melt properties, revealing the use of these conditions as an effective optimization strategy. This unstudied melting control method allowed more heat into charge and 13% efficiency enhancement; leading to a shorter melting process, less energy consumption and increased melt superheat, which reached 49 °C. The experimental data published in this paper represent a valuable empiric reference for the development and validation of current and future induction heating models.
Open AccessInduction Skull Melting of Ti-6Al-4V: Process Control and Efficiency Optimization
Titanium investment casting is one of the leading and most efficient near-net-shape manufacturing processes, since complex shape components are possible to obtain with a very low amount of material waste. But melting these reactive alloys implies the usage of specific melting technologies such as the Induction Skull Melting (ISM) method. In this work the ISM was extensively studied with the aim of deepening the characteristics of this specific melting method and improving the too low energy efficiency and overall process performance. A 16 segment copper crucible and 3 turns coil was employed for the melting of 1 kg of Ti-6Al-4V alloy. Through the calorimetric balance, real-time evolution of the process parameters and power losses arising from the crucible and coil sub-assemblies was displayed. Results revealed the impact of coil working conditions in the overall ISM thermal efficiency and titanium melt properties, revealing the use of these conditions as an effective optimization strategy. This unstudied melting control method allowed more heat into charge and 13% efficiency enhancement; leading to a shorter melting process, less energy consumption and increased melt superheat, which reached 49 °C. The experimental data published in this paper represent a valuable empiric reference for the development and validation of current and future induction heating models.
- 1 May 2017
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 243, 75-81
α-Case formation in Ti-6Al-4V investment casting using ZrSiO4 and Al2O3 moulds
- 1 May 2017
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 243, 75-81
α-Case formation in Ti-6Al-4V investment casting using ZrSiO4 and Al2O3 moulds