Iñaki Madariaga
Iñaki Madariaga has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Daniel Bernal
Mechanical and Manufacturing Department, Mondragon University, Loramendi 4, 20500 Mondragon, Gipuzkoa, Spain
2 shared publications - Iñaki Hurtado
Mechanical and Manufacturing Department, Mondragon University, Loramendi 4, E20500 Arrasate-Mondragon, Gipuzkoa, Spain
2 shared publications - Xabier Chamorro
Mechanical and Manufacturing Department, Mondragon University, Loramendi 4, 20500 Mondragon, Gipuzkoa, Spain
2 shared publications - David Bürger
Institute for Materials, Ruhr University Bochum, Universitätsstr. 150, 44801 Bochum, Germany
1 shared publication - Inmaculada Lopez-Galilea
Ruhr University Bochum
1 shared publication - Sebastian Weber
Institute for Materials Chair of Materials Technology Ruhr University Bochum Universitätsstraße 150 Bochum Nordrhein‐Westfalen Germany
1 shared publication
Latest Publications
- Open Access
Integration of Hot Isostatic Pressing and Heat Treatment for Advanced Modified γ-TiAl TNM Alloys
The conventional processing route of TNM (Ti-Nb-Mo) alloys combines casting and Hot Isostatic Pressing (HIP) followed by forging and multiple heat treatments to establish optimum properties. This is a time-consuming and costly process. In this study we present an advanced alternative TNM alloy processing route combining HIP and heat treatments into a single process, which we refer to as IHT (integrated HIP heat treatment), applied to a modified TNM alloy with 1.5B. A Quintus HIP lab unit with a quenching module was used, achieving fast and controlled cooling, which differs from the slow cooling rates of conventional HIP units. A Ti-42.5Al-3.5Nb-1Mo-1.5B (at.%) was subjected to an integrated two HIP steps at 200 MPa, one at 1250 °C for 3 h and another at 1260 °C for 1 h, both under a protective Ar atmosphere and followed by cooling at 30 K/min down to room temperature. The results were compared against the Ti-43.5Al-3.5Nb-1Mo-0.8B (at.%) thermomechanically processed in a conventional way. Applying IHT processing to the 1.5B alloy does indeed achieve good creep strength, and the secondary creep rate of the IHT processed materials is similar to that of conventionally forged TNM alloys. Thus, the proposed advanced IHT processing route could manufacture more cost-effective TiAl components.
Open AccessIntegration of Hot Isostatic Pressing and Heat Treatment for Advanced Modified γ-TiAl TNM Alloys
The conventional processing route of TNM (Ti-Nb-Mo) alloys combines casting and Hot Isostatic Pressing (HIP) followed by forging and multiple heat treatments to establish optimum properties. This is a time-consuming and costly process. In this study we present an advanced alternative TNM alloy processing route combining HIP and heat treatments into a single process, which we refer to as IHT (integrated HIP heat treatment), applied to a modified TNM alloy with 1.5B. A Quintus HIP lab unit with a quenching module was used, achieving fast and controlled cooling, which differs from the slow cooling rates of conventional HIP units. A Ti-42.5Al-3.5Nb-1Mo-1.5B (at.%) was subjected to an integrated two HIP steps at 200 MPa, one at 1250 °C for 3 h and another at 1260 °C for 1 h, both under a protective Ar atmosphere and followed by cooling at 30 K/min down to room temperature. The results were compared against the Ti-43.5Al-3.5Nb-1Mo-0.8B (at.%) thermomechanically processed in a conventional way. Applying IHT processing to the 1.5B alloy does indeed achieve good creep strength, and the secondary creep rate of the IHT processed materials is similar to that of conventionally forged TNM alloys. Thus, the proposed advanced IHT processing route could manufacture more cost-effective TiAl components.
- Open Access
Effect of Boron Content and Cooling Rate on the Microstructure and Boride Formation of β-Solidifying γ-TiAl TNM Alloy
Boron is a unique and popular grain refiner element in cast titanium aluminide (TiAl) alloys, as it helps to improve mechanical properties if properly alloyed. However, the formation mechanism of different types of borides in cast TiAl alloys is not yet clearly understood. This study seeks to correlate the chemical composition and cooling rate during solidification of cast TiAl alloys, with the type of boride precipitated and the resulting microstructure. Several β-solidifying γ-TiAl alloys of the TNM family were cast, alloying boron to a starting Ti-44.5Al-4Nb-1Mo-0.1B (at.%) alloy. The alloys were manufactured with an induction skull melting furnace and poured into a stepped 2, 4, 8 and 16 mm thickness mold to achieve different cooling rates. On one hand, the results reveal that boron contents below 0.5 at.% and cooling rates during solidification above 10 K/s promote the formation of detrimental ribbon borides. On the other hand, boron contents above 0.5 at.% and cooling rates during solidification below 10 K/s promote the formation of a refined microstructure with blocky borides. Finally, the formation mechanisms of both ribbon and blocky borides are proposed.
Open AccessEffect of Boron Content and Cooling Rate on the Microstructure and Boride Formation of β-Solidifying γ-TiAl TNM Alloy
Boron is a unique and popular grain refiner element in cast titanium aluminide (TiAl) alloys, as it helps to improve mechanical properties if properly alloyed. However, the formation mechanism of different types of borides in cast TiAl alloys is not yet clearly understood. This study seeks to correlate the chemical composition and cooling rate during solidification of cast TiAl alloys, with the type of boride precipitated and the resulting microstructure. Several β-solidifying γ-TiAl alloys of the TNM family were cast, alloying boron to a starting Ti-44.5Al-4Nb-1Mo-0.1B (at.%) alloy. The alloys were manufactured with an induction skull melting furnace and poured into a stepped 2, 4, 8 and 16 mm thickness mold to achieve different cooling rates. On one hand, the results reveal that boron contents below 0.5 at.% and cooling rates during solidification above 10 K/s promote the formation of detrimental ribbon borides. On the other hand, boron contents above 0.5 at.% and cooling rates during solidification below 10 K/s promote the formation of a refined microstructure with blocky borides. Finally, the formation mechanisms of both ribbon and blocky borides are proposed.